klipper/klippy/extras/manual_stepper.py

# Support for a manual controlled stepper
#
# Copyright (C) 2019  Kevin O'Connor <kevin@koconnor.net>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import stepper, chelper
from . import force_move

ENDSTOP_SAMPLE_TIME = .000015
ENDSTOP_SAMPLE_COUNT = 4

class ManualStepper:
    def __init__(self, config):
        self.printer = config.get_printer()
        if config.get('endstop_pin', None) is not None:
            self.can_home = True
            self.rail = stepper.PrinterRail(
                config, need_position_minmax=False, default_position_endstop=0.)
            self.steppers = self.rail.get_steppers()
        else:
            self.can_home = False
            self.rail = stepper.PrinterStepper(config)
            self.steppers = [self.rail]
        self.velocity = config.getfloat('velocity', 5., above=0.)
        self.accel = config.getfloat('accel', 0., minval=0.)
        self.next_cmd_time = 0.
        # Setup iterative solver
        ffi_main, ffi_lib = chelper.get_ffi()
        self.trapq = ffi_main.gc(ffi_lib.trapq_alloc(), ffi_lib.trapq_free)
        self.trapq_append = ffi_lib.trapq_append
        self.trapq_free_moves = ffi_lib.trapq_free_moves
        self.rail.setup_itersolve('cartesian_stepper_alloc', 'x')
        self.rail.set_trapq(self.trapq)
        self.rail.set_max_jerk(9999999.9, 9999999.9)
        # Register commands
        stepper_name = config.get_name().split()[1]
        gcode = self.printer.lookup_object('gcode')
        gcode.register_mux_command('MANUAL_STEPPER', "STEPPER",
                                   stepper_name, self.cmd_MANUAL_STEPPER,
                                   desc=self.cmd_MANUAL_STEPPER_help)
    def sync_print_time(self):
        toolhead = self.printer.lookup_object('toolhead')
        print_time = toolhead.get_last_move_time()
        if self.next_cmd_time > print_time:
            toolhead.dwell(self.next_cmd_time - print_time)
        else:
            self.next_cmd_time = print_time
    def do_enable(self, enable):
        self.sync_print_time()
        stepper_enable = self.printer.lookup_object('stepper_enable')
        if enable:
            for s in self.steppers:
                se = stepper_enable.lookup_enable(s.get_name())
                se.motor_enable(self.next_cmd_time)
        else:
            for s in self.steppers:
                se = stepper_enable.lookup_enable(s.get_name())
                se.motor_disable(self.next_cmd_time)
        self.sync_print_time()
    def do_set_position(self, setpos):
        self.rail.set_position([setpos, 0., 0.])
    def do_move(self, movepos, speed, accel, sync=True):
        self.sync_print_time()
        cp = self.rail.get_commanded_position()
        dist = movepos - cp
        axis_r, accel_t, cruise_t, cruise_v = force_move.calc_move_time(
            dist, speed, accel)
        self.trapq_append(self.trapq, self.next_cmd_time,
                          accel_t, cruise_t, accel_t,
                          cp, 0., 0., axis_r, 0., 0.,
                          0., cruise_v, accel)
        self.next_cmd_time = self.next_cmd_time + accel_t + cruise_t + accel_t
        self.rail.generate_steps(self.next_cmd_time)
        self.trapq_free_moves(self.trapq, self.next_cmd_time + 99999.9)
        toolhead = self.printer.lookup_object('toolhead')
        toolhead.note_kinematic_activity(self.next_cmd_time)
        if sync:
            self.sync_print_time()
    def do_homing_move(self, movepos, speed, accel, triggered, check_trigger):
        if not self.can_home:
            raise self.printer.command_error(
                "No endstop for this manual stepper")
        # Notify start of homing/probing move
        endstops = self.rail.get_endstops()
        self.printer.send_event("homing:homing_move_begin",
                                [es for es, name in endstops])
        # Start endstop checking
        self.sync_print_time()
        endstops = self.rail.get_endstops()
        for mcu_endstop, name in endstops:
            min_step_dist = min([s.get_step_dist()
                                 for s in mcu_endstop.get_steppers()])
            mcu_endstop.home_start(
                self.next_cmd_time, ENDSTOP_SAMPLE_TIME, ENDSTOP_SAMPLE_COUNT,
                min_step_dist / speed, triggered=triggered)
        # Issue move
        self.do_move(movepos, speed, accel)
        # Wait for endstops to trigger
        error = None
        for mcu_endstop, name in endstops:
            did_trigger = mcu_endstop.home_wait(self.next_cmd_time)
            if not did_trigger and check_trigger and error is None:
                error = "Failed to home %s: Timeout during homing" % (name,)
        # Signal homing/probing move complete
        try:
            self.printer.send_event("homing:homing_move_end",
                                    [es for es, name in endstops])
        except CommandError as e:
            if error is None:
                error = str(e)
        self.sync_print_time()
        if error is not None:
            raise self.printer.command_error(error)
    cmd_MANUAL_STEPPER_help = "Command a manually configured stepper"
    def cmd_MANUAL_STEPPER(self, gcmd):
        enable = gcmd.get_int('ENABLE', None)
        if enable is not None:
            self.do_enable(enable)
        setpos = gcmd.get_float('SET_POSITION', None)
        if setpos is not None:
            self.do_set_position(setpos)
        speed = gcmd.get_float('SPEED', self.velocity, above=0.)
        accel = gcmd.get_float('ACCEL', self.accel, minval=0.)
        homing_move = gcmd.get_int('STOP_ON_ENDSTOP', 0)
        if homing_move:
            movepos = gcmd.get_float('MOVE')
            self.do_homing_move(movepos, speed, accel,
                                homing_move > 0, abs(homing_move) == 1)
        elif gcmd.get_float('MOVE', None) is not None:
            movepos = gcmd.get_float('MOVE')
            sync = gcmd.get_int('SYNC', 1)
            self.do_move(movepos, speed, accel, sync)
        elif gcmd.get_int('SYNC', 0):
            self.sync_print_time()

def load_config_prefix(config):
    return ManualStepper(config)