3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Simplify generic-bigtreetech-skr-v1.3.cfg 

Move the TMC2208 and TMC2130 blocks to later in the file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-07-11 18:50:26 -04:00
parent 28aa2f507a
commit 25438a7901
1 changed files with 82 additions and 90 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

172
config/generic-bigtreetech-skr-v1.3.cfg
View File

@ -4,10 +4,85 @@
# See the example.cfg file for a description of available parameters.
[stepper_x]
step_pin: P2.2
dir_pin: !P2.6
enable_pin: !P2.1
step_distance: .0125
endstop_pin: P1.29 # P1.28 for X-max
position_endstop: 0
position_max: 320
homing_speed: 50
########################
[stepper_y]
step_pin: P0.19
dir_pin: !P0.20
enable_pin: !P2.8
step_distance: .0125
endstop_pin: P1.27 # P1.26 for Y-max
position_endstop: 0
position_max: 300
homing_speed: 50
[stepper_z]
step_pin: P0.22
dir_pin: P2.11
enable_pin: !P0.21
step_distance: .0025
endstop_pin: P1.25 # P1.24 for Z-max
position_endstop: 0.5
position_max: 400
[extruder]
step_pin: P2.13
dir_pin: !P0.11
enable_pin: !P2.12
step_distance: .010526
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: P2.7
sensor_type: EPCOS 100K B57560G104F
sensor_pin: P0.24
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 260
#[extruder1]
#step_pin: P0.1
#dir_pin: P0.0
#enable_pin: !P0.10
#heater_pin: P2.4
#sensor_pin: P0.25
#...
[heater_bed]
heater_pin: P2.5
sensor_type: ATC Semitec 104GT-2
sensor_pin: P0.23
control: watermark
min_temp: 0
max_temp: 130
[fan]
pin: P2.3
[mcu]
serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
[printer]
kinematics: cartesian
max_velocity: 200
max_accel: 2000
max_z_velocity: 25
max_z_accel: 100
########################################
# TMC2208 configuration
########################
########################################
# For TMC2208 UART
# 1) Remove all of the jumpers below the stepper drivers
@ -49,9 +124,9 @@
#stealthchop_threshold: 5
########################
########################################
# TMC2130 configuration
########################
########################################
# For TMC SPI
# 1) Place jumpers on all the red pin headers under the stepper drivers
@ -113,92 +188,9 @@
#stealthchop_threshold: 5
########################
# Main configuration
########################
## Basic steppers configuration ##
[stepper_x]
step_pin: P2.2
dir_pin: !P2.6
enable_pin: !P2.1
step_distance: .0125
endstop_pin: P1.29 # P1.28 for X-max
position_endstop: 0
position_max: 320
homing_speed: 50
[stepper_y]
step_pin: P0.19
dir_pin: !P0.20
enable_pin: !P2.8
step_distance: .0125
endstop_pin: P1.27 # P1.26 for Y-max
position_endstop: 0
position_max: 300
homing_speed: 50
[stepper_z]
step_pin: P0.22
dir_pin: P2.11
enable_pin: !P0.21
step_distance: .0025
endstop_pin: P1.25 # P1.24 for Z-max
position_endstop: 0.5
position_max: 400
## Extruder configuration ##
[extruder]
step_pin: P2.13
dir_pin: !P0.11
enable_pin: !P2.12
step_distance: .010526
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: P2.7
sensor_type: EPCOS 100K B57560G104F
sensor_pin: P0.24
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 260
#[extruder1]
#step_pin: P0.1
#dir_pin: P0.0
#enable_pin: !P0.10
#heater_pin: P2.4
#sensor_pin: P0.25
#...
## Heatbed configuration ##
[heater_bed]
heater_pin: P2.5
sensor_type: ATC Semitec 104GT-2
sensor_pin: P0.23
control: watermark
min_temp: 0
max_temp: 130
## Additional configuration ##
[fan]
pin: P2.3
[mcu]
serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
[printer]
kinematics: cartesian
max_velocity: 200
max_accel: 2000
max_z_velocity: 25
max_z_accel: 100
########################################
# Optional LCD configuration
########################################
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
#[display]