From 1feea0cfe8310b7633c27da9c45cc6422014a78b Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Thu, 2 Sep 2021 12:42:32 -0400 Subject: [PATCH] docs: Fix typo in Measuring_Resonances.md Reported by @fredrikbaberg. Signed-off-by: Kevin O'Connor --- docs/Measuring_Resonances.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/Measuring_Resonances.md b/docs/Measuring_Resonances.md index f9272ed3..1487cda5 100644 --- a/docs/Measuring_Resonances.md +++ b/docs/Measuring_Resonances.md @@ -7,7 +7,7 @@ Note that using ADXL345 requires some soldering and crimping. ADXL345 can be connected to a Raspberry Pi directly, or to an SPI interface of an MCU board (it needs to be reasonably fast). -When sourcing ADLX345, be aware that there is a variety of different PCB +When sourcing ADXL345, be aware that there is a variety of different PCB board designs and different clones of them. Make sure that the board supports SPI mode (small number of boards appear to be hard-configured for I2C by pulling SDO to GND), and, if it is going to be connected to a 5V printer MCU,