From 197030c6844a6c797e0623af3338beb97a25bd68 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 22 Jul 2019 10:07:34 -0400 Subject: [PATCH] docs: Update FAQ to reference Bootloaders.md on "make flash" failure Signed-off-by: Kevin O'Connor --- docs/FAQ.md | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/docs/FAQ.md b/docs/FAQ.md index cf729cb2..56490520 100644 --- a/docs/FAQ.md +++ b/docs/FAQ.md @@ -102,10 +102,9 @@ will need to manually flash. See if there is a config file in the [config directory](https://github.com/KevinOConnor/klipper/tree/master/config) with specific instructions for flashing the device. Also, check the board manufacturer's documentation to see if it describes how to flash -the device. Finally, on AVR devices, it may be possible to manually -flash the device using [avrdude](http://www.nongnu.org/avrdude/) with -custom command-line parameters - see the avrdude documentation for -further information. +the device. Finally, it may be possible to manually flash the device +using tools such as "avrdude" or "bossac" - see the +[bootloader document](Bootloaders.md) for additional information. ### How do I change the serial baud rate?