stm32: stm32g0b1 fdcan support (#5488)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
This commit is contained in:
BIGTREETECH
GitHub
parent
af38d708cb
commit
1ff7261203
|
|
@ -101,6 +101,9 @@ config HAVE_STM32_USBOTG
|
||||||
config HAVE_STM32_CANBUS
|
config HAVE_STM32_CANBUS
|
||||||
bool
|
bool
|
||||||
default y if MACH_STM32F1 || MACH_STM32F2 || MACH_STM32F4x5 || MACH_STM32F446 || MACH_STM32F0x2
|
default y if MACH_STM32F1 || MACH_STM32F2 || MACH_STM32F4x5 || MACH_STM32F446 || MACH_STM32F0x2
|
||||||
|
config HAVE_STM32_FDCANBUS
|
||||||
|
bool
|
||||||
|
default y if MACH_STM32G0
|
||||||
|
|
||||||
config MCU
|
config MCU
|
||||||
string
|
string
|
||||||
|
|
@ -275,6 +278,8 @@ config SERIAL
|
||||||
bool
|
bool
|
||||||
config CANSERIAL
|
config CANSERIAL
|
||||||
bool
|
bool
|
||||||
|
config FDCANSERIAL
|
||||||
|
bool
|
||||||
choice
|
choice
|
||||||
prompt "Communication interface"
|
prompt "Communication interface"
|
||||||
config STM32_USB_PA11_PA12
|
config STM32_USB_PA11_PA12
|
||||||
|
|
@ -342,10 +347,14 @@ choice
|
||||||
bool "CAN bus (on PD0/PD1)" if LOW_LEVEL_OPTIONS
|
bool "CAN bus (on PD0/PD1)" if LOW_LEVEL_OPTIONS
|
||||||
depends on HAVE_STM32_CANBUS
|
depends on HAVE_STM32_CANBUS
|
||||||
select CANSERIAL
|
select CANSERIAL
|
||||||
|
config STM32_CANBUS_PB0_PB1
|
||||||
|
bool "CAN bus (on PB0/PB1)" if LOW_LEVEL_OPTIONS
|
||||||
|
depends on HAVE_STM32_FDCANBUS
|
||||||
|
select FDCANSERIAL
|
||||||
endchoice
|
endchoice
|
||||||
|
|
||||||
config CANBUS_FREQUENCY
|
config CANBUS_FREQUENCY
|
||||||
int "CAN bus speed" if LOW_LEVEL_OPTIONS && CANSERIAL
|
int "CAN bus speed" if LOW_LEVEL_OPTIONS && (CANSERIAL || FDCANSERIAL)
|
||||||
default 500000
|
default 500000
|
||||||
|
|
||||||
endif
|
endif
|
||||||
|
|
|
||||||
|
|
@ -61,9 +61,12 @@ serial-src-$(CONFIG_MACH_STM32H7) := stm32/stm32h7_serial.c
|
||||||
src-$(CONFIG_SERIAL) += $(serial-src-y) generic/serial_irq.c
|
src-$(CONFIG_SERIAL) += $(serial-src-y) generic/serial_irq.c
|
||||||
src-$(CONFIG_CANSERIAL) += stm32/can.c ../lib/fast-hash/fasthash.c
|
src-$(CONFIG_CANSERIAL) += stm32/can.c ../lib/fast-hash/fasthash.c
|
||||||
src-$(CONFIG_CANSERIAL) += generic/canbus.c
|
src-$(CONFIG_CANSERIAL) += generic/canbus.c
|
||||||
|
src-$(CONFIG_FDCANSERIAL) += stm32/fdcan.c ../lib/fast-hash/fasthash.c
|
||||||
|
src-$(CONFIG_FDCANSERIAL) += generic/canbus.c
|
||||||
src-$(CONFIG_HAVE_GPIO_HARD_PWM) += stm32/hard_pwm.c
|
src-$(CONFIG_HAVE_GPIO_HARD_PWM) += stm32/hard_pwm.c
|
||||||
|
|
||||||
dirs-$(CONFIG_CANSERIAL) += lib/fast-hash
|
dirs-$(CONFIG_CANSERIAL) += lib/fast-hash
|
||||||
|
dirs-$(CONFIG_FDCANSERIAL) += lib/fast-hash
|
||||||
|
|
||||||
# Binary output file rules
|
# Binary output file rules
|
||||||
target-y += $(OUT)klipper.bin
|
target-y += $(OUT)klipper.bin
|
||||||
|
|
|
||||||
|
|
@ -252,7 +252,7 @@ compute_btr(uint32_t pclock, uint32_t bitrate)
|
||||||
|
|
||||||
uint32_t bit_clocks = pclock / bitrate; // clock ticks per bit
|
uint32_t bit_clocks = pclock / bitrate; // clock ticks per bit
|
||||||
|
|
||||||
uint32_t sjw = 2;
|
uint32_t sjw = 2;
|
||||||
uint32_t qs;
|
uint32_t qs;
|
||||||
// Find number of time quantas that gives us the exact wanted bit time
|
// Find number of time quantas that gives us the exact wanted bit time
|
||||||
for (qs = 18; qs > 9; qs--) {
|
for (qs = 18; qs > 9; qs--) {
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,331 @@
|
||||||
|
// Serial over CAN emulation for STM32 boards.
|
||||||
|
//
|
||||||
|
// Copyright (C) 2019 Eug Krashtan <eug.krashtan@gmail.com>
|
||||||
|
// Copyright (C) 2020 Pontus Borg <glpontus@gmail.com>
|
||||||
|
// Copyright (C) 2021 Kevin O'Connor <kevin@koconnor.net>
|
||||||
|
//
|
||||||
|
// This file may be distributed under the terms of the GNU GPLv3 license.
|
||||||
|
|
||||||
|
#include <string.h> // memcpy
|
||||||
|
#include "autoconf.h" // CONFIG_MACH_STM32F1
|
||||||
|
#include "board/irq.h" // irq_disable
|
||||||
|
#include "command.h" // DECL_CONSTANT_STR
|
||||||
|
#include "fasthash.h" // fasthash64
|
||||||
|
#include "generic/armcm_boot.h" // armcm_enable_irq
|
||||||
|
#include "generic/canbus.h" // canbus_notify_tx
|
||||||
|
#include "generic/serial_irq.h" // serial_rx_byte
|
||||||
|
#include "internal.h" // enable_pclock
|
||||||
|
#include "sched.h" // DECL_INIT
|
||||||
|
|
||||||
|
/*
|
||||||
|
FDCAN max date length = 64bytes
|
||||||
|
data_len[] is the data length & DLC mapping table
|
||||||
|
Required when the data length exceeds 64bytes
|
||||||
|
*/
|
||||||
|
uint8_t data_len[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, 24, 32, 48, 64};
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
uint32_t RESERVED0 : 18;
|
||||||
|
__IO uint32_t ID : 11;
|
||||||
|
__IO uint32_t RTR : 1;
|
||||||
|
__IO uint32_t XTD : 1;
|
||||||
|
__IO uint32_t ESI : 1;
|
||||||
|
__IO uint32_t RXTS : 16;
|
||||||
|
__IO uint32_t DLC : 4;
|
||||||
|
__IO uint32_t BRS : 1;
|
||||||
|
__IO uint32_t FDF : 1;
|
||||||
|
uint32_t RESERVED1 : 2;
|
||||||
|
__IO uint32_t FIDX : 7;
|
||||||
|
__IO uint32_t ANMF : 1;
|
||||||
|
__IO uint8_t data[64];
|
||||||
|
}FDCAN_RX_FIFO_TypeDef;
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
__IO uint32_t id_section;
|
||||||
|
__IO uint32_t dlc_section;
|
||||||
|
__IO uint32_t data[64 / 4];
|
||||||
|
}FDCAN_TX_FIFO_TypeDef;
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
__IO uint32_t FLS[28]; // Filter list standard
|
||||||
|
__IO uint32_t FLE[16]; // Filter list extended
|
||||||
|
FDCAN_RX_FIFO_TypeDef RXF0[3];
|
||||||
|
FDCAN_RX_FIFO_TypeDef RXF1[3];
|
||||||
|
__IO uint32_t TEF[6]; // Tx event FIFO
|
||||||
|
FDCAN_TX_FIFO_TypeDef TXFIFO[3];
|
||||||
|
}FDCAN_MSG_RAM_TypeDef;
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
FDCAN_MSG_RAM_TypeDef fdcan1;
|
||||||
|
FDCAN_MSG_RAM_TypeDef fdcan2;
|
||||||
|
}FDCAN_RAM_TypeDef;
|
||||||
|
|
||||||
|
FDCAN_RAM_TypeDef *fdcan_ram = (FDCAN_RAM_TypeDef *)(SRAMCAN_BASE);
|
||||||
|
|
||||||
|
#define FDCAN_IE_RX_FIFO0 (FDCAN_IE_RF0NE | FDCAN_IE_RF0FE | FDCAN_IE_RF0LE)
|
||||||
|
#define FDCAN_IE_RX_FIFO1 (FDCAN_IE_RF1NE | FDCAN_IE_RF1FE | FDCAN_IE_RF1LE)
|
||||||
|
#define FDCAN_IE_TC (FDCAN_IE_TCE | FDCAN_IE_TCFE | FDCAN_IE_TFEE)
|
||||||
|
|
||||||
|
#if CONFIG_STM32_CANBUS_PB0_PB1
|
||||||
|
DECL_CONSTANT_STR("RESERVE_PINS_CAN", "PB0,PB1");
|
||||||
|
#define GPIO_Rx GPIO('B', 0)
|
||||||
|
#define GPIO_Tx GPIO('B', 1)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if CONFIG_MACH_STM32G0
|
||||||
|
#if CONFIG_STM32_CANBUS_PB0_PB1
|
||||||
|
#define SOC_CAN FDCAN2
|
||||||
|
#define MSG_RAM fdcan_ram->fdcan2
|
||||||
|
#else
|
||||||
|
#error Uknown pins for STMF32G0 CAN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define CAN_IT0_IRQn TIM16_FDCAN_IT0_IRQn
|
||||||
|
#define CAN_IT1_IRQn TIM17_FDCAN_IT1_IRQn
|
||||||
|
#define CAN_FUNCTION GPIO_FUNCTION(3) // Alternative function mapping number
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef SOC_CAN
|
||||||
|
#error No known CAN device for configured MCU
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Read the next CAN packet
|
||||||
|
int
|
||||||
|
canbus_read(uint32_t *id, uint8_t *data)
|
||||||
|
{
|
||||||
|
if (!(SOC_CAN->RXF0S & FDCAN_RXF0S_F0FL)) {
|
||||||
|
// All rx mboxes empty, enable wake on rx IRQ
|
||||||
|
irq_disable();
|
||||||
|
SOC_CAN->IE |= FDCAN_IE_RF0NE;
|
||||||
|
irq_enable();
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Read and ack packet
|
||||||
|
uint32_t r_index = ((SOC_CAN->RXF0S & FDCAN_RXF0S_F0GI)
|
||||||
|
>> FDCAN_RXF0S_F0GI_Pos);
|
||||||
|
FDCAN_RX_FIFO_TypeDef *rxf0 = &MSG_RAM.RXF0[r_index];
|
||||||
|
uint32_t dlc = rxf0->DLC;
|
||||||
|
*id = rxf0->ID;
|
||||||
|
for (uint8_t i = 0; i < dlc; i++) {
|
||||||
|
data[i] = rxf0->data[i];
|
||||||
|
}
|
||||||
|
SOC_CAN->RXF0A = r_index;
|
||||||
|
|
||||||
|
return dlc;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Transmit a packet
|
||||||
|
int
|
||||||
|
canbus_send(uint32_t id, uint32_t len, uint8_t *data)
|
||||||
|
{
|
||||||
|
uint32_t txfqs = SOC_CAN->TXFQS;
|
||||||
|
if (txfqs & FDCAN_TXFQS_TFQF) {
|
||||||
|
// No space in transmit fifo - enable tx irq
|
||||||
|
irq_disable();
|
||||||
|
SOC_CAN->IE |= FDCAN_IE_TC;
|
||||||
|
irq_enable();
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t w_index = ((txfqs & FDCAN_TXFQS_TFQPI) >> FDCAN_TXFQS_TFQPI_Pos);
|
||||||
|
FDCAN_TX_FIFO_TypeDef *txfifo = &MSG_RAM.TXFIFO[w_index];
|
||||||
|
txfifo->id_section = id << 18;
|
||||||
|
txfifo->dlc_section = len << 16;
|
||||||
|
if (len) {
|
||||||
|
txfifo->data[0] = (((uint32_t)data[3] << 24)
|
||||||
|
| ((uint32_t)data[2] << 16)
|
||||||
|
| ((uint32_t)data[1] << 8)
|
||||||
|
| ((uint32_t)data[0] << 0));
|
||||||
|
txfifo->data[1] = (((uint32_t)data[7] << 24)
|
||||||
|
| ((uint32_t)data[6] << 16)
|
||||||
|
| ((uint32_t)data[5] << 8)
|
||||||
|
| ((uint32_t)data[4] << 0));
|
||||||
|
}
|
||||||
|
SOC_CAN->TXBAR = ((uint32_t)1 << w_index);
|
||||||
|
return len;
|
||||||
|
}
|
||||||
|
|
||||||
|
void can_filter(uint32_t id, uint8_t index)
|
||||||
|
{
|
||||||
|
MSG_RAM.FLS[index] = ((0x2 << 30) // Classic filter
|
||||||
|
| (0x1 << 27) // Store in Rx FIFO 0 if filter matches
|
||||||
|
| (id << 16)
|
||||||
|
| 0x7FF); // mask all enabled
|
||||||
|
}
|
||||||
|
|
||||||
|
// Setup the receive packet filter
|
||||||
|
void
|
||||||
|
canbus_set_filter(uint32_t id)
|
||||||
|
{
|
||||||
|
/* Request initialisation */
|
||||||
|
SOC_CAN->CCCR |= FDCAN_CCCR_INIT;
|
||||||
|
/* Wait the acknowledge */
|
||||||
|
while (!(SOC_CAN->CCCR & FDCAN_CCCR_INIT))
|
||||||
|
;
|
||||||
|
/* Enable configuration change */
|
||||||
|
SOC_CAN->CCCR |= FDCAN_CCCR_CCE;
|
||||||
|
|
||||||
|
can_filter(CANBUS_ID_ADMIN, 0);
|
||||||
|
|
||||||
|
/* List size standard */
|
||||||
|
SOC_CAN->RXGFC &= ~(FDCAN_RXGFC_LSS);
|
||||||
|
SOC_CAN->RXGFC |= 1 << FDCAN_RXGFC_LSS_Pos;
|
||||||
|
|
||||||
|
/* Filter remote frames with 11-bit standard IDs
|
||||||
|
Non-matching frames standard reject or accept in Rx FIFO 1 */
|
||||||
|
SOC_CAN->RXGFC &= ~(FDCAN_RXGFC_RRFS | FDCAN_RXGFC_ANFS);
|
||||||
|
SOC_CAN->RXGFC |= ((0 << FDCAN_RXGFC_RRFS_Pos)
|
||||||
|
| ((id ? 0x01 : 0x02) << FDCAN_RXGFC_ANFS_Pos));
|
||||||
|
|
||||||
|
/* Leave the initialisation mode for the filter */
|
||||||
|
SOC_CAN->CCCR &= ~FDCAN_CCCR_CCE;
|
||||||
|
SOC_CAN->CCCR &= ~FDCAN_CCCR_INIT;
|
||||||
|
}
|
||||||
|
|
||||||
|
// This function handles CAN global interrupts
|
||||||
|
void
|
||||||
|
CAN_IRQHandler(void)
|
||||||
|
{
|
||||||
|
uint32_t ir = SOC_CAN->IR;
|
||||||
|
uint32_t ie = SOC_CAN->IE;
|
||||||
|
|
||||||
|
if (ir & FDCAN_IE_RX_FIFO1 && ie & FDCAN_IE_RX_FIFO1) {
|
||||||
|
SOC_CAN->IR = FDCAN_IE_RX_FIFO1;
|
||||||
|
|
||||||
|
if (SOC_CAN->RXF1S & FDCAN_RXF1S_F1FL) {
|
||||||
|
// Read and ack data packet
|
||||||
|
uint32_t r_index = ((SOC_CAN->RXF1S & FDCAN_RXF1S_F1GI)
|
||||||
|
>> FDCAN_RXF1S_F1GI_Pos);
|
||||||
|
FDCAN_RX_FIFO_TypeDef *rxf1 = &MSG_RAM.RXF1[r_index];
|
||||||
|
|
||||||
|
uint32_t rir_id = rxf1->ID;
|
||||||
|
uint32_t dlc = rxf1->DLC;
|
||||||
|
uint8_t data[8];
|
||||||
|
for (uint8_t i = 0; i < dlc; i++) {
|
||||||
|
data[i] = rxf1->data[i];
|
||||||
|
}
|
||||||
|
SOC_CAN->RXF1A = r_index;
|
||||||
|
|
||||||
|
// Process packet
|
||||||
|
canbus_process_data(rir_id, dlc, data);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (ie & FDCAN_IE_RX_FIFO0 && ir & FDCAN_IE_RX_FIFO0) {
|
||||||
|
// Admin Rx
|
||||||
|
SOC_CAN->IR = FDCAN_IE_RX_FIFO0;
|
||||||
|
canbus_notify_rx();
|
||||||
|
}
|
||||||
|
if (ie & FDCAN_IE_TC && ir & FDCAN_IE_TC) {
|
||||||
|
// Tx
|
||||||
|
SOC_CAN->IR = FDCAN_IE_TC;
|
||||||
|
canbus_notify_tx();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline const uint32_t
|
||||||
|
make_btr(uint32_t sjw, // Sync jump width, ... hmm
|
||||||
|
uint32_t time_seg1, // time segment before sample point, 1 .. 16
|
||||||
|
uint32_t time_seg2, // time segment after sample point, 1 .. 8
|
||||||
|
uint32_t brp) // Baud rate prescaler, 1 .. 1024
|
||||||
|
{
|
||||||
|
return (((uint32_t)(sjw-1)) << FDCAN_NBTP_NSJW_Pos
|
||||||
|
| ((uint32_t)(time_seg1-1)) << FDCAN_NBTP_NTSEG1_Pos
|
||||||
|
| ((uint32_t)(time_seg2-1)) << FDCAN_NBTP_NTSEG2_Pos
|
||||||
|
| ((uint32_t)(brp - 1)) << FDCAN_NBTP_NBRP_Pos);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline const uint32_t
|
||||||
|
compute_btr(uint32_t pclock, uint32_t bitrate)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
Some equations:
|
||||||
|
Tpclock = 1 / pclock
|
||||||
|
Tq = brp * Tpclock
|
||||||
|
Tbs1 = Tq * TS1
|
||||||
|
Tbs2 = Tq * TS2
|
||||||
|
NominalBitTime = Tq + Tbs1 + Tbs2
|
||||||
|
BaudRate = 1/NominalBitTime
|
||||||
|
Bit value sample point is after Tq+Tbs1. Ideal sample point
|
||||||
|
is at 87.5% of NominalBitTime
|
||||||
|
Use the lowest brp where ts1 and ts2 are in valid range
|
||||||
|
*/
|
||||||
|
|
||||||
|
uint32_t bit_clocks = pclock / bitrate; // clock ticks per bit
|
||||||
|
|
||||||
|
uint32_t sjw = 2;
|
||||||
|
uint32_t qs;
|
||||||
|
// Find number of time quantas that gives us the exact wanted bit time
|
||||||
|
for (qs = 18; qs > 9; qs--) {
|
||||||
|
// check that bit_clocks / quantas is an integer
|
||||||
|
uint32_t brp_rem = bit_clocks % qs;
|
||||||
|
if (brp_rem == 0)
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
uint32_t brp = bit_clocks / qs;
|
||||||
|
uint32_t time_seg2 = qs / 8; // sample at ~87.5%
|
||||||
|
uint32_t time_seg1 = qs - (1 + time_seg2);
|
||||||
|
|
||||||
|
return make_btr(sjw, time_seg1, time_seg2, brp);
|
||||||
|
}
|
||||||
|
|
||||||
|
void
|
||||||
|
can_init(void)
|
||||||
|
{
|
||||||
|
enable_pclock((uint32_t)SOC_CAN);
|
||||||
|
|
||||||
|
gpio_peripheral(GPIO_Rx, CAN_FUNCTION, 1);
|
||||||
|
gpio_peripheral(GPIO_Tx, CAN_FUNCTION, 0);
|
||||||
|
|
||||||
|
uint32_t pclock = get_pclock_frequency((uint32_t)SOC_CAN);
|
||||||
|
|
||||||
|
uint32_t btr = compute_btr(pclock, CONFIG_CANBUS_FREQUENCY);
|
||||||
|
|
||||||
|
/*##-1- Configure the CAN #######################################*/
|
||||||
|
|
||||||
|
/* Exit from sleep mode */
|
||||||
|
SOC_CAN->CCCR &= ~FDCAN_CCCR_CSR;
|
||||||
|
/* Wait the acknowledge */
|
||||||
|
while (SOC_CAN->CCCR & FDCAN_CCCR_CSA)
|
||||||
|
;
|
||||||
|
/* Request initialisation */
|
||||||
|
SOC_CAN->CCCR |= FDCAN_CCCR_INIT;
|
||||||
|
/* Wait the acknowledge */
|
||||||
|
while (!(SOC_CAN->CCCR & FDCAN_CCCR_INIT))
|
||||||
|
;
|
||||||
|
/* Enable configuration change */
|
||||||
|
SOC_CAN->CCCR |= FDCAN_CCCR_CCE;
|
||||||
|
|
||||||
|
if (SOC_CAN == FDCAN1)
|
||||||
|
FDCAN_CONFIG->CKDIV = 0;
|
||||||
|
|
||||||
|
/* Disable automatic retransmission */
|
||||||
|
SOC_CAN->CCCR |= FDCAN_CCCR_DAR;
|
||||||
|
/* Disable protocol exception handling */
|
||||||
|
SOC_CAN->CCCR |= FDCAN_CCCR_PXHD;
|
||||||
|
|
||||||
|
SOC_CAN->NBTP = btr;
|
||||||
|
|
||||||
|
/* Leave the initialisation mode */
|
||||||
|
SOC_CAN->CCCR &= ~FDCAN_CCCR_CCE;
|
||||||
|
SOC_CAN->CCCR &= ~FDCAN_CCCR_INIT;
|
||||||
|
|
||||||
|
/*##-2- Configure the CAN Filter #######################################*/
|
||||||
|
canbus_set_filter(0);
|
||||||
|
|
||||||
|
/*##-3- Configure Interrupts #################################*/
|
||||||
|
armcm_enable_irq(CAN_IRQHandler, CAN_IT0_IRQn, 0);
|
||||||
|
if (CAN_IT0_IRQn != CAN_IT1_IRQn)
|
||||||
|
armcm_enable_irq(CAN_IRQHandler, CAN_IT1_IRQn, 0);
|
||||||
|
SOC_CAN->ILE |= 0x03;
|
||||||
|
SOC_CAN->IE |= FDCAN_IE_RX_FIFO0 | FDCAN_IE_RX_FIFO1;
|
||||||
|
|
||||||
|
// Convert unique 96-bit chip id into 48 bit representation
|
||||||
|
uint64_t hash = fasthash64((uint8_t*)UID_BASE, 12, 0xA16231A7);
|
||||||
|
canbus_set_uuid(&hash);
|
||||||
|
}
|
||||||
|
DECL_INIT(can_init);
|
||||||
|
|
@ -30,6 +30,8 @@ lookup_clock_line(uint32_t periph_base)
|
||||||
uint32_t bit = 1 << ((periph_base - AHBPERIPH_BASE) / 0x400);
|
uint32_t bit = 1 << ((periph_base - AHBPERIPH_BASE) / 0x400);
|
||||||
return (struct cline){.en=&RCC->AHBENR, .rst=&RCC->AHBRSTR, .bit=bit};
|
return (struct cline){.en=&RCC->AHBENR, .rst=&RCC->AHBRSTR, .bit=bit};
|
||||||
}
|
}
|
||||||
|
if ((periph_base == FDCAN1_BASE) || (periph_base == FDCAN2_BASE))
|
||||||
|
return (struct cline){.en=&RCC->APBENR1,.rst=&RCC->APBRSTR1,.bit=1<<12};
|
||||||
if (periph_base == USB_BASE)
|
if (periph_base == USB_BASE)
|
||||||
return (struct cline){.en=&RCC->APBENR1,.rst=&RCC->APBRSTR1,.bit=1<<13};
|
return (struct cline){.en=&RCC->APBENR1,.rst=&RCC->APBRSTR1,.bit=1<<13};
|
||||||
if (periph_base == CRS_BASE)
|
if (periph_base == CRS_BASE)
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue