3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/lib/README

102 lines
4.2 KiB
Plaintext
Raw Normal View History

avr: Initial support for Atmel AT90USB1286 mcu Add GPIO definitions for the AT90USB1286. Add code for communicating over USB port on AT90USB1286. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-06-05 02:34:39 +03:00
This directory contains external library code.
lib: Add CMSIS_5 files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-27 21:16:54 +03:00
The cmsis directory contains code from:
https://github.com/ARM-software/CMSIS_5
version 5.3.0 (49ac527aa7406cecbba46d4d3bdbc7f60c6c6d42). Contents
taken from the CMSIS/Core/Include/ directory.
lib: Add Atmel SAM3X CMSIS files Add most recent SAM3X CMSIS files from Atmel. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-31 17:38:19 +03:00
The sam3x directory contains code from the
Atmel.SAM3X_DFP.1.0.50.atpack zip file found at:
http://packs.download.atmel.com/
lib: Remove now unused ARM Cortex-M linker scripts and boot assembly Remove the unused files for those boards converted to use the armcm_boot mechanism. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:02:48 +03:00
version 1.0.50 (extracted on 20180725).
lib: Add Atmel SAM3X CMSIS files Add most recent SAM3X CMSIS files from Atmel. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-31 17:38:19 +03:00
lib: Rename lib/cmsis-sam4e/ to lib/sam4e/ This is in preparation for merging the sam3 and sam4 code. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-26 23:46:25 +03:00
The sam4e directory contains code from the
Atmel.SAM4E_DFP.1.1.57.atpack zip file found at:
http://packs.download.atmel.com/
lib: Remove now unused ARM Cortex-M linker scripts and boot assembly Remove the unused files for those boards converted to use the armcm_boot mechanism. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:02:48 +03:00
version 1.1.57 (extracted on 20180806). It has been modified to fix
some AFEC register RW accesses. See sam4e.patch for the modifications.
lib: Rename lib/cmsis-sam4e/ to lib/sam4e/ This is in preparation for merging the sam3 and sam4 code. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-26 23:46:25 +03:00
lib: Add sam4s cmsis headers Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-21 02:25:46 +03:00
The sam4s directory contains code from the
Atmel.SAM4S_DFP.1.0.56.atpack zip file found at:
http://packs.download.atmel.com/
lib: Remove now unused ARM Cortex-M linker scripts and boot assembly Remove the unused files for those boards converted to use the armcm_boot mechanism. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:02:48 +03:00
version 1.0.56 (extracted on 20181220).
lib: Add sam4s cmsis headers Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-21 02:25:46 +03:00
lib: Add Atmel SAMD21 cmsis headers Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-27 21:24:01 +03:00
The samd21 directory contains code from the
Atmel.SAMD21_DFP.1.3.304.atpack zip file found at:
http://packs.download.atmel.com/
lib: Remove now unused ARM Cortex-M linker scripts and boot assembly Remove the unused files for those boards converted to use the armcm_boot mechanism. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:02:48 +03:00
version 1.3.304 (extracted on 20180725).
lib: Add Atmel SAMD21 cmsis headers Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-27 21:24:01 +03:00
lib: Add Atmel SAMD51 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-15 00:26:47 +03:00
The samd51 directory contains code from the
Atmel.SAMD51_DFP.1.1.96.atpack zip file found at:
http://packs.download.atmel.com/
lib: Remove now unused ARM Cortex-M linker scripts and boot assembly Remove the unused files for those boards converted to use the armcm_boot mechanism. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:02:48 +03:00
version 1.1.96 (extracted on 20190110).
lib: Add Atmel SAMD51 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-15 00:26:47 +03:00
lpc176x: Add initial support for LPC176x processors Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-08 04:32:27 +03:00
The lpc176x directory contains code from the mbed project:
https://github.com/ARMmbed/mbed-os
version mbed-os-5.8.3 (c05d72c3c005fbb7e92c3994c32bda45218ae7fe).
lpc176x: Use common cmsis-core files No need to include separate cmsis files from the mbed project - the standard CMSIS_5 files work fine. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-31 21:11:25 +03:00
Contents taken from the targets/TARGET_NXP/TARGET_LPC176X/ directory.
lib: No need to make lpc176x SystemInit() externally visible Now that the lpc176x code uses the armcm_boot mechanism, it is no longer necessary for SystemInit to be externally visible. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:18:44 +03:00
It has been modified to set the appropriate clock speeds on the
LPC1768 and LPC1769. See lpc176x.patch for the modifications.
lpc176x: Add initial support for LPC176x processors Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-08 04:32:27 +03:00
lib: Update stm32f0 to use upstream github source Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-03 01:00:06 +03:00
The stm32f0 directory contains code from:
https://github.com/STMicroelectronics/STM32CubeF0
version v1.10.1 (d0c380d668c67dcdd4e44f656be27045ce4006a6). Contents
taken from the Drivers/CMSIS/Device/ST/STM32F0xx/ directory.
lib: Add a copy of stm32f0 cmsis files from v1.10.0 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-16 18:19:42 +03:00
lib: Update stm32f1 code to version 1.8.0 Update the stm32f1 code to the latest from ST. Merge the lib/cmsis-stm32f1/ and lib/hal-stm32f1/ into a single lib/stm32f1/ directory. Document all the differences from the pristine upstream code. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-22 03:29:14 +03:00
The stm32f1 directory contains code from STMicroelectronics:
Add STM32F103 port Add a fully functional STM32F1 port, currently mostly targeting STM32F103 microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate is around 282K steps per second. This uses stm32flash to burn the firmware. The bootloader needs to be started by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader, unlike on Arduino. Signed-off-by: Grigori Goronzy <greg@kinoho.net>
2018-03-31 16:34:59 +03:00
http://www.st.com/en/embedded-software/stm32cubef1.html
lib: It is no longer necessary to modify the stm32f1 code Now that the stm32f1 code uses the armcm_boot mechanism, it is no longer necessary for SystemInit to be externally visible. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:13:38 +03:00
version 1.8.0 (extracted 20190721).
stm32: Initial support for stm32f2 (#3001) Initial support for stm32f2 in general and STM32F207 in particular. Boots up and communicates on STM32F207VC. Signed-off-by: Boleslaw Ciesielski <combolek@users.noreply.github.com>
2020-06-23 17:52:15 +03:00
The stm32f2 directory contains code from STMicroelectronics:
https://www.st.com/content/st_com/en/products/embedded-software/mcu-mpu-embedded-software/stm32-embedded-software/stm32cube-mcu-mpu-packages/stm32cubef2.html
version 1.9.0 (extracted 20200614).
Add STM32F103 port Add a fully functional STM32F1 port, currently mostly targeting STM32F103 microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate is around 282K steps per second. This uses stm32flash to burn the firmware. The bootloader needs to be started by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader, unlike on Arduino. Signed-off-by: Grigori Goronzy <greg@kinoho.net>
2018-03-31 16:34:59 +03:00
lib: Add stm32f4 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-24 06:02:44 +03:00
The stm32f4 directory contains code from STMicroelectronics:
http://www.st.com/en/embedded-software/stm32cubef4.html
lib: It is no longer necessary to modify the stm32f4 code Now that the stm32f4 code uses the armcm_boot mechanism, it is no longer necessary for SystemInit to be externally visible. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-22 04:10:25 +03:00
version 1.24.0 (extracted 20190723).
lib: Add stm32f4 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-24 06:02:44 +03:00
lib: Add rp2040 build files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-20 03:05:48 +03:00
The rp2040 directory contains code from the pico sdk:
https://github.com/raspberrypi/pico-sdk.git
lib: Changes to rp2040 build files to work in Klipper build system Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-20 04:42:40 +03:00
version 1.2.0 (bfcbefafc5d2a210551a4d9d80b4303d4ae0adf7). It has been
modified so that it can build outside of the pico sdk. See
rp2040.patch for the modifications.
lib: Add rp2040 build files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-20 03:05:48 +03:00
hub-ctrl: Add support for micro-controller reset via RPi usb power toggling Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 19:09:37 +03:00
The hub-ctrl directory contains code from:
https://github.com/codazoda/hub-ctrl.c/
revision 42095e522859059e8a5f4ec05c1e3def01a870a9.
pru: Add initial pru_rpmsg library code for Beaglebone PRU Add external code for using RPMsg on the Beaglebone PRU. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-08 04:19:10 +03:00
lib: Add bossac 1.9 code to lib directory Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-17 00:03:23 +03:00
The bossac directory contains code from:
https://github.com/shumatech/BOSSA
version 1.9 (b176eeef918fc810045c832348590595120187b4).
lib: Add info on hidflash to README.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-28 21:52:46 +03:00
The hidflash directory contains code from:
https://github.com/Serasidis/STM32_HID_Bootloader
version 2.2.2 (2ab7927a27b7b78ef730782ea5f9b5d2c8f34671). It has been
modified to work with Klipper - see hidflash/README for the
details. See changes.diff for the modifications.
pru: Add initial pru_rpmsg library code for Beaglebone PRU Add external code for using RPMsg on the Beaglebone PRU. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-08 04:19:10 +03:00
The pru_rpmsg directory contains code from:
https://github.com/dinuxbg/pru-gcc-examples
revision 425a42d82006cf0aa24be27b483d2f6a41607489. The code is taken
from the repo's hc-sr04-range-sensor directory. It has been modified
so that the IEP definitions compile correctly. See pru_rpmsg.patch for
the modifications.
stm32: Improvements to CAN bus ID generation. And added a small fast hash library (#3165) Improved CAM bus ID generation, there were issues with ID collisions. Added a small fast hash library. Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
2020-08-10 04:07:59 +03:00
The fast-hash directory contains code from:
https://github.com/ztanml/fast-hash
lib: Fix whitespace in README Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-10 04:10:08 +03:00
revision ae3bb53c199fe75619e940b5b6a3584ede99c5fc
lib: Add kconfiglib code Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-19 04:26:58 +03:00
The kconfiglib directory contains code from:
https://github.com/ulfalizer/Kconfiglib.git
kconfiglib: Update README with info on kconfiglib modifications Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-19 19:55:13 +03:00
version v14.1.0 (061e71f7d78cb057762d88de088055361863deff). It has
been modified to always emit symbols and to simplify the "menuconfig"
screens. See kconfiglib.patch for the modifications.
lib: add FatFS notes to README Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-01-16 14:56:36 +03:00
The fatfs directory contains code from:
http://elm-chan.org/fsw/ff/00index_e.html
version R0.14a (extracted 20210116). The configuration (ffconf.h)
has been modfied to enable the US code page (437) and enable label
support. The file "diskio.c" in the original archive is not included
as it is only serves as an example for how to implement the media api
callbacks.