3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/test/klippy/printers.test

274 lines
11 KiB
Plaintext
Raw Normal View History

test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Basic sanity checks on the example printer config files
GCODE move.gcode
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
# Example kinematic files
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict
docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-17 02:47:32 +03:00
CONFIG ../../config/example-cartesian.cfg
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
CONFIG ../../config/example-corexy.cfg
corexz: Add CoreXZ kinematics (#3129) Add a CoreXZ kinematics Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
2020-07-30 19:42:23 +03:00
CONFIG ../../config/example-corexz.cfg
kinematics: Add hybrid-corexy and hybrid-corexz (#4229) Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2021-05-03 21:31:23 +03:00
CONFIG ../../config/example-hybrid-corexy.cfg
CONFIG ../../config/example-hybrid-corexz.cfg
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
CONFIG ../../config/example-delta.cfg
kinematics: Add deltesian printers (#5743) Initial push of the working deltesian kinematics after some successful tests. Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2022-09-01 22:56:31 +03:00
CONFIG ../../config/example-deltesian.cfg
rotary_delta: Initial support for rotary delta kinematics Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-20 04:04:42 +03:00
CONFIG ../../config/example-rotary-delta.cfg
winch: Add experimental support for cable winch kinematics Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-13 06:28:58 +03:00
CONFIG ../../config/example-winch.cfg
test: Add example kinematic config files to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:16:50 +03:00
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the atmega2560
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-einsy-rambo.cfg
config: Create generic-fysetc-f6.cfg This is my current config file for Fysect F6 + TMC2208 running on my Ender 3 with stock creality display. Signed-off-by: Simone Bonacini <bonacini.simone@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-09 01:31:38 +03:00
CONFIG ../../config/generic-fysetc-f6.cfg
config: Added example config file for Geeetech gt2560 controller. Signed-off-by: Ales Stimec <ales.stimec@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-24 12:14:42 +03:00
CONFIG ../../config/generic-gt2560.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-mini-rambo.cfg
CONFIG ../../config/generic-rambo.cfg
CONFIG ../../config/generic-ramps.cfg
CONFIG ../../config/generic-rumba.cfg
test: Add generic-ultimaker-ultimainboard-v2 to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-08 18:28:41 +03:00
CONFIG ../../config/generic-ultimaker-ultimainboard-v2.cfg
config: Updates to kit-zav3d-2019.cfg Minor updates to the kit-zav3d-2019.cfg to make it look more like other config files: specify the micro-controller type, use the klipper3d.org site for documentation links, avoid using SAVE_CONFIG sections in the example configs, add config to printers.test. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 21:48:37 +03:00
CONFIG ../../config/kit-zav3d-2019.cfg
test: Add printer-adimlab-2018.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-19 18:12:20 +03:00
CONFIG ../../config/printer-adimlab-2018.cfg
config: Added Anycubic 4Max printer config file Signed-off-by: Christian Toulon christian@bouncy-studio.com Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-19 10:24:03 +03:00
CONFIG ../../config/printer-anycubic-4max-2018.cfg
config: Config for Anycubic 4MaxPro_2.0-2021 (#4557) This config I created and fully tested on my own printer Anycubic 4Max Pro 2.0. This works fine! Please note that this printer is different from the Anycubic 4MAX. Signed-off-by: Alexander Usachev <int_0x21@protonmail.com>
2021-09-21 19:56:30 +03:00
CONFIG ../../config/printer-anycubic-4maxpro-2.0-2021.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-anycubic-i3-mega-2017.cfg
CONFIG ../../config/printer-anycubic-kossel-2016.cfg
test: Add recent printer config files to printers.test test case Add printer-tronxy-x8-2018.cfg and printer-anycubic-kossel-plus-2017.cfg. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 19:04:39 +03:00
CONFIG ../../config/printer-anycubic-kossel-plus-2017.cfg
config: Add BQ Hephestos printer (#5676) This is a working config with full LCD and stepper settings (only thing missing is the kill switch, which did not appear to work) Signed-off-by: Rui Carmo <rui.carmo@gmail.com>
2022-08-19 20:57:18 +03:00
CONFIG ../../config/printer-bq-hephestos-2014.cfg
config: Example config file for Creality CR5 Pro HT (#6089) Signed-off-by: Brandon Baker <bakerbrandond@gmail.com>
2023-03-11 19:30:35 +03:00
CONFIG ../../config/printer-creality-cr5pro-ht-2022.cfg
test: Fix ordering of printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-30 02:37:52 +03:00
CONFIG ../../config/printer-creality-cr10-v3-2020.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-creality-cr10s-2017.cfg
test: Add printer-creality-cr20-2018.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 04:51:58 +03:00
CONFIG ../../config/printer-creality-cr20-2018.cfg
config: Minor updates to printer-creality-cr20-pro-2019.cfg Don't specify a default for pressure_advance. Don't specify values that are already at their default. Add to printers.test test case. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-05 18:50:19 +03:00
CONFIG ../../config/printer-creality-cr20-pro-2019.cfg
config: Add printer-creality-ender5plus-2019.cfg example config Reported by @mihaiserban. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-25 19:43:52 +03:00
CONFIG ../../config/printer-creality-ender5plus-2019.cfg
config: Added config for Eryone Thinker Series (#4096) Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-04-07 21:10:59 +03:00
CONFIG ../../config/printer-eryone-thinker-series-v2-2020.cfg
config: Add printer-flashforge-creator-pro-2018.cfg to test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 20:58:24 +03:00
CONFIG ../../config/printer-flashforge-creator-pro-2018.cfg
test: Add printer-hiprecy-leo-2019.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-08 02:58:08 +03:00
CONFIG ../../config/printer-hiprecy-leo-2019.cfg
test: Add printer-longer-lk4-pro-2019.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 19:21:26 +03:00
CONFIG ../../config/printer-longer-lk4-pro-2019.cfg
config: Minor updates to printer-lulzbot-mini1-2016.cfg Add to printers.test test case. Don't disable the max_extrude_cross_section check by default (users should verify they want that safety feature off). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-05 18:57:47 +03:00
CONFIG ../../config/printer-lulzbot-mini1-2016.cfg
config: Example config file for Lulzbot Mini 2 (#5976) Config file contains pin mappings to suit Lulzbot Mini 2 using Lulzbot SingleExtruder(0.5mm) and Lulzbot flexible magnetic bed. Mini 2 uses Einsy Retro mainboard. Signed-off-by: Trent Sheather <trent.sheather@gmail.com>
2023-01-31 05:47:05 +03:00
CONFIG ../../config/printer-lulzbot-mini2-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-lulzbot-taz6-2017.cfg
test: Add printer-lulzbot-taz6-dual-v3-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-30 19:46:03 +03:00
CONFIG ../../config/printer-lulzbot-taz6-dual-v3-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-makergear-m2-2012.cfg
config: Add example config printer-makergear-m2-2016.cfg Reported by @N5QM. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-04 19:01:30 +03:00
CONFIG ../../config/printer-makergear-m2-2016.cfg
config: Add printer-micromake-d1-2016.cfg example config file Reported by IRC user "Xantos". Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-19 04:57:59 +03:00
CONFIG ../../config/printer-micromake-d1-2016.cfg
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-02 00:31:55 +03:00
CONFIG ../../config/printer-mtw-create-2015.cfg
test: Add printer-robo3d-r2-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-19 19:15:49 +03:00
CONFIG ../../config/printer-robo3d-r2-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg
config: Add printer-sovol-sv01-2020.cfg example config Reported by @lalek54. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-30 04:13:11 +03:00
CONFIG ../../config/printer-sovol-sv01-2020.cfg
config: Minor changes to printer-sunlu-s8-2020.cfg Remove default parameters from heater_fan section. Add to printers.test test cases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-26 20:26:11 +03:00
CONFIG ../../config/printer-sunlu-s8-2020.cfg
config: Add printer-tevo-flash-2018.cfg Reported by @RadianceNL. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-14 17:27:37 +03:00
CONFIG ../../config/printer-tevo-flash-2018.cfg
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 15:35:01 +03:00
CONFIG ../../config/printer-tevo-tarantula-pro-2020.cfg
config: Add printer-velleman-k8200-2013.cfg example config Based on config from @PerLangkjaer. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 18:45:17 +03:00
CONFIG ../../config/printer-velleman-k8200-2013.cfg
config: Minor updates to printer-velleman-k8800-2017.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-06 18:38:31 +03:00
CONFIG ../../config/printer-velleman-k8800-2017.cfg
test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-03 21:34:46 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-mini-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg
config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg Reported by @nzlrhyz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-09 05:30:07 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
test: Add printer-wanhao-duplicator-6-2016.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-17 05:45:31 +03:00
CONFIG ../../config/printer-wanhao-duplicator-6-2016.cfg
test: Add printer-wanhao-duplicator-9-2018.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-14 04:53:30 +03:00
CONFIG ../../config/printer-wanhao-duplicator-9-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
config: Add a generic-minitronics1.cfg example config file Information provided by @BKLronin. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 19:02:29 +03:00
# Printers using the atmega1280
DICTIONARY atmega1280.dict
config: Add generic-mightyboard.cfg Reported by @fragginright. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 01:49:10 +03:00
CONFIG ../../config/generic-mightyboard.cfg
config: Add a generic-minitronics1.cfg example config file Information provided by @BKLronin. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 19:02:29 +03:00
CONFIG ../../config/generic-minitronics1.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the atmega1284p
DICTIONARY atmega1284p.dict
CONFIG ../../config/generic-melzi.cfg
config: Add printer-anet-a4-2018.cfg config file Reported by @Alkarasu. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 06:11:34 +03:00
CONFIG ../../config/printer-anet-a4-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-anet-a8-2017.cfg
config: Create printer-anet-a8-2019.cfg (#5902) Added config for Anet A8 2019 (Plus model) Signed-off-by: Bradley Methorst <bradley-methorst@outlook.com>
2022-11-15 21:56:14 +03:00
CONFIG ../../config/printer-anet-a8-2019.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-anet-e10-2018.cfg
config: Add printer-anet-e16-2019.cfg example config file Reported by @dstack. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-11 19:33:43 +03:00
CONFIG ../../config/printer-anet-e16-2019.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-creality-cr10-2017.cfg
CONFIG ../../config/printer-creality-cr10mini-2017.cfg
test: Add Ender2 and ReArm configs to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:14:14 +03:00
CONFIG ../../config/printer-creality-ender2-2017.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-creality-ender3-2018.cfg
test: Add printer-creality-ender5-2019.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 22:27:11 +03:00
CONFIG ../../config/printer-creality-ender5-2019.cfg
test: Fix printer-tronxy-p802e-2020.cfg and add to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-15 05:19:08 +03:00
CONFIG ../../config/printer-tronxy-p802e-2020.cfg
test: Add printer-tronxy-p802m-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-30 03:46:29 +03:00
CONFIG ../../config/printer-tronxy-p802m-2020.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-tronxy-x5s-2018.cfg
test: Add recent printer config files to printers.test test case Add printer-tronxy-x8-2018.cfg and printer-anycubic-kossel-plus-2017.cfg. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 19:04:39 +03:00
CONFIG ../../config/printer-tronxy-x8-2018.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
test: Add generic-simulavr.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 07:25:24 +03:00
# Printers using the atmega644
DICTIONARY atmega644p.dict
CONFIG ../../config/generic-simulavr.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the at90usb1286
DICTIONARY at90usb1286.dict
CONFIG ../../config/generic-printrboard.cfg
config: Add generic-printrboard-g2.cfg config file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-29 18:39:59 +03:00
# Printers using the sam3x8c
DICTIONARY sam3x8c.dict
CONFIG ../../config/generic-printrboard-g2.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the sam3x8e
DICTIONARY sam3x8e.dict
dac084S085: SPI DAC DAC084S085 implementation (#5134) Alligator Board Rev2 tested config sample. Add example configuration file for Alligator board rev.3. Signed-off-by: Lorenzo Franco <lorenzo.franco@lorenzing.com>
2022-02-22 18:28:28 +03:00
CONFIG ../../config/generic-alligator-r2.cfg
CONFIG ../../config/generic-alligator-r3.cfg
config: Add example generic-archim2.cfg config Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 02:32:52 +03:00
CONFIG ../../config/generic-archim2.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-radds.cfg
config: Add generic-ruramps-v1.3.cfg to test cases and minor updates Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-12 17:25:41 +03:00
CONFIG ../../config/generic-ruramps-v1.3.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
config: Add an example config for the Duet2 Maestro Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-30 22:38:28 +03:00
# Printers using the sam4s8c
DICTIONARY sam4s8c.dict
CONFIG ../../config/generic-duet2-maestro.cfg
config: Add generic duet2 config and tests (#834) This adds a generic duet config with quad-z and quad extruders which also tests TMC2660 and SX1509 extras Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-31 16:58:43 +03:00
# Printers using the sam4e8e
DICTIONARY sam4e8e.dict
config: Add a simplified Duet2 Eth/Wifi example config file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 20:59:17 +03:00
CONFIG ../../config/generic-duet2.cfg
config: Rename generic-duet2.cfg to generic-duet2-duex.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 20:31:38 +03:00
CONFIG ../../config/generic-duet2-duex.cfg
config: Add configuration for Modix Big60 printer (#4986) Signed-off-by: Gabriel Smolnycki <gabjsmo0@gmail.com>
2021-12-15 22:06:29 +03:00
CONFIG ../../config/printer-modix-big60-2020.cfg
config: Add generic duet2 config and tests (#834) This adds a generic duet config with quad-z and quad extruders which also tests TMC2660 and SX1509 extras Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-31 16:58:43 +03:00
config: Add generic-duet3-mini.cfg Adds Duet3 Mini Config with support for expansion header Signed-off-by: Luke Ashley <Luke@Lukeslab.online> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-02 22:22:23 +03:00
# Printers using the samd51
DICTIONARY samd51p20.dict
CONFIG ../../config/generic-duet3-mini.cfg
config: Duet3-6HC & -6XD Configs (#6006) Signed-off-by: Evan Cowden <evan38109@gmail.com>
2023-01-25 23:28:53 +03:00
# Printers using the SAM E70
DICTIONARY same70q20b.dict
CONFIG ../../config/generic-duet3-6hc.cfg
CONFIG ../../config/generic-duet3-6xd.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
# Printers using the lpc176x
DICTIONARY lpc176x.dict
config: Added Anycubic 4Max printer config file Signed-off-by: Christian Toulon christian@bouncy-studio.com Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-19 10:24:03 +03:00
CONFIG ../../config/generic-azteeg-x5-mini-v3.cfg
config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file Reported by @kinggrave. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-05 20:04:37 +03:00
CONFIG ../../config/generic-bigtreetech-skr-e3-turbo.cfg
config: Generic board BIGTREETECH SKR V1.1 config Signed-off-by: Rui Caridade <rui.mcbc@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-14 00:42:10 +03:00
CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg
config: Generic board BIGTREETECH SKR V.1.3 config Signed-off-by: Aleksander Sobolewski <aleks.sobolewski@outlook.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-02 21:46:46 +03:00
CONFIG ../../config/generic-bigtreetech-skr-v1.3.cfg
test: Add generic-bigtreetech-skr-v1.4.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-28 20:16:05 +03:00
CONFIG ../../config/generic-bigtreetech-skr-v1.4.cfg
config: Add an example generic-mks-sgenl.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 02:06:38 +03:00
CONFIG ../../config/generic-mks-sgenl.cfg
test: Add Ender2 and ReArm configs to printers.test testcase Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:14:14 +03:00
CONFIG ../../config/generic-re-arm.cfg
test: Add basic klippy regression tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-12 03:53:32 +03:00
CONFIG ../../config/generic-smoothieboard.cfg
test: Minor file ordering change to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-14 21:50:20 +03:00
CONFIG ../../config/generic-th3d-ezboard-lite-v1.2.cfg
test: Add support for testing klippy with multi-mcu configs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:52:23 +03:00
test: Add printer-monoprice-mini-delta-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 07:19:06 +03:00
# Printers using the stm32f070
DICTIONARY stm32f070.dict
CONFIG ../../config/printer-monoprice-mini-delta-2017.cfg
config: Minor updates to printer-monoprice-select-mini-v2-2018.cfg Minor indentation changes and remove default values for heater_fan. Add to printers.test test cases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-26 04:41:39 +03:00
CONFIG ../../config/printer-monoprice-select-mini-v2-2018.cfg
test: Add printer-monoprice-mini-delta-2017.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 07:19:06 +03:00
config: Add an example config file for the bigtreetech skr mini Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 04:42:20 +03:00
# Printers using the stm32f103
test: Use more descriptive mcu chip names Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:23:33 +03:00
DICTIONARY stm32f103.dict
test: Fix ordering of printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-30 02:37:52 +03:00
CONFIG ../../config/generic-bigtreetech-skr-cr6-v1.0.cfg
CONFIG ../../config/generic-bigtreetech-skr-e3-dip.cfg
config: Add an example config file for the bigtreetech skr mini Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 04:42:20 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini.cfg
config: Rename config to generic-bigtreetech-skr-mini-e3-v1.0.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 22:04:15 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v1.0.cfg
test: Add generic-bigtreetech-skr-mini-e3-v1.2.cfg to config tests Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 22:01:34 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v1.2.cfg
config: Fixes for generic-bigtreetech-skr-mini-e3-v2.0.cfg Add config file to printers.test. Fix errors in config and unify settings with the mini-e3-v1.2 config. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-04 18:46:57 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
config: Add example generic-bigtreetech-skr-mini-mz.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 02:30:04 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-mz.cfg
config: Anycubic Vyper (#4740) This commit contains a configuration for the Anycubic Vyper printer from 2021. It uses a clone of the STM32F103 chip named GD32F103. There are 2 Mainboard versions out there v0.0.5 and v0.0.6, this config has been tested with the v0.0.6 only. It should probably work for v0.0.5 as well since there are no different changes in the Anycubic Marlin firmware. The LCD is not supported yet (might work, but didn't try yet). Signed-off-by: Marc Neuhaus <marc@neuhaus.nrw> Signed-off-by: Manuel Fichtner <manuel.fichtner@me.com>
2021-10-11 23:26:14 +03:00
CONFIG ../../config/printer-anycubic-vyper-2021.cfg
test: Add printer-monoprice-select-mini-v1-2016.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-14 21:20:24 +03:00
CONFIG ../../config/printer-monoprice-select-mini-v1-2016.cfg
config: Add config printer-sovol-sv05-2022.cfg (#6122) Adding Sovol SV06 printer config Signed-off-by: Joseph Spainhour <spinixguy@gmail.com>
2023-03-29 16:55:02 +03:00
CONFIG ../../config/printer-sovol-sv05-2022.cfg
config: Add printer sovol sv06 config file (#6056) Signed-off-by: Joseph Spainhour <spinixguy@gmail.com>
2023-02-14 21:26:10 +03:00
CONFIG ../../config/printer-sovol-sv06-2022.cfg
config: Added printer config for SUNLU T3 (#6004) Signed-off-by: Zachary Welvaert <zwelvaert@gmail.com>
2023-01-30 18:46:51 +03:00
CONFIG ../../config/printer-sunlu-t3-2022.cfg
config: Add an example config file for the bigtreetech skr mini Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 04:42:20 +03:00
config: Add example config files for the Fysetc Cheetah boards Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 03:14:07 +03:00
# Printers using the stm32f103 via serial
test: Use more descriptive mcu chip names Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:23:33 +03:00
DICTIONARY stm32f103-serial.dict
config: Add a generic-creality-v4.2.7.cfg example config Reported by @Feche and @yjh0502 . Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-29 18:45:44 +03:00
CONFIG ../../config/generic-creality-v4.2.7.cfg
config: Add Creality CR-30 PrintMill support Add support for the Creality CR-30 'PrintMill', and its base board, the Creality v4.2.10. Add them to the `test/klippy/printers.test` test suite Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 02:21:39 +03:00
CONFIG ../../config/generic-creality-v4.2.10.cfg
config: Add example config files for the Fysetc Cheetah boards Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 03:14:07 +03:00
CONFIG ../../config/generic-fysetc-cheetah-v1.1.cfg
CONFIG ../../config/generic-fysetc-cheetah-v1.2.cfg
config: Example configuration for MKS Robin E3D/E3 Signed-off-by: Kianusch Sayah Karadji <kianusch@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-21 15:51:35 +03:00
CONFIG ../../config/generic-mks-robin-e3.cfg
config: Rename generic-mks-robin-nano.cfg to generic-mks-robin-nano-v1.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 18:00:53 +03:00
CONFIG ../../config/generic-mks-robin-nano-v1.cfg
config: Add example generic-mks-robin-nano-v2.cfg config Reported by @mks-viva. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 17:59:45 +03:00
CONFIG ../../config/generic-mks-robin-nano-v2.cfg
config: Add example printer-alfawise-u30-2018.cfg config Reported by @elegos. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-31 04:26:31 +03:00
CONFIG ../../config/printer-alfawise-u30-2018.cfg
config: Add config for CR-10 Smart Pro, including installation instructions (#5396) The pinout was found by windowpainting, initial config by Subwooferbone, tweaked by iblue. Signed-off-by: Markus Fenske <iblue@gmx.net>
2022-04-07 18:59:04 +03:00
CONFIG ../../config/printer-creality-cr10-smart-pro-2022.cfg
config: Add Creality CR-30 PrintMill support Add support for the Creality CR-30 'PrintMill', and its base board, the Creality v4.2.10. Add them to the `test/klippy/printers.test` test suite Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 02:21:39 +03:00
CONFIG ../../config/printer-creality-cr30-2021.cfg
test: Add printer-creality-cr6se-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 18:54:31 +03:00
CONFIG ../../config/printer-creality-cr6se-2020.cfg
test: Add printer-creality-cr6se-2021.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-23 04:18:45 +03:00
CONFIG ../../config/printer-creality-cr6se-2021.cfg
config: Adds Ender 2 Pro config (#5359) Adds a default config for Ender 2 Pro. Printer uses creality 4.2.3 board Signed-off-by: Spencer Owen <owenspencer@gmail.com>
2022-03-18 03:43:55 +03:00
CONFIG ../../config/printer-creality-ender2pro-2021.cfg
config: Ender 3 S1/S1 Pro Default Configurations (#5332) Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
2022-05-23 22:23:22 +03:00
CONFIG ../../config/printer-creality-ender3-s1-2021.cfg
config: Add Ender 3 S1 Plus (#5705) Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
2022-09-16 19:06:49 +03:00
CONFIG ../../config/printer-creality-ender3-s1plus-2022.cfg
config: Minor updates to printer-creality-ender3-v2-2020.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-02 23:22:59 +03:00
CONFIG ../../config/printer-creality-ender3-v2-2020.cfg
config: Add Ender 3 v2 Neo base config (#6103) Add the default base config for the Ender 3 v2 Neo (as released 2022). This config also works with the newer D32F303 based 4.2.2 boards. Signed-off-by: Sam McLeod <sammcj@users.noreply.github.com>
2023-03-15 04:05:08 +03:00
CONFIG ../../config/printer-creality-ender3-v2-neo-2022.cfg
test: Add printer-creality-ender3max-2021.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-03 02:16:40 +03:00
CONFIG ../../config/printer-creality-ender3max-2021.cfg
config: Add printer-creality-ender3pro-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-31 04:53:26 +03:00
CONFIG ../../config/printer-creality-ender3pro-2020.cfg
config: Added Config for Creality Ender 5 Pro 2020 (#4836) Signed-off-by: Maxim Schessler <maxim.schessler@gmail.com>
2022-03-19 03:42:15 +03:00
CONFIG ../../config/printer-creality-ender5pro-2020.cfg
test: Add printer-creality-ender6-2020.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-21 19:08:24 +03:00
CONFIG ../../config/printer-creality-ender6-2020.cfg
config: add support for creality sermoon D1 printer (#4621) Signed-off-by: Shi Pan <twinkle-pirate@hotmail.com>
2021-09-25 19:17:02 +03:00
CONFIG ../../config/printer-creality-sermoonD1-2021.cfg
config: Integrate configuration file for Creality Sermoon V1. (#5621) Configuration for the stock Creality Sermoon V1. Signed-off-by: Du Chengyao <hbyls@live.com>
2022-07-22 04:45:05 +03:00
CONFIG ../../config/printer-creality-sermoonV1-2022.cfg
config: Elegoo Neptune 2 config update (#5213) Signed-off-by: Trey Wentz <trey.wentz@gmail.com>
2022-03-14 19:50:38 +03:00
CONFIG ../../config/printer-elegoo-neptune2-2021.cfg
config: New printer profile for Eryone ER20 and minor update for Eryone Thinker Series (#4491) This config was a community effort and was author and tested by sihawken, 3D.Subzwari & dapostol73. Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-07-15 21:11:55 +03:00
CONFIG ../../config/printer-eryone-er20-2021.cfg
test: Add printer-flsun-q5-2020.cfg to printers.test and minor changes Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-22 23:29:34 +03:00
CONFIG ../../config/printer-flsun-q5-2020.cfg
config: added a configuration file for FLSUN QQ-S Pro delta printer (#4237) Signed-off-by: Joseph Orduna <joey.orduna@gmail.com>
2021-06-28 01:27:39 +03:00
CONFIG ../../config/printer-flsun-qqs-2020.cfg
config: Add printer-fokoos-odin5-f3.cfg (#4286) Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
2021-05-12 22:00:06 +03:00
CONFIG ../../config/printer-fokoos-odin5-f3-2021.cfg
config: Rename printer-geeetech-301.cfg to printer-geeetech-301-2019.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-11-14 19:30:27 +03:00
CONFIG ../../config/printer-geeetech-301-2019.cfg
config: Add config for Kingroon KP3S (#6021) A config that describes a Kingroon KP3S with the STM32F103 Robin Mini/Nano clone Signed-off-by: James Hartley <james@hartleyns.com>
2023-02-03 18:47:58 +03:00
CONFIG ../../config/printer-kingroon-kp3s-2020.cfg
config : Longer LK4 X (#6185) New printer : Longer LK4X configuration This configuration is based on the one provided by Longer with some tweaks. Signed-off-by: Thomas Lété <bistory@gmail.com>
2023-05-01 20:30:32 +03:00
CONFIG ../../config/printer-longer-lk4x-2022.cfg
config: Minor updates to printer-tronxy-x5sa-v6-2019.cfg Minor changes to default config and add to printers.test. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 20:04:40 +03:00
CONFIG ../../config/printer-tronxy-x5sa-v6-2019.cfg
config: Updates to printer-tronxy-x5sa-pro-2020.cfg Minor updates to use default values. Also, add to printers.test test cases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 07:16:09 +03:00
CONFIG ../../config/printer-tronxy-x5sa-pro-2020.cfg
config: Minor updates to printer-tronxy-xy-2-Pro-2020.cfg Change extruder microsteps to 32. Add to printers.test regression test case. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-26 23:11:13 +03:00
CONFIG ../../config/printer-tronxy-xy-2-Pro-2020.cfg
config: Updated and created new TwoTrees configs to avoid confusion (#5365) * Update and rename printer-twotrees-sapphire-pro-2020.cfg to printer-twotrees-sapphire-pro-sp-3.cfg I renamed the file since the printer name now changed and is sold with this name, there is only one version so year can be removed. -Added detailed instructions for flashing in the header. -Corrected rotation distances for axes, it was wrong. -Added gear ratio for extruder that is useful for future changes. -Added heater fan to HE1 pins for automatic shutdown with temp. -Reduced speed and accel for Z since a 2mm screw is used. * Create printer-twotrees-sapphire-plus-sp-5-v1.1.cfg I created the file since the printer name now changed and is sold with this name, there are 2 main versions (V1 and V1.1) so I will make 2 different configs for them since there are some hardware change and people are confused in what to change. The difference with V1 is that all 2225 drivers are now used, since microsteps tables change for these drivers and by factory all jumpers are in the microstep setting is 32, people don't know this and will have half movement with the v1 config, there is a lot of confusion in communities so I think adding another file is the best option. Signed-off-by: Lorenzo Cascone <laurienzudesign@gmail.com>
2022-04-13 18:07:13 +03:00
CONFIG ../../config/printer-twotrees-sapphire-plus-sp-5-v1-2020.cfg
CONFIG ../../config/printer-twotrees-sapphire-plus-sp-5-v1.1-2021.cfg
CONFIG ../../config/printer-twotrees-sapphire-pro-sp-3-2020.cfg
stm32: Add support for Nation N32G45x mcus (#6116) N32G452/G455 are mostly compatible with STM32F103 but have M4 core and different ADC. Signed-off-by: Alexey Golyshin <stas2z@gmail.com>
2023-04-07 19:20:14 +03:00
CONFIG ../../config/printer-voxelab-aquila-2021.cfg
config: Add example config files for the Fysetc Cheetah boards Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 03:14:07 +03:00
config: Add Artillery Sidewinder X2 2022 stock printer.cfg (#5810) Works for unmodified stock Artillery Sidewinder X2, year 2022 with Artillery Ruby v1.2 mainboard. All by default connected things are working fine. Build firmware with architecture STM32F401 with "No bootloader". Other settings keep ther defaults Signed-off-by: Frank Roth <developer@freakydu.de>
2022-10-22 04:03:57 +03:00
# Printers using the stm32f401
DICTIONARY stm32f401.dict
config: Add Fysetc Cheetah V2.0 (#6119) This adds support for the Cheetah v2.0 mainboard from Fysetc. Signed-off-by: Benjamin Lesher <bbro44@protonmail.com>
2023-03-20 18:06:44 +03:00
CONFIG ../../config/generic-fysetc-cheetah-v2.0.cfg
config: Add Artillery Sidewinder X2 2022 stock printer.cfg (#5810) Works for unmodified stock Artillery Sidewinder X2, year 2022 with Artillery Ruby v1.2 mainboard. All by default connected things are working fine. Build firmware with architecture STM32F401 with "No bootloader". Other settings keep ther defaults Signed-off-by: Frank Roth <developer@freakydu.de>
2022-10-22 04:03:57 +03:00
CONFIG ../../config/printer-artillery-sidewinder-x2-2022.cfg
config: Add printer-elegoo-neptune3-pro configuration (#5965) Adds a configuration for the Elegoo Neptune 3 Pro. Signed-off-by: Koz Ross <koz.ross@retro-freedom.nz>
2023-03-15 03:56:45 +03:00
CONFIG ../../config/printer-elegoo-neptune3-pro-2023.cfg
config: Add Artillery Sidewinder X2 2022 stock printer.cfg (#5810) Works for unmodified stock Artillery Sidewinder X2, year 2022 with Artillery Ruby v1.2 mainboard. All by default connected things are working fine. Build firmware with architecture STM32F401 with "No bootloader". Other settings keep ther defaults Signed-off-by: Frank Roth <developer@freakydu.de>
2022-10-22 04:03:57 +03:00
config:Create configuration file for Fly-Gemini-v1 motherboard (#5474) Create configuration file for Fly-Gemini-v1 motherboard Add stm32f405 and generic-mellow-fly-gemini-v1.cfg to test cases Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-14 17:36:10 +03:00
# Printers using the stm32f405
DICTIONARY stm32f405.dict
CONFIG ../../config/generic-mellow-fly-gemini-v1.cfg
config: Create configuration file for Fly-Gemini-v2 and Fly-CDY-V3 motherboard (#5508) Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-18 19:28:23 +03:00
CONFIG ../../config/generic-mellow-fly-gemini-v2.cfg
config:Create configuration file for Fly-Gemini-v1 motherboard (#5474) Create configuration file for Fly-Gemini-v1 motherboard Add stm32f405 and generic-mellow-fly-gemini-v1.cfg to test cases Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-14 17:36:10 +03:00
config: Add example generic-bigtreetech-skr-pro.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 01:44:21 +03:00
# Printers using the stm32f407
DICTIONARY stm32f407.dict
config: Adds generic config for BigTreeTech SKR E3 RRF 1.1 Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2021-08-10 17:01:06 +03:00
CONFIG ../../config/generic-bigtreetech-e3-rrf-v1.1.cfg
config: Update generic-bigtreetech-gtr.cfg Add generic-bigtreetech-gtr.cfg to printers.test. Add definitions for thermocouple and temperature_mcu. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-13 01:48:10 +03:00
CONFIG ../../config/generic-bigtreetech-gtr.cfg
config: Add example generic-bigtreetech-skr-pro.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 01:44:21 +03:00
CONFIG ../../config/generic-bigtreetech-skr-pro.cfg
test: Add generic-bigtreetech-skr-2.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-14 04:08:24 +03:00
CONFIG ../../config/generic-bigtreetech-skr-2.cfg
config: Add example generic-flyboard.cfg config file Reported by @DJDOUBLEG. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-24 03:22:30 +03:00
CONFIG ../../config/generic-flyboard.cfg
config: Create configuration file for Fly-Gemini-v2 and Fly-CDY-V3 motherboard (#5508) Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-18 19:28:23 +03:00
CONFIG ../../config/generic-mellow-fly-cdy-v3.cfg
test: Add generic-mellow-super-infinty-hv.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-21 21:10:13 +03:00
CONFIG ../../config/generic-mellow-super-infinty-hv.cfg
config: Add example generic-mks-robin-nano-v3.cfg config Reported by @mks-viva. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 17:56:51 +03:00
CONFIG ../../config/generic-mks-robin-nano-v3.cfg
config: Rename generic-buddy.cfg to generic-prusa-buddy.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-14 19:40:36 +03:00
CONFIG ../../config/generic-prusa-buddy.cfg
config: Update and rename generic-th3d-ezboard-lite-v2.0.cfg to generic-th3d-… (#6070) The actual board name is EZBoard V2 without the lite. Renaming the file and correcting the intro text to reflect the actual board name. Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
2023-02-23 19:46:21 +03:00
CONFIG ../../config/generic-th3d-ezboard-v2.0.cfg
test: Add printer-biqu-b1-se-plus-2022.cfg to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-30 01:10:47 +03:00
CONFIG ../../config/printer-biqu-b1-se-plus-2022.cfg
test: Fix ordering of printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-30 02:37:52 +03:00
CONFIG ../../config/printer-prusa-mini-plus-2020.cfg
config: Add example generic-bigtreetech-skr-pro.cfg config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 01:44:21 +03:00
test: Add generic-fysetc-s6.cfg to printer config test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:19:04 +03:00
# Printers using the stm32f446
test: Fix typos related to STM32F446 (#4444) Signed-off-by: Charles Pickering <charles.pickering@live.com>
2021-07-01 03:09:36 +03:00
DICTIONARY stm32f446.dict
config: Create config for BigTreeTech Octopus (#4441) Information and some lines verbatim were sourced from the official BigTreeTech Octopus GitHub repository to make this configuration as well as existing configurations in the same folder as this one Signed-off-by: Charles Pickering <charles.pickering@live.com>
2021-07-09 18:13:26 +03:00
CONFIG ../../config/generic-bigtreetech-octopus.cfg
test: Add generic-fysetc-s6.cfg to printer config test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:19:04 +03:00
CONFIG ../../config/generic-fysetc-s6.cfg
config: Add example generic-fysetc-s6-v2.cfg config file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-04 09:38:20 +03:00
CONFIG ../../config/generic-fysetc-s6-v2.cfg
config: add example configs for fysetc spider board Signed-off-by: George Fu <nailao_5918@163.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-13 09:20:43 +03:00
CONFIG ../../config/generic-fysetc-spider.cfg
config: Add generic-mks-rumba32-v1.0.cfg to tests Also remove copy of lcds from sample-lcd.cfg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-12 02:23:42 +03:00
CONFIG ../../config/generic-mks-rumba32-v1.0.cfg
config: Add Ratrig V-Minion (#6120) This adds support for the stock configuration of the V-Minion printer from Ratrig, based on the Octopus v1.1 (STM32F446) Signed-off-by: Benjamin Lesher <bbro44@protonmail.com>
2023-03-29 16:53:54 +03:00
CONFIG ../../config/printer-ratrig-v-minion-2021.cfg
test: Add generic-fysetc-s6.cfg to printer config test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 19:19:04 +03:00
config: Add BigTreeTech EBB V1.2 / EBB SB V1.0 / E3EZ / M5P / M8P V1.1 / Octopus Max EZ Signed-off-by: Alan.Ma from BigTreeTech tech@biqu3d.com Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-12 10:51:37 +03:00
# Printers using the stm32h723
DICTIONARY stm32h723.dict
CONFIG ../../config/generic-bigtreetech-octopus-max-ez.cfg
config: Add BIQU BX printer config (#4950) Signed-off-by: Aaron DeLyser <bluwolf@gmail.com>
2022-01-29 21:31:41 +03:00
# Printers using the stm32h743
DICTIONARY stm32h743.dict
CONFIG ../../config/printer-biqu-bx-2021.cfg
config: Add BigTreeTech EBB V1.2 / EBB SB V1.0 / E3EZ / M5P / M8P V1.1 / Octopus Max EZ Signed-off-by: Alan.Ma from BigTreeTech tech@biqu3d.com Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-12 10:51:37 +03:00
CONFIG ../../config/generic-bigtreetech-skr-3.cfg
config: Add BIQU BX printer config (#4950) Signed-off-by: Aaron DeLyser <bluwolf@gmail.com>
2022-01-29 21:31:41 +03:00
test: Add stm32g0 and generic-bigtreetech-skr-mini-e3-v3.0.cfg to test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-24 19:43:08 +03:00
# Printers using the stm32g0b1
DICTIONARY stm32g0b1.dict
test: Add btt manta config files to printers.test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-10-13 18:16:59 +03:00
CONFIG ../../config/generic-bigtreetech-manta-m4p.cfg
config: Add BigTreeTech EBB V1.2 / EBB SB V1.0 / E3EZ / M5P / M8P V1.1 / Octopus Max EZ Signed-off-by: Alan.Ma from BigTreeTech tech@biqu3d.com Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-12 10:51:37 +03:00
CONFIG ../../config/generic-bigtreetech-manta-m5p.cfg
CONFIG ../../config/generic-bigtreetech-manta-m8p-v1.0.cfg
CONFIG ../../config/generic-bigtreetech-manta-m8p-v1.1.cfg
CONFIG ../../config/generic-bigtreetech-manta-e3ez.cfg
test: Add stm32g0 and generic-bigtreetech-skr-mini-e3-v3.0.cfg to test cases Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-24 19:43:08 +03:00
CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v3.0.cfg
config: Minor updates to generic-bigtreetech-skr-pico-v1.0.cfg Small wording change and add to printer test cases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-27 20:32:12 +03:00
# Printers using the rp2040
DICTIONARY rp2040.dict
CONFIG ../../config/generic-bigtreetech-skr-pico-v1.0.cfg
config: Add Anycubic Kobra Plus (#6084) Signed-off-by: Derek Kaser <derek.kaser@gmail.com>
2023-03-15 03:58:42 +03:00
# Anycubic Printers using trigorilla board with the hc32f460
DICTIONARY hc32f460-serial-PA3PA2.dict
config: Add printer configuration for Anycubic Kobra Go (#6166) Signed-off-by: Yipeng Zhou <yipeng_zhou@foxmail.com>
2023-04-16 05:24:02 +03:00
CONFIG ../../config/printer-anycubic-kobra-go-2022.cfg
config: Add Anycubic Kobra Plus (#6084) Signed-off-by: Derek Kaser <derek.kaser@gmail.com>
2023-03-15 03:58:42 +03:00
CONFIG ../../config/printer-anycubic-kobra-plus-2022.cfg
test: Add support for testing klippy with multi-mcu configs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 20:52:23 +03:00
# Printers using the PRU
DICTIONARY pru.dict host=linuxprocess.dict
CONFIG ../../config/generic-cramps.cfg
CONFIG ../../config/generic-replicape.cfg
# Tests with multiple mcus
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict zboard=atmega2560.dict auxboard=atmega2560.dict
config: Rename example-multi-mcu.cfg to sample-multi-mcu.cfg Rename the sample file to be more similar to the naming of other files. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-25 04:04:51 +03:00
CONFIG ../../config/sample-multi-mcu.cfg
test: Rename atmega2560-16mhz.config to atmega2560.config There's no need to include the 16mhz as basically all atmega chips are run at 16mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 19:36:18 +03:00
DICTIONARY atmega2560.dict z=atmega2560.dict
config: Example config file for a stock 250mm build VORON2 printer Example config file for a stock 250mm build VORON2 printer that matches the manual diagrams exactly for the controller layout and pins used. Signed-off-by: Ben Warren <boffdroid@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-15 20:18:27 +03:00
CONFIG ../../config/kit-voron2-250mm.cfg