3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

hall_filament_width_sensor: max filament diameter 

Add support for maximum filament diameter to hall filament width sensor.
If the diameter of the filament diameter is larger than the limit, the
virtual runout sensor will trigger. The default value is set to maximum
flow adjustment threshold to prevent oversized filament from clogging.

Signed-off-by: Sami Haahtinen <ressu@ressukka.net>
This commit is contained in:
Sami Haahtinen 2023-12-16 01:03:51 +00:00 committed by KevinOConnor
parent 2defd7374a
commit 3417940fd8
3 changed files with 12 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Config_Changes.md
View File

@ -8,6 +8,12 @@ All dates in this document are approximate.
## Changes
20231216: The `[hall_filament_width_sensor]` is changed to trigger filament runout
when the thickness of the filament exceeds `max_diameter`. The maximum diameter
defaults to `default_nominal_filament_diameter + max_difference`. See
[[hall_filament_width_sensor] configuration
reference](./Config_Reference.md#hall_filament_width_sensor) for more details.
20231207: Several undocumented config parameters in the `[printer]`
config section have been removed (the buffer_time_low,
buffer_time_high, buffer_time_start, and move_flush_time parameters).

3
docs/Config_Reference.md
View File

@ -4429,6 +4429,9 @@ adc2:
# command.
#min_diameter: 1.0
# Minimal diameter for trigger virtual filament_switch_sensor.
#max_diameter:
# Maximum diameter for triggering virtual filament_switch_sensor.
# The default is default_nominal_filament_diameter + max_difference.
#use_current_dia_while_delay: False
# Use the current diameter instead of the nominal diameter while
# the measurement delay has not run through.

5
klippy/extras/hall_filament_width_sensor.py
View File

@ -30,7 +30,8 @@ class HallFilamentWidthSensor:
- self.measurement_max_difference)
self.diameter =self.nominal_filament_dia
self.is_active =config.getboolean('enable', False)
self.runout_dia=config.getfloat('min_diameter', 1.0)
self.runout_dia_min=config.getfloat('min_diameter', 1.0)
self.runout_dia_max=config.getfloat('max_diameter', self.max_diameter)
self.is_log =config.getboolean('logging', False)
# Use the current diameter instead of nominal while the first
# measurement isn't in place
@ -125,7 +126,7 @@ class HallFilamentWidthSensor:
self.update_filament_array(last_epos)
# Check runout
self.runout_helper.note_filament_present(
self.diameter > self.runout_dia)
self.runout_dia_min <= self.diameter <= self.runout_dia_max)
# Does filament exists
if self.diameter > 0.5:
if len(self.filament_array) > 0: