config: Elegoo Neptune 2 config update (#5213)

Signed-off-by: Trey Wentz <trey.wentz@gmail.com>
This commit is contained in:
just-trey 2022-03-14 12:50:38 -04:00 committed by GitHub
parent 02d770ae3c
commit 352f735297
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 30 additions and 15 deletions

View File

@ -1,16 +1,25 @@
# This file contains common pin mappings for the stock Elegoo # This file contains standard pin mappings for the stock Elegoo Neptune 2 with a
# Neptune 2 with a MKS Robin Nano (v1.2.004) board. To use this # ZNP Robin Nano (v 1.2 and v1.3) board.
# config, the firmware should be compiled for the STM32F103. When # For the 1.2 board:
# running "make menuconfig", enable "extra low-level configuration # - Compile with the processor model STM32F103.
# setup", select the 28KiB bootloader, and serial (on # USART3 # - Enable "extra low-level configuration options"
# PB11/PB10) communication. # - Select the 28KiB bootloader,
# - Select (Serial (on # USART3 PB11/PB10) for the communication interface.
# Note that the "make flash" command does not work with MKS Robin # Note that the "make flash" command does not work with ZNP Robin boards. After
# boards. After running "make", run the following command: # running "make", run the following command:
# ./scripts/update_mks_robin.py out/klipper.bin out/elegoo.bin # ./scripts/update_mks_robin.py out/klipper.bin out/elegoo.bin
# Copy the file out/elegoo.bin to an SD card and then restart the #
# printer with that SD card. # For the 1.3 board:
# - Compile with the processor model STM32F407.
# - Enable "extra low-level configuration options"
# - Select the 32KiB bootloader,
# - Select (Serial (on # USART3 PB11/PB10) for the communication interface.
# Note that the "make flash" command does not work with ZNP Robin boards. After
# running "make", run the following command:
# cp out/klipper.bin out/elegoo.bin
#
# Copy the file out/elegoo.bin to an SD card and then restart the printer with
# that SD card.
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
[stepper_x] [stepper_x]
@ -51,7 +60,7 @@ step_pin: PD6
dir_pin: PD3 dir_pin: PD3
enable_pin: !PB3 enable_pin: !PB3
microsteps: 16 microsteps: 16
rotation_distance: 34.406 rotation_distance: 34.406 # use 23.809 as a base before calibration for a 2s
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: PC3 heater_pin: PC3
@ -79,7 +88,7 @@ pid_Kp: 70.857
pid_Ki: 1.221 pid_Ki: 1.221
pid_Kd: 1028.316 pid_Kd: 1028.316
min_temp: 0 min_temp: 0
max_temp: 130 max_temp: 110
[heater_fan hotend_fan] [heater_fan hotend_fan]
pin: PB0 pin: PB0
@ -93,6 +102,12 @@ pin: PB1
serial: /dev/ttyUSB0 serial: /dev/ttyUSB0
restart_method: command restart_method: command
[bed_screws]
screw1: 32.5, 32.5
screw2: 32.5, 202.5
screw3: 202.5, 32.5
screw4: 202.5, 202.5
[printer] [printer]
kinematics: cartesian kinematics: cartesian
max_velocity: 300 max_velocity: 300

View File

@ -161,7 +161,7 @@ CONFIG ../../config/printer-creality-ender3max-2021.cfg
CONFIG ../../config/printer-creality-ender3pro-2020.cfg CONFIG ../../config/printer-creality-ender3pro-2020.cfg
CONFIG ../../config/printer-creality-ender6-2020.cfg CONFIG ../../config/printer-creality-ender6-2020.cfg
CONFIG ../../config/printer-creality-sermoonD1-2021.cfg CONFIG ../../config/printer-creality-sermoonD1-2021.cfg
CONFIG ../../config/printer-elegoo-neptune2-v1.2-2021.cfg CONFIG ../../config/printer-elegoo-neptune2-2021.cfg
CONFIG ../../config/printer-eryone-er20-2021.cfg CONFIG ../../config/printer-eryone-er20-2021.cfg
CONFIG ../../config/printer-flsun-q5-2020.cfg CONFIG ../../config/printer-flsun-q5-2020.cfg
CONFIG ../../config/printer-flsun-qqs-2020.cfg CONFIG ../../config/printer-flsun-qqs-2020.cfg