From 07e8011f51667c2b61676b2c77a510569cbf1ec6 Mon Sep 17 00:00:00 2001 From: Hywelmartin <33714214+Hywelmartin@users.noreply.github.com> Date: Sat, 2 May 2020 15:31:23 +0200 Subject: [PATCH] config: Update printer-anycubic-kossel-plus-2017.cfg (#2775) horizontal_move_z: 20 instead of 5... there has been some support Q about this.. Signed-off-by: Martin Malmqvist --- config/printer-anycubic-kossel-plus-2017.cfg | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/config/printer-anycubic-kossel-plus-2017.cfg b/config/printer-anycubic-kossel-plus-2017.cfg index ff20c69e..b2889b42 100644 --- a/config/printer-anycubic-kossel-plus-2017.cfg +++ b/config/printer-anycubic-kossel-plus-2017.cfg @@ -4,8 +4,8 @@ # The Anycubic delta printers use the TriGorilla board which is an # AVR ATmega2560 Arduino + RAMPS compatible board. # To use this config, the firmware should be compiled for the AVR atmega2560. - -# See the example.cfg file for a description of available parameters. +# See the example.cfg, example-delta.cfg and example-extras.cfg files +# for a description of available parameters. [stepper_a] step_pin: ar54 @@ -95,6 +95,8 @@ timeout: 360 [delta_calibrate] radius: 115 +# If the original probe is used +#horizontal_move_z: 20 # "RepRapDiscount 2004 Smart Controller" type displays [display]