diff --git a/config/example-extras.cfg b/config/example-extras.cfg
index 8cf5649c..5cd56902 100644
--- a/config/example-extras.cfg
+++ b/config/example-extras.cfg
@@ -55,9 +55,9 @@
 #control_pin:
 #   Pin connected to the BLTouch control pin. This parameter must be
 #   provided.
-#pin_move_time: 0.200
-#   The amount of time (in seconds) that it takes the BLTouch pin to
-#   move up or down. The default is 0.200 seconds.
+#pin_move_time: 0.675
+#   The amount of time (in seconds) to wait for the BLTouch pin to
+#   move up or down. The default is 0.675 seconds.
 #pin_up_reports_not_triggered: True
 #   Set if the BLTouch consistently reports the probe in a "not
 #   triggered" state after a successful "pin_up" command. This should
diff --git a/klippy/extras/bltouch.py b/klippy/extras/bltouch.py
index e95938e2..f18f7153 100644
--- a/klippy/extras/bltouch.py
+++ b/klippy/extras/bltouch.py
@@ -47,7 +47,7 @@ class BLTouchEndstopWrapper:
             'pin_up_touch_mode_reports_triggered', True)
         self.start_mcu_pos = []
         # Calculate pin move time
-        pmt = max(config.getfloat('pin_move_time', 0.200), MIN_CMD_TIME)
+        pmt = max(config.getfloat('pin_move_time', 0.675), MIN_CMD_TIME)
         self.pin_move_time = math.ceil(pmt / SIGNAL_PERIOD) * SIGNAL_PERIOD
         # Wrappers
         self.get_mcu = self.mcu_endstop.get_mcu