3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Minor wording change in Pressure_Advance.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-11-25 11:48:41 -05:00
parent 3aad25eab9
commit 0b0e5a911e
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/Pressure_Advance.md
View File

@ -102,7 +102,7 @@ Important Notes
by using a high printing speed (eg, 100mm/s) and a coarse layer by using a high printing speed (eg, 100mm/s) and a coarse layer
height (typically around 75% of the nozzle diameter). Other slicer height (typically around 75% of the nozzle diameter). Other slicer
settings should be similar to their defaults (eg, perimeters of 2 or settings should be similar to their defaults (eg, perimeters of 2 or
3 layers, normal retraction amount). It can be useful to set the 3 lines, normal retraction amount). It can be useful to set the
external perimeter speed to be the same speed as the rest of the external perimeter speed to be the same speed as the rest of the
print, but it is not a requirement. print, but it is not a requirement.