3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Fix typo in Measuring_Resonances.md 

Reported by @fredrikbaberg.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-09-02 12:42:32 -04:00
parent 830c80a88a
commit 1feea0cfe8
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/Measuring_Resonances.md
View File

@ -7,7 +7,7 @@ Note that using ADXL345 requires some soldering and crimping. ADXL345 can be
connected to a Raspberry Pi directly, or to an SPI interface of an MCU connected to a Raspberry Pi directly, or to an SPI interface of an MCU
board (it needs to be reasonably fast). board (it needs to be reasonably fast).
When sourcing ADLX345, be aware that there is a variety of different PCB When sourcing ADXL345, be aware that there is a variety of different PCB
board designs and different clones of them. Make sure that the board supports board designs and different clones of them. Make sure that the board supports
SPI mode (small number of boards appear to be hard-configured for I2C by SPI mode (small number of boards appear to be hard-configured for I2C by
pulling SDO to GND), and, if it is going to be connected to a 5V printer MCU, pulling SDO to GND), and, if it is going to be connected to a 5V printer MCU,