3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Minor updates to example-extras.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-07-12 12:18:31 -04:00
parent 32a85edb16
commit 21563c5965
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
config/example-extras.cfg
View File

@ -241,8 +241,8 @@
# Temperature-triggered cooling fans (one may define any number of
# sections with a "temperature_fan" prefix). A "temperature fan" is a
# fan that will be enabled whenever its associated sensor is above a
# set temperature. By default, a heater_fan has a shutdown_speed equal
# to max_power.
# set temperature. By default, a temperature_fan has a shutdown_speed
# equal to max_power.
#[temperature_fan my_temp_fan]
#pin:
#max_power:
@ -273,9 +273,9 @@
# will be set to when the sensor temperature exceeds the set value.
# The default is 1.0.
#min_speed: 0.3
# The minumin fan speed (expressed as a value from 0.0 to 1.0) that the fan
# will be set to when the sensor temperature is the set value.
# The default is 0.3.
# The minimum fan speed (expressed as a value from 0.0 to 1.0) that
# the fan will be set to when the sensor temperature is the set
# value. The default is 0.3.
#control: watermark
# Control algorithm (either watermark or pid). This parameter must
# be provided.
@ -347,10 +347,10 @@
# The pin to configure as an output. This parameter must be
# provided.
#pwm: False
# Set if the output pin should be capable of
# pulse-width-modulation. If this is true, the value fields should
# be between 0 and 1; if it is false the value fields should be
# either 0 or 1. The default is False.
# Set if the output pin should be capable of pulse-width-modulation.
# If this is true, the value fields should be between 0 and 1; if it
# is false the value fields should be either 0 or 1. The default is
# False.
#static_value:
# If this is set, then the pin is assigned to this value at startup
# and the pin can not be changed during runtime. A static pin uses