From 25438a790199e16c64b56817f8fa15628849e8cd Mon Sep 17 00:00:00 2001
From: Kevin O'Connor <kevin@koconnor.net>
Date: Thu, 11 Jul 2019 18:50:26 -0400
Subject: [PATCH] config: Simplify generic-bigtreetech-skr-v1.3.cfg

Move the TMC2208 and TMC2130 blocks to later in the file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
---
 config/generic-bigtreetech-skr-v1.3.cfg | 172 +++++++++++-------------
 1 file changed, 82 insertions(+), 90 deletions(-)

diff --git a/config/generic-bigtreetech-skr-v1.3.cfg b/config/generic-bigtreetech-skr-v1.3.cfg
index 412657de..b4844dd7 100644
--- a/config/generic-bigtreetech-skr-v1.3.cfg
+++ b/config/generic-bigtreetech-skr-v1.3.cfg
@@ -4,10 +4,85 @@
 
 # See the example.cfg file for a description of available parameters.
 
+[stepper_x]
+step_pin: P2.2
+dir_pin: !P2.6
+enable_pin: !P2.1
+step_distance: .0125
+endstop_pin: P1.29  # P1.28 for X-max
+position_endstop: 0
+position_max: 320
+homing_speed: 50
 
-########################
+[stepper_y]
+step_pin: P0.19
+dir_pin: !P0.20
+enable_pin: !P2.8
+step_distance: .0125
+endstop_pin: P1.27  # P1.26 for Y-max
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: P0.22
+dir_pin: P2.11
+enable_pin: !P0.21
+step_distance: .0025
+endstop_pin: P1.25  # P1.24 for Z-max
+position_endstop: 0.5
+position_max: 400
+
+[extruder]
+step_pin: P2.13
+dir_pin: !P0.11
+enable_pin: !P2.12
+step_distance: .010526
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: P0.1
+#dir_pin: P0.0
+#enable_pin: !P0.10
+#heater_pin: P2.4
+#sensor_pin: P0.25
+#...
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: P0.23
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.3
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 200
+max_accel: 2000
+max_z_velocity: 25
+max_z_accel: 100
+
+
+########################################
 # TMC2208 configuration
-########################
+########################################
 
 # For TMC2208 UART
 #   1) Remove all of the jumpers below the stepper drivers
@@ -49,9 +124,9 @@
 #stealthchop_threshold: 5
 
 
-########################
+########################################
 # TMC2130 configuration
-########################
+########################################
 
 # For TMC SPI
 #   1) Place jumpers on all the red pin headers under the stepper drivers
@@ -113,92 +188,9 @@
 #stealthchop_threshold: 5
 
 
-########################
-# Main configuration
-########################
-
-## Basic steppers configuration ##
-
-[stepper_x]
-step_pin: P2.2
-dir_pin: !P2.6
-enable_pin: !P2.1
-step_distance: .0125
-endstop_pin: P1.29  # P1.28 for X-max
-position_endstop: 0
-position_max: 320
-homing_speed: 50
-
-[stepper_y]
-step_pin: P0.19
-dir_pin: !P0.20
-enable_pin: !P2.8
-step_distance: .0125
-endstop_pin: P1.27  # P1.26 for Y-max
-position_endstop: 0
-position_max: 300
-homing_speed: 50
-
-[stepper_z]
-step_pin: P0.22
-dir_pin: P2.11
-enable_pin: !P0.21
-step_distance: .0025
-endstop_pin: P1.25  # P1.24 for Z-max
-position_endstop: 0.5
-position_max: 400
-
-## Extruder configuration ##
-
-[extruder]
-step_pin: P2.13
-dir_pin: !P0.11
-enable_pin: !P2.12
-step_distance: .010526
-nozzle_diameter: 0.400
-filament_diameter: 1.750
-heater_pin: P2.7
-sensor_type: EPCOS 100K B57560G104F
-sensor_pin: P0.24
-control: pid
-pid_Kp: 22.2
-pid_Ki: 1.08
-pid_Kd: 114
-min_temp: 0
-max_temp: 260
-
-#[extruder1]
-#step_pin: P0.1
-#dir_pin: P0.0
-#enable_pin: !P0.10
-#heater_pin: P2.4
-#sensor_pin: P0.25
-#...
-
-## Heatbed configuration ##
-
-[heater_bed]
-heater_pin: P2.5
-sensor_type: ATC Semitec 104GT-2
-sensor_pin: P0.23
-control: watermark
-min_temp: 0
-max_temp: 130
-
-## Additional configuration ##
-
-[fan]
-pin: P2.3
-
-[mcu]
-serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
-
-[printer]
-kinematics: cartesian
-max_velocity: 200
-max_accel: 2000
-max_z_velocity: 25
-max_z_accel: 100
+########################################
+# Optional LCD configuration
+########################################
 
 # "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
 #[display]