132 lines
5.6 KiB
Python
132 lines
5.6 KiB
Python
|
# Code for handling the kinematics of polar robots
|
||
|
#
|
||
|
# Copyright (C) 2018 Kevin O'Connor <kevin@koconnor.net>
|
||
|
#
|
||
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
||
|
import logging, math
|
||
|
import stepper, homing
|
||
|
|
||
|
class PolarKinematics:
|
||
|
def __init__(self, toolhead, config):
|
||
|
# Setup axis steppers
|
||
|
stepper_bed = stepper.PrinterStepper(config.getsection('stepper_bed'))
|
||
|
rail_arm = stepper.PrinterRail(config.getsection('stepper_arm'))
|
||
|
rail_z = stepper.LookupMultiRail(config.getsection('stepper_z'))
|
||
|
stepper_bed.setup_itersolve('polar_stepper_alloc', 'a')
|
||
|
rail_arm.setup_itersolve('polar_stepper_alloc', 'r')
|
||
|
rail_z.setup_itersolve('cartesian_stepper_alloc', 'z')
|
||
|
self.rails = [rail_arm, rail_z]
|
||
|
self.steppers = [stepper_bed] + [ s for r in self.rails
|
||
|
for s in r.get_steppers() ]
|
||
|
# Setup boundary checks
|
||
|
max_velocity, max_accel = toolhead.get_max_velocity()
|
||
|
self.max_z_velocity = config.getfloat(
|
||
|
'max_z_velocity', max_velocity, above=0., maxval=max_velocity)
|
||
|
self.max_z_accel = config.getfloat(
|
||
|
'max_z_accel', max_accel, above=0., maxval=max_accel)
|
||
|
self.need_motor_enable = True
|
||
|
self.limit_z = [(1.0, -1.0)]
|
||
|
self.limit_xy2 = -1.
|
||
|
# Setup stepper max halt velocity
|
||
|
max_halt_velocity = toolhead.get_max_axis_halt()
|
||
|
stepper_bed.set_max_jerk(max_halt_velocity, max_accel)
|
||
|
rail_arm.set_max_jerk(max_halt_velocity, max_accel)
|
||
|
rail_z.set_max_jerk(max_halt_velocity, max_accel)
|
||
|
def get_steppers(self, flags=""):
|
||
|
if flags == "Z":
|
||
|
return self.rails[1].get_steppers()
|
||
|
return list(self.steppers)
|
||
|
def calc_position(self):
|
||
|
bed_angle = self.steppers[0].get_commanded_position()
|
||
|
arm_pos = self.rails[0].get_commanded_position()
|
||
|
z_pos = self.rails[1].get_commanded_position()
|
||
|
return [math.cos(bed_angle) * arm_pos, math.sin(bed_angle) * arm_pos,
|
||
|
z_pos]
|
||
|
def set_position(self, newpos, homing_axes):
|
||
|
for s in self.steppers:
|
||
|
s.set_position(newpos)
|
||
|
if 2 in homing_axes:
|
||
|
self.limit_z = self.rails[1].get_range()
|
||
|
if 0 in homing_axes and 1 in homing_axes:
|
||
|
self.limit_xy2 = self.rails[0].get_range()[1]**2
|
||
|
def _home_axis(self, homing_state, axis, rail):
|
||
|
# Determine movement
|
||
|
position_min, position_max = rail.get_range()
|
||
|
hi = rail.get_homing_info()
|
||
|
homepos = [None, None, None, None]
|
||
|
homepos[axis] = hi.position_endstop
|
||
|
if axis == 0:
|
||
|
homepos[1] = 0.
|
||
|
forcepos = list(homepos)
|
||
|
if hi.positive_dir:
|
||
|
forcepos[axis] -= hi.position_endstop - position_min
|
||
|
else:
|
||
|
forcepos[axis] += position_max - hi.position_endstop
|
||
|
# Perform homing
|
||
|
limit_speed = None
|
||
|
if axis == 2:
|
||
|
limit_speed = self.max_z_velocity
|
||
|
homing_state.home_rails([rail], forcepos, homepos, limit_speed)
|
||
|
def home(self, homing_state):
|
||
|
# Always home XY together
|
||
|
homing_axes = homing_state.get_axes()
|
||
|
home_xy = 0 in homing_axes or 1 in homing_axes
|
||
|
home_z = 2 in homing_axes
|
||
|
updated_axes = []
|
||
|
if home_xy:
|
||
|
updated_axes = [0, 1]
|
||
|
if home_z:
|
||
|
updated_axes.append(2)
|
||
|
homing_state.set_axes(updated_axes)
|
||
|
# Do actual homing
|
||
|
if home_xy:
|
||
|
self._home_axis(homing_state, 0, self.rails[0])
|
||
|
if home_z:
|
||
|
self._home_axis(homing_state, 2, self.rails[1])
|
||
|
def motor_off(self, print_time):
|
||
|
self.limit_z = [(1.0, -1.0)]
|
||
|
self.limit_xy2 = -1.
|
||
|
for s in self.steppers:
|
||
|
s.motor_enable(print_time, 0)
|
||
|
self.need_motor_enable = True
|
||
|
def _check_motor_enable(self, print_time, move):
|
||
|
if move.axes_d[0] or move.axes_d[1]:
|
||
|
self.steppers[0].motor_enable(print_time, 1)
|
||
|
self.rails[0].motor_enable(print_time, 1)
|
||
|
if move.axes_d[2]:
|
||
|
self.rails[1].motor_enable(print_time, 1)
|
||
|
need_motor_enable = not self.steppers[0].is_motor_enabled()
|
||
|
for rail in self.rails:
|
||
|
need_motor_enable |= not rail.is_motor_enabled()
|
||
|
self.need_motor_enable = need_motor_enable
|
||
|
def check_move(self, move):
|
||
|
end_pos = move.end_pos
|
||
|
xy2 = end_pos[0]**2 + end_pos[1]**2
|
||
|
if xy2 > self.limit_xy2:
|
||
|
if self.limit_xy2 < 0.:
|
||
|
raise homing.EndstopMoveError(end_pos, "Must home axis first")
|
||
|
raise homing.EndstopMoveError(end_pos)
|
||
|
if move.axes_d[2]:
|
||
|
if end_pos[2] < self.limit_z[0] or end_pos[2] > self.limit_z[1]:
|
||
|
if self.limit_z[0] > self.limit_z[1]:
|
||
|
raise homing.EndstopMoveError(
|
||
|
end_pos, "Must home axis first")
|
||
|
raise homing.EndstopMoveError(end_pos)
|
||
|
# Move with Z - update velocity and accel for slower Z axis
|
||
|
z_ratio = move.move_d / abs(move.axes_d[2])
|
||
|
move.limit_speed(
|
||
|
self.max_z_velocity * z_ratio, self.max_z_accel * z_ratio)
|
||
|
def move(self, print_time, move):
|
||
|
if self.need_motor_enable:
|
||
|
self._check_motor_enable(print_time, move)
|
||
|
axes_d = move.axes_d
|
||
|
cmove = move.cmove
|
||
|
if axes_d[0] or axes_d[1]:
|
||
|
self.steppers[0].step_itersolve(cmove)
|
||
|
self.rails[0].step_itersolve(cmove)
|
||
|
if axes_d[2]:
|
||
|
self.rails[1].step_itersolve(cmove)
|
||
|
|
||
|
def load_kinematics(toolhead, config):
|
||
|
return PolarKinematics(toolhead, config)
|