358 lines
13 KiB
C
358 lines
13 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f0xx_hal_cortex.c
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief CORTEX HAL module driver.
|
||
|
|
* This file provides firmware functions to manage the following
|
||
|
|
* functionalities of the CORTEX:
|
||
|
|
* + Initialization and de-initialization functions
|
||
|
|
* + Peripheral Control functions
|
||
|
|
*
|
||
|
|
* @verbatim
|
||
|
|
==============================================================================
|
||
|
|
##### How to use this driver #####
|
||
|
|
==============================================================================
|
||
|
|
|
||
|
|
[..]
|
||
|
|
*** How to configure Interrupts using CORTEX HAL driver ***
|
||
|
|
===========================================================
|
||
|
|
[..]
|
||
|
|
This section provides functions allowing to configure the NVIC interrupts (IRQ).
|
||
|
|
The Cortex-M0 exceptions are managed by CMSIS functions.
|
||
|
|
(#) Enable and Configure the priority of the selected IRQ Channels.
|
||
|
|
The priority can be 0..3.
|
||
|
|
|
||
|
|
-@- Lower priority values gives higher priority.
|
||
|
|
-@- Priority Order:
|
||
|
|
(#@) Lowest priority.
|
||
|
|
(#@) Lowest hardware priority (IRQn position).
|
||
|
|
|
||
|
|
(#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
|
||
|
|
|
||
|
|
(#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
|
||
|
|
|
||
|
|
-@- Negative value of IRQn_Type are not allowed.
|
||
|
|
|
||
|
|
|
||
|
|
[..]
|
||
|
|
*** How to configure Systick using CORTEX HAL driver ***
|
||
|
|
========================================================
|
||
|
|
[..]
|
||
|
|
Setup SysTick Timer for time base.
|
||
|
|
|
||
|
|
(+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
|
||
|
|
is a CMSIS function that:
|
||
|
|
(++) Configures the SysTick Reload register with value passed as function parameter.
|
||
|
|
(++) Configures the SysTick IRQ priority to the lowest value (0x03).
|
||
|
|
(++) Resets the SysTick Counter register.
|
||
|
|
(++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
|
||
|
|
(++) Enables the SysTick Interrupt.
|
||
|
|
(++) Starts the SysTick Counter.
|
||
|
|
|
||
|
|
(+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
|
||
|
|
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
|
||
|
|
HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined
|
||
|
|
inside the stm32f0xx_hal_cortex.h file.
|
||
|
|
|
||
|
|
(+) You can change the SysTick IRQ priority by calling the
|
||
|
|
HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
|
||
|
|
call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
|
||
|
|
|
||
|
|
(+) To adjust the SysTick time base, use the following formula:
|
||
|
|
|
||
|
|
Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
|
||
|
|
(++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
|
||
|
|
(++) Reload Value should not exceed 0xFFFFFF
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f0xx_hal.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup CORTEX CORTEX
|
||
|
|
* @brief CORTEX CORTEX HAL module driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||
|
|
|
||
|
|
/* Private typedef -----------------------------------------------------------*/
|
||
|
|
/* Private define ------------------------------------------------------------*/
|
||
|
|
/* Private macro -------------------------------------------------------------*/
|
||
|
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
/* Private function prototypes -----------------------------------------------*/
|
||
|
|
/* Exported functions ---------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
|
||
|
|
* @brief Initialization and Configuration functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
==============================================================================
|
||
|
|
##### Initialization and de-initialization functions #####
|
||
|
|
==============================================================================
|
||
|
|
[..]
|
||
|
|
This section provides the CORTEX HAL driver functions allowing to configure Interrupts
|
||
|
|
Systick functionalities
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Sets the priority of an interrupt.
|
||
|
|
* @param IRQn External interrupt number .
|
||
|
|
* This parameter can be an enumerator of IRQn_Type enumeration
|
||
|
|
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32f0xx.h file)
|
||
|
|
* @param PreemptPriority The preemption priority for the IRQn channel.
|
||
|
|
* This parameter can be a value between 0 and 3.
|
||
|
|
* A lower priority value indicates a higher priority
|
||
|
|
* @param SubPriority the subpriority level for the IRQ channel.
|
||
|
|
* with stm32f0xx devices, this parameter is a dummy value and it is ignored, because
|
||
|
|
* no subpriority supported in Cortex M0 based products.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
|
||
|
|
NVIC_SetPriority(IRQn,PreemptPriority);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enables a device specific interrupt in the NVIC interrupt controller.
|
||
|
|
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
|
||
|
|
* function should be called before.
|
||
|
|
* @param IRQn External interrupt number.
|
||
|
|
* This parameter can be an enumerator of IRQn_Type enumeration
|
||
|
|
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||
|
|
|
||
|
|
/* Enable interrupt */
|
||
|
|
NVIC_EnableIRQ(IRQn);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disables a device specific interrupt in the NVIC interrupt controller.
|
||
|
|
* @param IRQn External interrupt number.
|
||
|
|
* This parameter can be an enumerator of IRQn_Type enumeration
|
||
|
|
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||
|
|
|
||
|
|
/* Disable interrupt */
|
||
|
|
NVIC_DisableIRQ(IRQn);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initiates a system reset request to reset the MCU.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_NVIC_SystemReset(void)
|
||
|
|
{
|
||
|
|
/* System Reset */
|
||
|
|
NVIC_SystemReset();
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
||
|
|
* Counter is in free running mode to generate periodic interrupts.
|
||
|
|
* @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
|
||
|
|
* @retval status: - 0 Function succeeded.
|
||
|
|
* - 1 Function failed.
|
||
|
|
*/
|
||
|
|
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
|
||
|
|
{
|
||
|
|
return SysTick_Config(TicksNumb);
|
||
|
|
}
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
|
||
|
|
* @brief Cortex control functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
==============================================================================
|
||
|
|
##### Peripheral Control functions #####
|
||
|
|
==============================================================================
|
||
|
|
[..]
|
||
|
|
This subsection provides a set of functions allowing to control the CORTEX
|
||
|
|
(NVIC, SYSTICK) functionalities.
|
||
|
|
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Gets the priority of an interrupt.
|
||
|
|
* @param IRQn External interrupt number.
|
||
|
|
* This parameter can be an enumerator of IRQn_Type enumeration
|
||
|
|
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
/* Get priority for Cortex-M system or device specific interrupts */
|
||
|
|
return NVIC_GetPriority(IRQn);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Sets Pending bit of an external interrupt.
|
||
|
|
* @param IRQn External interrupt number
|
||
|
|
* This parameter can be an enumerator of IRQn_Type enumeration
|
||
|
|
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||
|
|
|
||
|
|
/* Set interrupt pending */
|
||
|
|
NVIC_SetPendingIRQ(IRQn);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Gets Pending Interrupt (reads the pending register in the NVIC
|
||
|
|
* and returns the pending bit for the specified interrupt).
|
||
|
|
* @param IRQn External interrupt number.
|
||
|
|
* This parameter can be an enumerator of IRQn_Type enumeration
|
||
|
|
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
|
||
|
|
* @retval status: - 0 Interrupt status is not pending.
|
||
|
|
* - 1 Interrupt status is pending.
|
||
|
|
*/
|
||
|
|
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||
|
|
|
||
|
|
/* Return 1 if pending else 0 */
|
||
|
|
return NVIC_GetPendingIRQ(IRQn);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clears the pending bit of an external interrupt.
|
||
|
|
* @param IRQn External interrupt number.
|
||
|
|
* This parameter can be an enumerator of IRQn_Type enumeration
|
||
|
|
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||
|
|
|
||
|
|
/* Clear pending interrupt */
|
||
|
|
NVIC_ClearPendingIRQ(IRQn);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Configures the SysTick clock source.
|
||
|
|
* @param CLKSource specifies the SysTick clock source.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
|
||
|
|
* @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
|
||
|
|
if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
|
||
|
|
{
|
||
|
|
SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This function handles SYSTICK interrupt request.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_SYSTICK_IRQHandler(void)
|
||
|
|
{
|
||
|
|
HAL_SYSTICK_Callback();
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief SYSTICK callback.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__weak void HAL_SYSTICK_Callback(void)
|
||
|
|
{
|
||
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
||
|
|
the HAL_SYSTICK_Callback could be implemented in the user file
|
||
|
|
*/
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|