3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update sensorless homing documentation to disable second home 

Signed-off-by: Frank Kang <amblidex@outlook.com>
This commit is contained in:
Frank Kang 2019-03-10 13:52:55 -06:00 committed by KevinOConnor
parent 746a378c18
commit 06c0463d44
1 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Sensorless_Homing.md
View File

@ -50,9 +50,11 @@ By configuring the `diag1_pin`, Klipper allows you to use a special virtual end
... ...
endstop_pin: tmc2130_stepper_x:virtual_endstop # use the virtual end stop generated by the [tmc2130 stepper_x] section of this config file endstop_pin: tmc2130_stepper_x:virtual_endstop # use the virtual end stop generated by the [tmc2130 stepper_x] section of this config file
... ...
homing_retract_dist: 0
...
``` ```
The name of the virtual end stop pin is derived from the name of the TMC2130 section. The name of the virtual end stop pin is derived from the name of the TMC2130 section. The `homing_retract_dist` setting should be set to zero to disable the second homing move as a second pass is not needed, and attempts to do so are error prone.
ATTENTION: This guide only mentions the mandatory parameters and the ones needed to set up sensorless homing. There are many other options to configure on a TMC2130, make sure to take a look at `config/example-extras.cfg` for all the available options. ATTENTION: This guide only mentions the mandatory parameters and the ones needed to set up sensorless homing. There are many other options to configure on a TMC2130, make sure to take a look at `config/example-extras.cfg` for all the available options.