config: Update description of z_hop in safe_z_home

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-02-12 19:08:31 -05:00
parent b5c967acd8
commit 049d8c2a94
1 changed files with 10 additions and 8 deletions

View File

@ -315,14 +315,16 @@
#speed: 50.0
# Speed at which the toolhead is moved to the safe Z home coordinate.
# The default is 50 mm/s
#z_hop: 0.0
# Lift the Z axis prior to homing. This is applied to any homing command,
# even if it doesn't home the Z axis. If the Z axis is already homed and
# the zhop would exceed the printer limits, the zhop is ignored. If a lift
# has already been performed or the Z axis is known to be equally or higher
# than this distance, the zhop is ignored. After homing Z completed, the
# printhead is lifted to zhop, respecting the probe's z_offset.
# The default is 0.0mm.
#z_hop:
# Lift the Z axis prior to homing. This is applied to any homing
# command, even if it doesn't home the Z axis. If the Z axis is
# already homed and the current Z position is less than z_hop, then
# this will lift the head to a height of z_hop. If the Z axis is not
# already homed, then prior to any XY homing movement the Z axis
# boundary checks are disabled and the head is lifted by z_hop. If
# z_hop is specified, be sure to home the Z immediately after any XY
# home requests so that the Z boundary checks are accurate. The
# default is to not implement Z hop.
#z_hop_speed: 20.0
# Speed at which the Z axis is lifted prior to homing. The default is 20mm/s.
#move_to_previous: False