3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update Debugging.md file with python virtual env setup 

Direct readers to the main Installation file to setup the python
virtual environment and remove the outdated instructions in the
Debugging file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2017-04-11 12:49:12 -04:00
parent 70e53cb080
commit 050008f3c8
1 changed files with 3 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Debugging.md
View File

@ -82,17 +82,11 @@ compile Klipper (run `make`) and then start the simulation with:
PYTHONPATH=/path/to/simulavr/src/python/ ./scripts/avrsim.py -m atmega644 -s 20000000 -b 250000 out/klipper.elf
```
It may be necessary to create a python virtual environment to run
Klippy on the target machine. To do so, run:
```
virtualenv ~/klippy-env
~/klippy-env/bin/pip install cffi==1.6.0 pyserial==2.7
```
Then, with simulavr running in another window, one can run the
following to read gcode from a file (eg, "test.gcode"), process it
with Klippy, and send it to Klipper running in simulavr:
with Klippy, and send it to Klipper running in simulavr (see
[installation](Installation.md) for the steps necessary to build the
python virtual environment):
```
~/klippy-env/bin/python ./klippy/klippy.py config/avrsim.cfg -i test.gcode -v