3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mcu: Minor whitespace changes 

Wrap lines at 80 columns.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-07-26 10:54:31 -04:00
parent 98580ac1c2
commit 13ccb1a46f
1 changed files with 14 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
klippy/mcu.py
View File

@ -75,7 +75,8 @@ class MCU_stepper:
def set_position(self, newpos):
spos = self.calc_position_from_coord(newpos)
self._mcu_position_offset += self.get_commanded_position() - spos
self._ffi_lib.itersolve_set_commanded_pos(self._stepper_kinematics, spos)
self._ffi_lib.itersolve_set_commanded_pos(
self._stepper_kinematics, spos)
def get_commanded_position(self):
return self._ffi_lib.itersolve_get_commanded_pos(
self._stepper_kinematics)
@ -205,7 +206,8 @@ class MCU_endstop:
s.note_homing_end(did_trigger=True)
self._homing = False
return False
last_sent_print_time = self._mcu.estimated_print_time(last_sent_time)
last_sent_print_time = self._mcu.estimated_print_time(
last_sent_time)
if last_sent_print_time > home_end_time:
# Timeout - disable endstop checking
for s in self._steppers:
@ -531,7 +533,8 @@ class MCU:
self.add_config_cmd("finalize_config crc=%d" % (config_crc,))
# Transmit config messages (if needed)
if prev_crc is None:
logging.info("Sending MCU '%s' printer configuration...", self._name)
logging.info("Sending MCU '%s' printer configuration...",
self._name)
for c in self._config_cmds:
self._serial.send(c)
elif config_crc != prev_crc:
@ -566,7 +569,8 @@ class MCU:
else:
start_reason = self._printer.get_start_args().get("start_reason")
if start_reason == 'firmware_restart':
raise error("Failed automated reset of MCU '%s'" % (self._name,))
raise error("Failed automated reset of MCU '%s'" % (
self._name,))
# Already configured - send init commands
self._send_config(config_params['crc'])
# Setup steppersync with the move_count returned by get_config
@ -583,7 +587,8 @@ class MCU:
self._steppersync = self._ffi_lib.steppersync_alloc(
self._serial.serialqueue, self._stepqueues, len(self._stepqueues),
move_count)
self._ffi_lib.steppersync_set_time(self._steppersync, 0., self._mcu_freq)
self._ffi_lib.steppersync_set_time(
self._steppersync, 0., self._mcu_freq)
def _connect(self):
if self.is_fileoutput():
self._connect_file()
@ -675,7 +680,8 @@ class MCU:
self._ffi_lib.steppersync_free(self._steppersync)
self._steppersync = None
def _shutdown(self, force=False):
if self._emergency_stop_cmd is None or (self._is_shutdown and not force):
if (self._emergency_stop_cmd is None
or (self._is_shutdown and not force)):
return
self._emergency_stop_cmd.send()
def _restart_arduino(self):
@ -685,7 +691,8 @@ class MCU:
def _restart_via_command(self):
if ((self._reset_cmd is None and self._config_reset_cmd is None)
or not self._clocksync.is_active()):
logging.info("Unable to issue reset command on MCU '%s'", self._name)
logging.info("Unable to issue reset command on MCU '%s'",
self._name)
return
if self._reset_cmd is None:
# Attempt reset via config_reset command