3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Minor Eryone Thinker S config fixes. (#4695) 

Fixing initial rotation distance on Thinker S stocker extruder
Removing author information
Fixing Z Axis homing speed as it was too fast.

Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
This commit is contained in:
Demetrius Apostolopoulos 2021-09-21 11:12:58 -07:00 committed by GitHub
parent f2766dbed3
commit 0b918b357c
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
config/printer-eryone-thinker-series-v2-2020.cfg
View File

@ -1,9 +1,6 @@
# This file contains pin mappings for the Eryone Thinker Series V2.
# To use this config, the firmware should be compiled for the AVR atmega2560.
# Author: dapostol73
# Thanks to 3D.Subzwari and MAD3D for the help!
# Extra settings to support BL Touch, Filament Runout sensor, TMC2209 and
# have setting for fixing GCode errors, these configus can be found on
# Eryone's Facebook Group under files.
@ -43,7 +40,7 @@ enable_pin: !PA5
microsteps: 16
rotation_distance: 8
position_max: 400
homing_speed: 25
homing_speed: 5
endstop_pin: !PB4
position_endstop: 0
@ -52,7 +49,8 @@ step_pin: PC3
dir_pin: !PL6
enable_pin: !PA4
microsteps: 16
rotation_distance: 32
# Stock extruder [200 steps/rot]*[16 steps]/[93 steps/mm]
rotation_distance: 34.4
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PH6