3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/test/klippy/printers.test

184 lines
7.3 KiB
Plaintext
Raw Normal View History

test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Basic sanity checks on the example printer config files
GCODE move.gcode
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
# Example kinematic files
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict
docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-17 02:47:32 +03:00
CONFIG ../../config/example-cartesian.cfg
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
CONFIG ../../config/example-corexy.cfg
corexz: Add CoreXZ kinematics (#3129) Add a CoreXZ kinematics Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
2020-07-30 19:42:23 +03:00
CONFIG ../../config/example-corexz.cfg
kinematics: Add hybrid-corexy and hybrid-corexz (#4229) Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2021-05-03 21:31:23 +03:00
CONFIG ../../config/example-hybrid-corexy.cfg
CONFIG ../../config/example-hybrid-corexz.cfg
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
CONFIG ../../config/example-delta.cfg
rotary_delta: Initial support for rotary delta kinematics Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-20 04:04:42 +03:00
CONFIG ../../config/example-rotary-delta.cfg
winch: Add experimental support for cable winch kinematics Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-13 06:28:58 +03:00
CONFIG ../../config/example-winch.cfg
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the atmega2560
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-einsy-rambo.cfg
config: Create generic-fysetc-f6.cfg This is my current config file for Fysect F6 + TMC2208 running on my Ender 3 with stock creality display. Signed-off-by: Simone Bonacini <bonacini.simone@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-09 01:31:38 +03:00
CONFIG ../../config/generic-fysetc-f6.cfg
config: Added example config file for Geeetech gt2560 controller. Signed-off-by: Ales Stimec <ales.stimec@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-24 12:14:42 +03:00
CONFIG ../../config/generic-gt2560.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-mini-rambo.cfg
CONFIG ../../config/generic-rambo.cfg
CONFIG ../../config/generic-ramps.cfg
CONFIG ../../config/generic-rumba.cfg
test: Add generic-ultimaker-ultimainboard-v2 to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-08 18:28:41 +03:00
CONFIG ../../config/generic-ultimaker-ultimainboard-v2.cfg
config: Updates to kit-zav3d-2019.cfg Minor updates to the kit-zav3d-2019.cfg to make it look more like other config files: specify the micro-controller type, use the klipper3d.org site for documentation links, avoid using SAVE_CONFIG sections in the example configs, add config to printers.test. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 21:48:37 +03:00
CONFIG ../../config/kit-zav3d-2019.cfg
test: Add printer-adimlab-2018.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-19 18:12:20 +03:00
CONFIG ../../config/printer-adimlab-2018.cfg
config: Added Anycubic 4Max printer config file Signed-off-by: Christian Toulon christian@bouncy-studio.com Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-19 10:24:03 +03:00
CONFIG ../../config/printer-anycubic-4max-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-anycubic-i3-mega-2017.cfg
CONFIG ../../config/printer-anycubic-kossel-2016.cfg
test: Add recent printer config files to printers.test test case Add printer-tronxy-x8-2018.cfg and printer-anycubic-kossel-plus-2017.cfg. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 19:04:39 +03:00
CONFIG ../../config/printer-anycubic-kossel-plus-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-creality-cr10s-2017.cfg
test: Add printer-creality-cr20-2018.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 04:51:58 +03:00
CONFIG ../../config/printer-creality-cr20-2018.cfg
config: Minor updates to printer-creality-cr20-pro-2019.cfg Don't specify a default for pressure_advance. Don't specify values that are already at their default. Add to printers.test test case. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-05 18:50:19 +03:00
CONFIG ../../config/printer-creality-cr20-pro-2019.cfg
config: Add printer-creality-ender5plus-2019.cfg example config Reported by @mihaiserban. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-25 19:43:52 +03:00
CONFIG ../../config/printer-creality-ender5plus-2019.cfg
config: Added config for Eryone Thinker Series (#4096) Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-04-07 21:10:59 +03:00
CONFIG ../../config/printer-eryone-thinker-series-v2-2020.cfg
config: Add printer-flashforge-creator-pro-2018.cfg to test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 20:58:24 +03:00
CONFIG ../../config/printer-flashforge-creator-pro-2018.cfg
test: Add printer-hiprecy-leo-2019.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-08 02:58:08 +03:00
CONFIG ../../config/printer-hiprecy-leo-2019.cfg
test: Add printer-longer-lk4-pro-2019.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 19:21:26 +03:00
CONFIG ../../config/printer-longer-lk4-pro-2019.cfg
config: Minor updates to printer-lulzbot-mini1-2016.cfg Add to printers.test test case. Don't disable the max_extrude_cross_section check by default (users should verify they want that safety feature off). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-05 18:57:47 +03:00
CONFIG ../../config/printer-lulzbot-mini1-2016.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-lulzbot-taz6-2017.cfg
test: Add printer-lulzbot-taz6-dual-v3-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-30 19:46:03 +03:00
CONFIG ../../config/printer-lulzbot-taz6-dual-v3-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-makergear-m2-2012.cfg
config: Add example config printer-makergear-m2-2016.cfg Reported by @N5QM. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-04 19:01:30 +03:00
CONFIG ../../config/printer-makergear-m2-2016.cfg
config: Add printer-micromake-d1-2016.cfg example config file Reported by IRC user "Xantos". Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-19 04:57:59 +03:00
CONFIG ../../config/printer-micromake-d1-2016.cfg
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-02 00:31:55 +03:00
CONFIG ../../config/printer-mtw-create-2015.cfg
test: Add printer-robo3d-r2-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-19 19:15:49 +03:00
CONFIG ../../config/printer-robo3d-r2-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg
config: Add printer-sovol-sv01-2020.cfg example config Reported by @lalek54. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-30 04:13:11 +03:00
CONFIG ../../config/printer-sovol-sv01-2020.cfg
config: Minor changes to printer-sunlu-s8-2020.cfg Remove default parameters from heater_fan section. Add to printers.test test cases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-26 20:26:11 +03:00
CONFIG ../../config/printer-sunlu-s8-2020.cfg
config: Add printer-tevo-flash-2018.cfg Reported by @RadianceNL. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-14 17:27:37 +03:00
CONFIG ../../config/printer-tevo-flash-2018.cfg
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 15:35:01 +03:00
CONFIG ../../config/printer-tevo-tarantula-pro-2020.cfg
config: Add printer-velleman-k8200-2013.cfg example config Based on config from @PerLangkjaer. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 18:45:17 +03:00
CONFIG ../../config/printer-velleman-k8200-2013.cfg
config: Minor updates to printer-velleman-k8800-2017.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-06 18:38:31 +03:00
CONFIG ../../config/printer-velleman-k8800-2017.cfg
test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-03 21:34:46 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-mini-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg
config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg Reported by @nzlrhyz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-09 05:30:07 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
test: Add printer-wanhao-duplicator-6-2016.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-17 05:45:31 +03:00
CONFIG ../../config/printer-wanhao-duplicator-6-2016.cfg
test: Add printer-wanhao-duplicator-9-2018.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-14 04:53:30 +03:00
CONFIG ../../config/printer-wanhao-duplicator-9-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
config: Add a generic-minitronics1.cfg example config file Information provided by @BKLronin. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 19:02:29 +03:00
# Printers using the atmega1280
DICTIONARY atmega1280.dict
config: Add generic-mightyboard.cfg Reported by @fragginright. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 01:49:10 +03:00
CONFIG ../../config/generic-mightyboard.cfg
config: Add a generic-minitronics1.cfg example config file Information provided by @BKLronin. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 19:02:29 +03:00
CONFIG ../../config/generic-minitronics1.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the atmega1284p
DICTIONARY atmega1284p.dict
CONFIG ../../config/generic-melzi.cfg
config: Add printer-anet-a4-2018.cfg config file Reported by @Alkarasu. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 06:11:34 +03:00
CONFIG ../../config/printer-anet-a4-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-anet-a8-2017.cfg
CONFIG ../../config/printer-anet-e10-2018.cfg
config: Add printer-anet-e16-2019.cfg example config file Reported by @dstack. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-11 19:33:43 +03:00
CONFIG ../../config/printer-anet-e16-2019.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-creality-cr10-2017.cfg
CONFIG ../../config/printer-creality-cr10mini-2017.cfg
test: Add Ender2 and ReArm configs to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:14:14 +03:00
CONFIG ../../config/printer-creality-ender2-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-creality-ender3-2018.cfg
test: Add printer-creality-ender5-2019.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 22:27:11 +03:00
CONFIG ../../config/printer-creality-ender5-2019.cfg
test: Fix printer-tronxy-p802e-2020.cfg and add to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-15 05:19:08 +03:00
CONFIG ../../config/printer-tronxy-p802e-2020.cfg
test: Add printer-tronxy-p802m-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-30 03:46:29 +03:00
CONFIG ../../config/printer-tronxy-p802m-2020.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-tronxy-x5s-2018.cfg
test: Add recent printer config files to printers.test test case Add printer-tronxy-x8-2018.cfg and printer-anycubic-kossel-plus-2017.cfg. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 19:04:39 +03:00
CONFIG ../../config/printer-tronxy-x8-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
test: Add generic-simulavr.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 07:25:24 +03:00
# Printers using the atmega644
DICTIONARY atmega644p.dict
CONFIG ../../config/generic-simulavr.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the at90usb1286
DICTIONARY at90usb1286.dict
CONFIG ../../config/generic-printrboard.cfg
config: Add generic-printrboard-g2.cfg config file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-29 18:39:59 +03:00
# Printers using the sam3x8c
DICTIONARY sam3x8c.dict
CONFIG ../../config/generic-printrboard-g2.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the sam3x8e
DICTIONARY sam3x8e.dict
config: Add example generic-archim2.cfg config Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 02:32:52 +03:00
CONFIG ../../config/generic-archim2.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-radds.cfg
config: Add generic-ruramps-v1.3.cfg to test cases and minor updates Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-12 17:25:41 +03:00
CONFIG ../../config/generic-ruramps-v1.3.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
config: Add an example config for the Duet2 Maestro Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-30 22:38:28 +03:00
# Printers using the sam4s8c
DICTIONARY sam4s8c.dict
CONFIG ../../config/generic-duet2-maestro.cfg
config: Add generic duet2 config and tests (#834) This adds a generic duet config with quad-z and quad extruders which also tests TMC2660 and SX1509 extras Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-31 16:58:43 +03:00
# Printers using the sam4e8e
DICTIONARY sam4e8e.dict
config: Add a simplified Duet2 Eth/Wifi example config file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 20:59:17 +03:00
CONFIG ../../config/generic-duet2.cfg
config: Rename generic-duet2.cfg to generic-duet2-duex.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 20:31:38 +03:00
CONFIG ../../config/generic-duet2-duex.cfg
config: Add generic duet2 config and tests (#834) This adds a generic duet config with quad-z and quad extruders which also tests TMC2660 and SX1509 extras Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-31 16:58:43 +03:00
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the lpc176x
DICTIONARY lpc176x.dict
config: Added Anycubic 4Max printer config file Signed-off-by: Christian Toulon christian@bouncy-studio.com Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-19 10:24:03 +03:00
CONFIG ../../config/generic-azteeg-x5-mini-v3.cfg
config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file Reported by @kinggrave. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-05 20:04:37 +03:00
CONFIG ../../config/generic-bigtreetech-skr-e3-turbo.cfg
config: Generic board BIGTREETECH SKR V1.1 config Signed-off-by: Rui Caridade <rui.mcbc@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-14 00:42:10 +03:00
CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg
config: Generic board BIGTREETECH SKR V.1.3 config Signed-off-by: Aleksander Sobolewski <aleks.sobolewski@outlook.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-02 21:46:46 +03:00
CONFIG ../../config/generic-bigtreetech-skr-v1.3.cfg
test: Add generic-bigtreetech-skr-v1.4.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-28 20:16:05 +03:00
CONFIG ../../config/generic-bigtreetech-skr-v1.4.cfg
config: Add an example generic-mks-sgenl.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 02:06:38 +03:00
CONFIG ../../config/generic-mks-sgenl.cfg
test: Add Ender2 and ReArm configs to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:14:14 +03:00
CONFIG ../../config/generic-re-arm.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-smoothieboard.cfg
test: Add support for testing klippy with multi-mcu configs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:52:23 +03:00
test: Add printer-monoprice-mini-delta-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 07:19:06 +03:00
# Printers using the stm32f070
DICTIONARY stm32f070.dict
CONFIG ../../config/printer-monoprice-mini-delta-2017.cfg
config: Minor updates to printer-monoprice-select-mini-v2-2018.cfg Minor indentation changes and remove default values for heater_fan. Add to printers.test test cases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-26 04:41:39 +03:00
CONFIG ../../config/printer-monoprice-select-mini-v2-2018.cfg
test: Add printer-monoprice-mini-delta-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 07:19:06 +03:00
config: Add an example config file for the bigtreetech skr mini Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 04:42:20 +03:00
# Printers using the stm32f103
test: Use more descriptive mcu chip names Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:23:33 +03:00
DICTIONARY stm32f103.dict
config: Add an example config file for the bigtreetech skr mini Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 04:42:20 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini.cfg
config: Rename config to generic-bigtreetech-skr-mini-e3-v1.0.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 22:04:15 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v1.0.cfg
test: Add generic-bigtreetech-skr-mini-e3-v1.2.cfg to config tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 22:01:34 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v1.2.cfg
config: Fixes for generic-bigtreetech-skr-mini-e3-v2.0.cfg Add config file to printers.test. Fix errors in config and unify settings with the mini-e3-v1.2 config. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-04 18:46:57 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
config: Add example generic-bigtreetech-skr-mini-mz.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 02:30:04 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-mz.cfg
config: Add generic-bigtreetech-skr-e3-dip.cfg config Reported by @salimvanak. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 22:59:26 +03:00
CONFIG ../../config/generic-bigtreetech-skr-e3-dip.cfg
config: Add an example config file for the bigtreetech skr mini Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 04:42:20 +03:00
config: Add example config files for the Fysetc Cheetah boards Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 03:14:07 +03:00
# Printers using the stm32f103 via serial
test: Use more descriptive mcu chip names Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:23:33 +03:00
DICTIONARY stm32f103-serial.dict
config: Add a generic-creality-v4.2.7.cfg example config Reported by @Feche and @yjh0502 . Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-29 18:45:44 +03:00
CONFIG ../../config/generic-creality-v4.2.7.cfg
config: Add Creality CR-30 PrintMill support Add support for the Creality CR-30 'PrintMill', and its base board, the Creality v4.2.10. Add them to the `test/klippy/printers.test` test suite Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 02:21:39 +03:00
CONFIG ../../config/generic-creality-v4.2.10.cfg
config: Add example config files for the Fysetc Cheetah boards Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 03:14:07 +03:00
CONFIG ../../config/generic-fysetc-cheetah-v1.1.cfg
CONFIG ../../config/generic-fysetc-cheetah-v1.2.cfg
config: Example configuration for MKS Robin E3D/E3 Signed-off-by: Kianusch Sayah Karadji <kianusch@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-21 15:51:35 +03:00
CONFIG ../../config/generic-mks-robin-e3.cfg
config: Rename generic-mks-robin-nano.cfg to generic-mks-robin-nano-v1.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 18:00:53 +03:00
CONFIG ../../config/generic-mks-robin-nano-v1.cfg
config: Add example generic-mks-robin-nano-v2.cfg config Reported by @mks-viva. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 17:59:45 +03:00
CONFIG ../../config/generic-mks-robin-nano-v2.cfg
config: Add example printer-alfawise-u30-2018.cfg config Reported by @elegos. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-31 04:26:31 +03:00
CONFIG ../../config/printer-alfawise-u30-2018.cfg
config: Add Creality CR-30 PrintMill support Add support for the Creality CR-30 'PrintMill', and its base board, the Creality v4.2.10. Add them to the `test/klippy/printers.test` test suite Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 02:21:39 +03:00
CONFIG ../../config/printer-creality-cr30-2021.cfg
test: Add printer-creality-cr6se-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 18:54:31 +03:00
CONFIG ../../config/printer-creality-cr6se-2020.cfg
test: Add printer-creality-cr6se-2021.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-23 04:18:45 +03:00
CONFIG ../../config/printer-creality-cr6se-2021.cfg
config: Minor updates to printer-creality-ender3-v2-2020.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-02 23:22:59 +03:00
CONFIG ../../config/printer-creality-ender3-v2-2020.cfg
test: Add printer-creality-ender3max-2021.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-03 02:16:40 +03:00
CONFIG ../../config/printer-creality-ender3max-2021.cfg
config: Add printer-creality-ender3pro-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-31 04:53:26 +03:00
CONFIG ../../config/printer-creality-ender3pro-2020.cfg
test: Add printer-creality-ender6-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-21 19:08:24 +03:00
CONFIG ../../config/printer-creality-ender6-2020.cfg
test: Add printer-flsun-q5-2020.cfg to printers.test and minor changes Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-22 23:29:34 +03:00
CONFIG ../../config/printer-flsun-q5-2020.cfg
config: Add printer-fokoos-odin5-f3.cfg (#4286) Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
2021-05-12 22:00:06 +03:00
CONFIG ../../config/printer-fokoos-odin5-f3-2021.cfg
config: Minor updates to printer-tronxy-x5sa-v6-2019.cfg Minor changes to default config and add to printers.test. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 20:04:40 +03:00
CONFIG ../../config/printer-tronxy-x5sa-v6-2019.cfg
config: Updates to printer-tronxy-x5sa-pro-2020.cfg Minor updates to use default values. Also, add to printers.test test cases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 07:16:09 +03:00
CONFIG ../../config/printer-tronxy-x5sa-pro-2020.cfg
config: Add example printer-twotrees-sapphire-pro-2020.cfg config Reported by @thucar. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-26 18:41:51 +03:00
CONFIG ../../config/printer-twotrees-sapphire-pro-2020.cfg
config: Add example printer-twotrees-sapphire-plus-2020.cfg config Signed-off-by: Pranas Kiziela <pranas.kiziela@gmail.com>
2020-12-13 14:59:21 +03:00
CONFIG ../../config/printer-twotrees-sapphire-plus-2020.cfg
config: Add example config files for the Fysetc Cheetah boards Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 03:14:07 +03:00
config: Add example generic-bigtreetech-skr-pro.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 01:44:21 +03:00
# Printers using the stm32f407
DICTIONARY stm32f407.dict
config: Update generic-bigtreetech-gtr.cfg Add generic-bigtreetech-gtr.cfg to printers.test. Add definitions for thermocouple and temperature_mcu. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-13 01:48:10 +03:00
CONFIG ../../config/generic-bigtreetech-gtr.cfg
config: Add example generic-bigtreetech-skr-pro.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 01:44:21 +03:00
CONFIG ../../config/generic-bigtreetech-skr-pro.cfg
test: Add generic-bigtreetech-skr-2.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-14 04:08:24 +03:00
CONFIG ../../config/generic-bigtreetech-skr-2.cfg
config: Add example generic-flyboard.cfg config file Reported by @DJDOUBLEG. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 03:22:30 +03:00
CONFIG ../../config/generic-flyboard.cfg
config: Add example generic-mks-robin-nano-v3.cfg config Reported by @mks-viva. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 17:56:51 +03:00
CONFIG ../../config/generic-mks-robin-nano-v3.cfg
config: Add example generic-bigtreetech-skr-pro.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 01:44:21 +03:00
test: Add generic-fysetc-s6.cfg to printer config test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:19:04 +03:00
# Printers using the stm32f446
DICTIONARY stm32f407.dict
CONFIG ../../config/generic-fysetc-s6.cfg
config: Add example generic-fysetc-s6-v2.cfg config file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-04 09:38:20 +03:00
CONFIG ../../config/generic-fysetc-s6-v2.cfg
config: add example configs for fysetc spider board Signed-off-by: George Fu <nailao_5918@163.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-13 09:20:43 +03:00
CONFIG ../../config/generic-fysetc-spider.cfg
config: Add generic-mks-rumba32-v1.0.cfg to tests Also remove copy of lcds from sample-lcd.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-12 02:23:42 +03:00
CONFIG ../../config/generic-mks-rumba32-v1.0.cfg
test: Add generic-fysetc-s6.cfg to printer config test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:19:04 +03:00
test: Add support for testing klippy with multi-mcu configs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:52:23 +03:00
# Printers using the PRU
DICTIONARY pru.dict host=linuxprocess.dict
CONFIG ../../config/generic-cramps.cfg
CONFIG ../../config/generic-replicape.cfg
# Tests with multiple mcus
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict zboard=atmega2560.dict auxboard=atmega2560.dict
config: Rename example-multi-mcu.cfg to sample-multi-mcu.cfg Rename the sample file to be more similar to the naming of other files. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-25 04:04:51 +03:00
CONFIG ../../config/sample-multi-mcu.cfg
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict z=atmega2560.dict
config: Example config file for a stock 250mm build VORON2 printer Example config file for a stock 250mm build VORON2 printer that matches the manual diagrams exactly for the controller layout and pins used. Signed-off-by: Ben Warren <boffdroid@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-15 20:18:27 +03:00
CONFIG ../../config/kit-voron2-250mm.cfg