From 04a12ec9bd733d424b4adc3a3583e034196d918f Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 22 Oct 2018 13:22:58 -0400 Subject: [PATCH] docs: Update stm32f1.md - usb is now supported. Signed-off-by: Kevin O'Connor --- docs/stm32f1.md | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/docs/stm32f1.md b/docs/stm32f1.md index e65113fd..8472bd49 100644 --- a/docs/stm32f1.md +++ b/docs/stm32f1.md @@ -7,11 +7,10 @@ pin mappings either. General considerations ====================== -The STM32 port currently requires an 8 MHz crystal for correct operation. The -host communication only supports a standard UART. USB serial (CDC ACM) might be -useful for some configurations, but is unimplemented. The port is currently -designed for and tested with STM32F103xB series MCUs, but it should work with -any STM32F103 series MCUs with minimal changes. +The STM32 port currently requires an 8 MHz crystal for correct +operation. The port is currently designed for and tested with +STM32F103xB series MCUs, but it should work with any STM32F103 series +MCUs with minimal changes. Unlike Arduino-based boards, typically there is no automatic reset on serial connection with STM32 boards. Please use `restart_method: command` with the