From 342d3f1414f905fc85ea14a125463ff2df4e9b51 Mon Sep 17 00:00:00 2001
From: Grigi <nagrigoriadis@gmail.com>
Date: Sun, 23 Oct 2022 15:03:51 +0100
Subject: [PATCH] menu: Conditional display of common Control utils

This will hide features in the Klipper Display menu that isn't applicable
for the machine, therefore we can add extra alignment tools in the Control
menu as well.

Also conditionally displays Setup/Calibration options.

Signed-off-by: Nickolas Grigoriadis <nagrigoriadis@gmail.com>
---
 klippy/extras/display/menu.cfg | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/klippy/extras/display/menu.cfg b/klippy/extras/display/menu.cfg
index d3d99d68..b0df9fc5 100644
--- a/klippy/extras/display/menu.cfg
+++ b/klippy/extras/display/menu.cfg
@@ -24,6 +24,9 @@
 #       + Home All
 #       + Home Z
 #       + Home X/Y
+#       + Z Tilt
+#       + Quad Gantry Lvl
+#       + Bed Mesh
 #       + Steppers off
 #       + Fan: OFF
 #       + Fan speed: 000%
@@ -233,6 +236,24 @@ enable: {not printer.idle_timeout.state == "Printing"}
 name: Home X/Y
 gcode: G28 X Y
 
+[menu __main __control __z_tilt]
+type: command
+enable: {not printer.idle_timeout.state == "Printing" and ('z_tilt' in printer)}
+name: Z Tilt
+gcode: Z_TILT_ADJUST
+
+[menu __main __control __quad_gantry_level]
+type: command
+enable: {not printer.idle_timeout.state == "Printing" and ('quad_gantry_level' in printer)}
+name: Quad Gantry Lvl
+gcode: QUAD_GANTRY_LEVEL
+
+[menu __main __control __bed_mesh]
+type: command
+enable: {not printer.idle_timeout.state == "Printing" and ('bed_mesh' in printer)}
+name: Bed Mesh
+gcode: BED_MESH_CALIBRATE
+
 [menu __main __control __disable]
 type: command
 name: Steppers off
@@ -683,7 +704,7 @@ name: Calibration
 
 [menu __main __setup __calib __delta_calib_auto]
 type: command
-enable: {not printer.idle_timeout.state == "Printing"}
+enable: {(not printer.idle_timeout.state == "Printing") and ('delta_calibrate' in printer)}
 name: Delta cal. auto
 gcode:
     G28
@@ -691,12 +712,12 @@ gcode:
 
 [menu __main __setup __calib __delta_calib_man]
 type: list
-enable: {not printer.idle_timeout.state == "Printing"}
+enable: {(not printer.idle_timeout.state == "Printing") and ('delta_calibrate' in printer)}
 name: Delta cal. man
 
 [menu __main __setup __calib __bedprobe]
 type: command
-enable: {not printer.idle_timeout.state == "Printing"}
+enable: {(not printer.idle_timeout.state == "Printing") and ('probe' in printer)}
 name: Bed probe
 gcode: PROBE