3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Display M73-indicated progress plus linear ETA on ST7920 displays. 

Signed-off-by: Mathis Beer <mathis_beer@yahoo.de>
This commit is contained in:
FeepingCreature 2018-05-22 00:06:07 +02:00 committed by KevinOConnor
parent d7b29eca47
commit 237c242d65
1 changed files with 29 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
klippy/extras/display.py
View File

@ -447,6 +447,8 @@ class PrinterLCD:
self.extruder0 = self.printer.lookup_object('extruder0', None)
self.extruder1 = self.printer.lookup_object('extruder1', None)
self.heater_bed = self.printer.lookup_object('heater_bed', None)
self.progress = None
self.gcode.register_command('M73', self.cmd_M73)
# Load glyphs
self.load_glyph(self.BED1_GLYPH, heat1_icon)
self.load_glyph(self.BED2_GLYPH, heat2_icon)
@ -556,23 +558,44 @@ class PrinterLCD:
self.animate_glyphs(eventtime, 10, 0, self.FAN1_GLYPH,
info['speed'] != 0.)
self.draw_percent(12, 0, 4, info['speed'])
progress = None
# SD card print progress
if self.sdcard is not None:
info = self.sdcard.get_status(eventtime)
progress = info['progress']
elif self.progress is not None:
progress = self.progress / 100.
if progress is not None:
if extruder_count == 1:
x, y, width = 0, 2, 10
else:
x, y, width = 10, 1, 6
self.draw_percent(x, y, width, info['progress'])
self.draw_progress_bar(x, y, width, info['progress'])
self.draw_percent(x, y, width, progress)
self.draw_progress_bar(x, y, width, progress)
# G-Code speed factor
gcode_info = self.gcode.get_status(eventtime)
if extruder_count == 1:
self.draw_icon(10, 1, feedrate_icon)
self.draw_percent(12, 1, 4, gcode_info['speed_factor'])
# Printing time and status
toolhead_info = self.toolhead.get_status(eventtime)
self.draw_time(10, 2, toolhead_info['printing_time'])
printing_time = toolhead_info['printing_time']
remaining_time = None
if progress is not None and progress > 0:
remaining_time = int(printing_time / progress) - printing_time
# switch mode every 6s
if remaining_time is not None and int(eventtime) % 12 < 6:
self.lcd_chip.write_text(10, 2, "-")
self.draw_time(11, 2, remaining_time)
else:
offset = 1 if printing_time < 100 * 60 * 60 else 0
self.draw_time(10 + offset, 2, printing_time)
self.draw_status(0, 3, gcode_info, toolhead_info)
# Screen update helpers
def draw_heater(self, x, y, info):
@ -597,6 +620,9 @@ class PrinterLCD:
pos = self.toolhead.get_position()
status = "X%-4.0fY%-4.0fZ%-5.2f" % (pos[0], pos[1], pos[2])
self.lcd_chip.write_text(x, y, status)
# print progress: M73 P<percent>
def cmd_M73(self, params):
self.progress = self.gcode.get_int('P', params, minval=0, maxval=100)
def load_config(config):
return PrinterLCD(config)