From 0b0e5a911eb398482b9d73043fe82b5db99affe9 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 25 Nov 2019 11:48:41 -0500 Subject: [PATCH] docs: Minor wording change in Pressure_Advance.md Signed-off-by: Kevin O'Connor --- docs/Pressure_Advance.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/Pressure_Advance.md b/docs/Pressure_Advance.md index db7bf668..d16364fb 100644 --- a/docs/Pressure_Advance.md +++ b/docs/Pressure_Advance.md @@ -102,7 +102,7 @@ Important Notes by using a high printing speed (eg, 100mm/s) and a coarse layer height (typically around 75% of the nozzle diameter). Other slicer settings should be similar to their defaults (eg, perimeters of 2 or - 3 layers, normal retraction amount). It can be useful to set the + 3 lines, normal retraction amount). It can be useful to set the external perimeter speed to be the same speed as the rest of the print, but it is not a requirement.