diff --git a/config/example-extras.cfg b/config/example-extras.cfg
index 2297142b..36e6beb7 100644
--- a/config/example-extras.cfg
+++ b/config/example-extras.cfg
@@ -1663,14 +1663,9 @@
 #   The pins connected to an uc1701 type lcd. The rst_pin is
 #   optional. The cs_pin and a0_pin parameters must be provided when
 #   using an uc1701 display.
-#rs_pin:
-#cs_pin:
-#a0_pin:
-#   The pins connected to an st7567 type lcd. These parameters must be
-#   provided when using an st7567 display.
-#contrast:
-#   The contrast to set when using a uc1701/st7567 type displays.  The value
-#   may range from 0 to 63. Default is 40 for uc1701 and 60 for st7567.
+#contrast: 40
+#   The contrast to set when using a uc1701 type display.  The value may
+#   range from 0 to 63.  Default is 40.
 #cs_pin:
 #dc_pin:
 #spi_bus:
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md
index fa81032b..3a432d5a 100644
--- a/docs/Config_Changes.md
+++ b/docs/Config_Changes.md
@@ -6,6 +6,11 @@ All dates in this document are approximate.
 
 # Changes
 
+20191218: The display config section no longer supports "lcd_type:
+st7567".  Use the "uc1701" display type instead - set "lcd_type:
+uc1701" and change the "rs_pin: some_pin" to "rst_pin: some_pin".  It
+may also be necessary to add a "contrast: 60" config setting.
+
 20191210: The builtin T0, T1, T2, ... commands have been removed.  The
 extruder activate_gcode and deactivate_gcode config options have been
 removed.  If these commands (and scripts) are needed then define
diff --git a/klippy/extras/display/display.py b/klippy/extras/display/display.py
index 908c89ab..c1a02725 100644
--- a/klippy/extras/display/display.py
+++ b/klippy/extras/display/display.py
@@ -11,8 +11,7 @@ import menu
 
 LCD_chips = {
     'st7920': st7920.ST7920, 'hd44780': hd44780.HD44780,
-    'uc1701': uc1701.UC1701, 'ssd1306': uc1701.SSD1306,
-    'st7567': uc1701.ST7567, 'sh1106': uc1701.SH1106,
+    'uc1701': uc1701.UC1701, 'ssd1306': uc1701.SSD1306, 'sh1106': uc1701.SH1106,
 }
 M73_TIMEOUT = 5.
 
diff --git a/klippy/extras/display/uc1701.py b/klippy/extras/display/uc1701.py
index da932884..f19d9f97 100644
--- a/klippy/extras/display/uc1701.py
+++ b/klippy/extras/display/uc1701.py
@@ -2,7 +2,6 @@
 #
 # Copyright (C) 2018-2019  Kevin O'Connor <kevin@koconnor.net>
 # Copyright (C) 2018  Eric Callahan  <arksine.code@gmail.com>
-# Copyright (C) 2019  Dmitry Budaev <condemil@gmail.com>
 #
 # This file may be distributed under the terms of the GNU GPLv3 license.
 import logging
@@ -187,39 +186,6 @@ class UC1701(DisplayBase):
         self.send([0xA4]) # normal display
         self.flush()
 
-# The ST7567 is a "4-wire" SPI display device
-class ST7567(DisplayBase):
-    def __init__(self, config):
-        DisplayBase.__init__(self, SPI4wire(config, "a0_pin"))
-        self.contrast = config.getint('contrast', 60, minval=0, maxval=63)
-        ppins = config.get_printer().lookup_object('pins')
-        rs_pin = config.get('rs_pin')
-        self.reset_pin = ppins.setup_pin('digital_out', rs_pin)
-        self.reset_pin.setup_start_value(start_value=1., shutdown_value=0.,
-                                         is_static=False)
-    def init(self):
-        # Send init commands
-        init_cmds = [0xE2, # System reset
-                     0x40, # Set display to start at line 0
-                     0xA0, # Set SEG direction
-                     0xC8, # Set COM Direction
-                     0xA2, # Set Bias = 1/9
-                     0x2F, # Boost, regulator, follower on
-                     0xF8, # Set booster ratio
-                     0x00, # Booster ratio value (4x)
-                     0x23, # Set regulation ratio (3)
-                     0x81, # Set Electronic Volume
-                     self.contrast, # Electronic Volume value
-                     # 0xAC, # Set static indicator off
-                     # 0x00, # NOP
-                     0xA6, # Disable Inverse
-                     0xAF] # Set display enable
-        self.send(init_cmds)
-        self.send([0xA5]) # display all
-        self.send([0xA4]) # normal display
-        self.flush()
-        logging.info("st7567 initialized")
-
 # The SSD1306 supports both i2c and "4-wire" spi
 class SSD1306(DisplayBase):
     def __init__(self, config, columns=128):