3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Move SET_TEMPERATURE_FAN_TARGET to its own section in G-Codes.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-07-26 10:41:43 -04:00
parent ab923883f7
commit 25a9a32ecb
1 changed files with 9 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
docs/G-Codes.md
View File

@ -210,8 +210,6 @@ The following standard commands are supported:
defaults to "display" (the primary display). defaults to "display" (the primary display).
- `SET_IDLE_TIMEOUT [TIMEOUT=<timeout>]`: Allows the user to set the - `SET_IDLE_TIMEOUT [TIMEOUT=<timeout>]`: Allows the user to set the
idle timeout (in seconds). idle timeout (in seconds).
- `SET_TEMPERATURE_FAN_TARGET temperature_fan=<temperature_fan_name> [target=<target_temperature>]`:
Sets the target temperature for a temperature_fan. If a target is not supplied, it is set to the specified temperature in the config file.
- `RESTART`: This will cause the host software to reload its config - `RESTART`: This will cause the host software to reload its config
and perform an internal reset. This command will not clear error and perform an internal reset. This command will not clear error
state from the micro-controller (see FIRMWARE_RESTART) nor will it state from the micro-controller (see FIRMWARE_RESTART) nor will it
@ -614,3 +612,12 @@ been enabled:
of SHAPER_TYPE_X and SHAPER_TYPE_Y parameters. See of SHAPER_TYPE_X and SHAPER_TYPE_Y parameters. See
[example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg) [example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg)
for more details on each of these parameters. for more details on each of these parameters.
## Temperature Fan Commands
The following command is available when a "temperature_fan" config
section is enabled:
- `SET_TEMPERATURE_FAN_TARGET temperature_fan=<temperature_fan_name>
[target=<target_temperature>]`: Sets the target temperature for a
temperature_fan. If a target is not supplied, it is set to the
specified temperature in the config file.