3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

gcode: Ignore M21 command 

No need to recommend users disable "SD card support" in octoprint -
instead, just ignore the M21 command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2017-04-20 10:11:10 -04:00
parent 4b1a530330
commit 167b18b58f
2 changed files with 8 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
docs/Installation.md
View File

@ -120,9 +120,6 @@ Enter the Settings tab again and under "Serial Connection" change the
and may be safely left at 250000). Unselect the "Not only cancel
ongoing prints but also disconnect..." checkbox.
Under the "Features" tab, unselect "Enable SD support". Then click
"Save".
Running the host software
=========================

18
klippy/gcode.py
View File

@ -44,10 +44,10 @@ class GCodeParser:
self.heater_bed = self.printer.objects.get('heater_bed')
self.fan = self.printer.objects.get('fan')
# Map command handlers
handlers = ['G1', 'G4', 'G20', 'G21', 'G28', 'G90', 'G91', 'G92',
'M18', 'M82', 'M83', 'M105', 'M110', 'M112', 'M114', 'M115',
handlers = ['G1', 'G4', 'G20', 'G28', 'G90', 'G91', 'G92',
'M18', 'M82', 'M83', 'M105', 'M112', 'M114', 'M115',
'M206', 'M400',
'HELP', 'QUERY_ENDSTOPS',
'HELP', 'IGNORE', 'QUERY_ENDSTOPS',
'RESTART', 'FIRMWARE_RESTART', 'STATUS']
if self.heater_nozzle is not None:
handlers.extend(['M104', 'M109', 'PID_TUNE'])
@ -266,9 +266,6 @@ class GCodeParser:
def cmd_G20(self, params):
# Set units to inches
self.respond_error('Machine does not support G20 (inches) command')
def cmd_G21(self, params):
# Set units to millimeters
pass
def cmd_G28(self, params):
# Move to origin
axes = []
@ -324,10 +321,6 @@ class GCodeParser:
def cmd_M109(self, params):
# Set Extruder Temperature and Wait
self.set_temp(self.heater_nozzle, params, wait=True)
cmd_M110_when_not_ready = True
def cmd_M110(self, params):
# Set Current Line Number
pass
def cmd_M112(self, params):
# Emergency Stop
self.toolhead.force_shutdown()
@ -372,6 +365,11 @@ class GCodeParser:
def cmd_M400(self, params):
# Wait for current moves to finish
self.toolhead.wait_moves()
cmd_IGNORE_when_not_ready = True
cmd_IGNORE_aliases = ["G21", "M110", "M21"]
def cmd_IGNORE(self, params):
# Commands that are just silently accepted
pass
cmd_QUERY_ENDSTOPS_help = "Report on the status of each endstop"
cmd_QUERY_ENDSTOPS_aliases = ["M119"]
def cmd_QUERY_ENDSTOPS(self, params):