3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Improve the description of z_tilt z_positions 

Reported by @sensille.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-03-10 12:24:34 -04:00
parent f145439267
commit 19c7955f2a
1 changed files with 6 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
config/example-extras.cfg
View File

@ -313,9 +313,12 @@
#[z_tilt] #[z_tilt]
#z_positions: #z_positions:
# A list of X,Y coordinates (one per line; subsequent lines # A list of X,Y coordinates (one per line; subsequent lines
# indented) describing the location of each Z stepper. The first # indented) describing the location of each bed "pivot point". The
# entry corresponds to stepper_z, the second to stepper_z1, the # "pivot point" is the point where the bed attaches to the given Z
# third to stepper_z2, etc. This parameter must be provided. # stepper. It is described using nozzle coordinates (the XY position
# of the nozzle if it could move directly above the point). The
# first entry corresponds to stepper_z, the second to stepper_z1,
# the third to stepper_z2, etc. This parameter must be provided.
#points: #points:
# A list of X,Y coordinates (one per line; subsequent lines # A list of X,Y coordinates (one per line; subsequent lines
# indented) that should be probed during a Z_TILT_ADJUST command. # indented) that should be probed during a Z_TILT_ADJUST command.