3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Minor formatting change to example.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-07-16 12:59:17 -04:00
parent 53092a6474
commit 1c508c38aa
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
config/example.cfg
View File

@ -259,8 +259,8 @@ pin: ar9
# different than the requested cycle_time. The default is False.
#kick_start_time: 0.100
# Time (in seconds) to run the fan at full speed when either first
# enabling or increasing it by more than 50% (helps get the fan spinning).
# The default is 0.100 seconds.
# enabling or increasing it by more than 50% (helps get the fan
# spinning). The default is 0.100 seconds.
#off_below: 0.0
# The minimum input speed which will power the fan (expressed as a
# value from 0.0 to 1.0). When a speed lower than off_below is
@ -318,8 +318,8 @@ max_accel: 3000
max_z_velocity: 25
# For cartesian printers this sets the maximum velocity (in mm/s) of
# movement along the z axis. This setting can be used to restrict
# the maximum speed of the z stepper motor on cartesian
# printers. The default is to use max_velocity for max_z_velocity.
# the maximum speed of the z stepper motor on cartesian printers.
# The default is to use max_velocity for max_z_velocity.
max_z_accel: 30
# For cartesian printers this sets the maximum acceleration (in
# mm/s^2) of movement along the z axis. It limits the acceleration