From 011b4e39e63980266342cdd6dacfdb15da8c684d Mon Sep 17 00:00:00 2001 From: "Dr. Matthew Swabey" Date: Wed, 19 Apr 2023 22:00:03 -0400 Subject: [PATCH] docs: Fix nested list in Measuring_Resonances (#6157) Signed-off-by: Matthew Swabey --- docs/Measuring_Resonances.md | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/docs/Measuring_Resonances.md b/docs/Measuring_Resonances.md index 1ab21eed..0897628f 100644 --- a/docs/Measuring_Resonances.md +++ b/docs/Measuring_Resonances.md @@ -36,16 +36,16 @@ An ethernet cable with shielded twisted pairs (cat5e or better) is recommended for signal integrity over a long distance. If you still experience signal integrity issues (SPI/I2C errors): - * Double check the wiring with a digital multimeter for: - * Correct connections when turned off (continuity) - * Correct power and ground voltages - * I2C only: - * Check the SCL and SDA lines' resistances to 3.3V are in the range of 900 - ohms to 1.8K - * For full technical details consult [chapter 7 of the I2C-bus specification - and user manual UM10204](https://www.pololu.com/file/0J435/UM10204.pdf) - for *fast-mode* - * Shorten the cable +- Double check the wiring with a digital multimeter for: + - Correct connections when turned off (continuity) + - Correct power and ground voltages +- I2C only: + - Check the SCL and SDA lines' resistances to 3.3V are in the range of 900 + ohms to 1.8K + - For full technical details consult [chapter 7 of the I2C-bus specification + and user manual UM10204](https://www.pololu.com/file/0J435/UM10204.pdf) + for *fast-mode* +- Shorten the cable Connect ethernet cable shielding only to the MCU board/Pi ground.