3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Remove tabs from printer-wanhao-duplicator-i3-v2.1-2017.cfg 

Remove tabs from example config file and replace with spaces.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-03-18 11:32:28 -04:00
parent 5c05a24947
commit 310cdf88cc
1 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
View File

@ -34,28 +34,28 @@
# #
# This is the inverse of "E steps" (extruder steps per mm) from the stock # This is the inverse of "E steps" (extruder steps per mm) from the stock
# Wanhao Repetier-based firmware. # Wanhao Repetier-based firmware.
# (See https://3dprinterwiki.info/extruder-steps/ ) # (See https://3dprinterwiki.info/extruder-steps/ )
# #
# For example, if your E-steps are set to 107.0 steps per mm, # For example, if your E-steps are set to 107.0 steps per mm,
# then step_distance should be (1 / 107.0) ~= .009346 # then step_distance should be (1 / 107.0) ~= .009346
# #
# * [extruder] > PID parameters (pid_Kp, pid_Ki, pid_Kd) # * [extruder] > PID parameters (pid_Kp, pid_Ki, pid_Kd)
# * [heater_bed] > PID parameters (pid_Kp, pid_Ki, pid_Kd) # * [heater_bed] > PID parameters (pid_Kp, pid_Ki, pid_Kd)
# #
# PID values from stock Wanhao firmware (Repetier) do not # PID values from stock Wanhao firmware (Repetier) do not
# translate directly to klipper. You will need to run klipper's # translate directly to klipper. You will need to run klipper's
# PID autotune function for the extruder and bed. After getting the # PID autotune function for the extruder and bed. After getting the
# klipper firmware up and running, run the M303 autotune procedures # klipper firmware up and running, run the M303 autotune procedures
# by sending these commands via octoprint terminal (one per autotune): # by sending these commands via octoprint terminal (one per autotune):
# #
# extruder: M303 E0 S<temp> # extruder: M303 E0 S<temp>
# heated bed: M303 E-1 S<temp> # heated bed: M303 E-1 S<temp>
# #
# After the autotune process completes, PID parameter results # After the autotune process completes, PID parameter results
# can be found in the Octoprint terminal tab (if you're quick) # can be found in the Octoprint terminal tab (if you're quick)
# or in /tmp/klippy.log. # or in /tmp/klippy.log.
# #
# Enter the PID parameters into the appropriate sections of ~/printer.cfg . # Enter the PID parameters into the appropriate sections of ~/printer.cfg .
# #
# * [extruder] > max_temp # * [extruder] > max_temp
# * [heater_bed] > max_temp # * [heater_bed] > max_temp
@ -68,7 +68,7 @@
# * [mcu] > serial # * [mcu] > serial
# #
# Enter the USB serial port of the printer in /dev/serial/by-id/ format # Enter the USB serial port of the printer in /dev/serial/by-id/ format
# for best results. # for best results.
# #
# - Power cycle the Wanhao Duplicator i3 # - Power cycle the Wanhao Duplicator i3
# #