3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Improve wording of screws_tilt_adjust in Config_Reference.md 

Reported by @JamesH1978.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2022-04-23 21:22:02 -04:00
parent a10b2805de
commit 07a90902a5
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
docs/Config_Reference.md
View File

@ -999,10 +999,10 @@ information.
[screws_tilt_adjust] [screws_tilt_adjust]
#screw1: #screw1:
# The (X, Y) coordinate of the first bed leveling screw. This is a # The (X, Y) coordinate of the first bed leveling screw. This is a
# position to command the nozzle to that is directly above the bed # position to command the nozzle to so that the probe is directly
# screw (or as close as possible while still being above the bed). # above the bed screw (or as close as possible while still being
# This is the base screw used in calculations. This parameter must # above the bed). This is the base screw used in calculations. This
# be provided. # parameter must be provided.
#screw1_name: #screw1_name:
# An arbitrary name for the given screw. This name is displayed when # An arbitrary name for the given screw. This name is displayed when
# the helper script runs. The default is to use a name based upon # the helper script runs. The default is to use a name based upon