From 161cde4c5c00c720aa28261765919896b2c23ca1 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Fri, 8 Feb 2019 12:20:16 -0500 Subject: [PATCH] config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds Marlin examples use the "ATC Semitec 104GT-2" thermistor for the CR10, CR10S, and CR10mini. Reported by @dovcharov. Signed-off-by: Kevin O'Connor --- config/printer-creality-cr10-2017.cfg | 2 +- config/printer-creality-cr10mini-2017.cfg | 2 +- config/printer-creality-cr10s-2017.cfg | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/config/printer-creality-cr10-2017.cfg b/config/printer-creality-cr10-2017.cfg index 257efa4b..f4f6e9df 100644 --- a/config/printer-creality-cr10-2017.cfg +++ b/config/printer-creality-cr10-2017.cfg @@ -59,7 +59,7 @@ max_temp: 250 [heater_bed] heater_pin: PD4 -sensor_type: EPCOS 100K B57560G104F +sensor_type: ATC Semitec 104GT-2 sensor_pin: PA6 control: pid pid_Kp: 426.68 diff --git a/config/printer-creality-cr10mini-2017.cfg b/config/printer-creality-cr10mini-2017.cfg index 2e134808..19d68676 100644 --- a/config/printer-creality-cr10mini-2017.cfg +++ b/config/printer-creality-cr10mini-2017.cfg @@ -59,7 +59,7 @@ max_temp: 250 [heater_bed] heater_pin: PD4 -sensor_type: EPCOS 100K B57560G104F +sensor_type: ATC Semitec 104GT-2 sensor_pin: PA6 control: pid pid_Kp: 426.68 diff --git a/config/printer-creality-cr10s-2017.cfg b/config/printer-creality-cr10s-2017.cfg index 8c886bf0..10f97367 100644 --- a/config/printer-creality-cr10s-2017.cfg +++ b/config/printer-creality-cr10s-2017.cfg @@ -51,7 +51,7 @@ max_temp: 250 [heater_bed] heater_pin: ar8 -sensor_type: EPCOS 100K B57560G104F +sensor_type: ATC Semitec 104GT-2 sensor_pin: analog14 control: pid pid_Kp: 690.34