config: added a configuration file for FLSUN QQ-S Pro delta printer (#4237)
Signed-off-by: Joseph Orduna <joey.orduna@gmail.com>
This commit is contained in:
parent
7266882201
commit
274d52729a
|
@ -8,7 +8,7 @@
|
|||
|
||||
# Note that the "make flash" command does not work with MKS Robin
|
||||
# boards. After running "make", run the following command:
|
||||
# ./scripts/update_mks_robin.py out/klipper.bin out/Robin_nano.bin
|
||||
# ./scripts/update_mks_robin.py out/klipper.bin out/Robin_mini.bin
|
||||
# Copy the file out/Robin_nano.bin to an SD card and then restart the
|
||||
# printer with that SD card.
|
||||
|
||||
|
|
|
@ -0,0 +1,104 @@
|
|||
# This file contains common configurations and pin mappings
|
||||
# for the Flsun QQ-S using the MKS Robin Mini board.
|
||||
#
|
||||
# To use this config, the firmware should be compiled for the
|
||||
# STM32F103. When running "make menuconfig", enable "extra low-level
|
||||
# configuration setup", select the 28KiB bootloader, and serial (on
|
||||
# USART3 PB11/PB10) communication.
|
||||
|
||||
# Note that the "make flash" command does not work with MKS Robin
|
||||
# boards. After running "make", run the following command:
|
||||
# ./scripts/update_mks_robin.py out/klipper.bin out/Robin_mini.bin
|
||||
# Copy the file out/Robin_mini.bin to an SD card and then restart the
|
||||
# printer with that SD card.
|
||||
|
||||
# For more detailed instructions on how to set Klipper up for this printer,
|
||||
# follow this guide: https://github.com/CobraPi/Klipper-Firmware-FLSUN-QQ-S-Pro
|
||||
|
||||
# See docs/Config_Reference.md for a description of parameters.
|
||||
|
||||
[mcu]
|
||||
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
|
||||
restart_method: command
|
||||
|
||||
[printer]
|
||||
kinematics: delta
|
||||
max_velocity: 500
|
||||
max_accel: 3000
|
||||
max_z_velocity: 200
|
||||
delta_radius: 130
|
||||
print_radius: 125
|
||||
|
||||
[stepper_a]
|
||||
step_pin: PE3
|
||||
dir_pin: PE2
|
||||
enable_pin: !PE4
|
||||
rotation_distance: 32
|
||||
endstop_pin: PA15
|
||||
microsteps: 16
|
||||
homing_speed: 60
|
||||
position_endstop: 370
|
||||
arm_length: 280.0
|
||||
|
||||
[stepper_b]
|
||||
step_pin: PE0
|
||||
dir_pin: PB9
|
||||
enable_pin: !PE1
|
||||
rotation_distance: 32
|
||||
endstop_pin: PA12
|
||||
microsteps: 16
|
||||
|
||||
[stepper_c]
|
||||
step_pin: PB5
|
||||
dir_pin: PB4
|
||||
enable_pin: !PB8
|
||||
rotation_distance: 32
|
||||
endstop_pin: PC4
|
||||
microsteps: 16
|
||||
|
||||
[probe]
|
||||
pin: !PA11
|
||||
x_offset: 0
|
||||
y_offset: 0
|
||||
z_offset: 18
|
||||
samples: 3
|
||||
samples_result: average
|
||||
sample_retract_dist: 5
|
||||
samples_tolerance: 0.02
|
||||
samples_tolerance_retries: 5
|
||||
|
||||
[delta_calibrate]
|
||||
radius: 125
|
||||
horizontal_move_z: 25
|
||||
|
||||
[extruder]
|
||||
step_pin: PD6
|
||||
dir_pin: !PD3
|
||||
enable_pin: !PB3
|
||||
rotation_distance: 9
|
||||
microsteps: 16
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.750
|
||||
heater_pin: PC3
|
||||
sensor_type: EPCOS 100K B57560G104F
|
||||
sensor_pin: PC1
|
||||
control: pid
|
||||
pid_Kp: 14.529
|
||||
pid_Ki: 0.557
|
||||
pid_Kd: 94.802
|
||||
min_temp: 0
|
||||
max_temp: 260
|
||||
|
||||
[heater_bed]
|
||||
heater_pin: PA0
|
||||
sensor_type: EPCOS 100K B57560G104F
|
||||
sensor_pin: PC0
|
||||
control: pid
|
||||
pid_Kp: 325.10
|
||||
pid_Ki: 63.35
|
||||
pid_Kd: 417.10
|
||||
min_temp: 0
|
||||
max_temp: 150
|
||||
|
||||
[fan]
|
||||
pin: PB1
|
|
@ -156,6 +156,7 @@ CONFIG ../../config/printer-creality-ender3max-2021.cfg
|
|||
CONFIG ../../config/printer-creality-ender3pro-2020.cfg
|
||||
CONFIG ../../config/printer-creality-ender6-2020.cfg
|
||||
CONFIG ../../config/printer-flsun-q5-2020.cfg
|
||||
CONFIG ../../config/printer-flsun-qqs-2020.cfg
|
||||
CONFIG ../../config/printer-fokoos-odin5-f3-2021.cfg
|
||||
CONFIG ../../config/printer-tronxy-x5sa-v6-2019.cfg
|
||||
CONFIG ../../config/printer-tronxy-x5sa-pro-2020.cfg
|
||||
|
|
Loading…
Reference in New Issue