271 lines
10 KiB
C
271 lines
10 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f0xx_hal_crc_ex.c
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief Extended CRC HAL module driver.
|
||
|
|
* This file provides firmware functions to manage the following
|
||
|
|
* functionalities of the CRC peripheral:
|
||
|
|
* + Extended initialization functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
================================================================================
|
||
|
|
##### How to use this driver #####
|
||
|
|
================================================================================
|
||
|
|
[..]
|
||
|
|
(+) Extended initialization
|
||
|
|
(+) Set or not user-defined generating
|
||
|
|
polynomial other than default one
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f0xx_hal.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup CRCEx CRCEx
|
||
|
|
* @brief CRC Extended HAL module driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef HAL_CRC_MODULE_ENABLED
|
||
|
|
|
||
|
|
/* Private typedef -----------------------------------------------------------*/
|
||
|
|
/* Private define ------------------------------------------------------------*/
|
||
|
|
/* Private macro -------------------------------------------------------------*/
|
||
|
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
/* Private function prototypes -----------------------------------------------*/
|
||
|
|
/* Private functions ---------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup CRCEx_Exported_Functions CRCEx Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
|
||
|
|
* @brief Extended Initialization and Configuration functions.
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
===============================================================================
|
||
|
|
##### Initialization and Configuration functions #####
|
||
|
|
===============================================================================
|
||
|
|
[..] This section provides functions allowing to:
|
||
|
|
(+) Initialize the CRC generating polynomial: if programmable polynomial
|
||
|
|
feature is applicable to device, set default or non-default generating
|
||
|
|
polynomial according to hcrc->Init.DefaultPolynomialUse parameter.
|
||
|
|
If feature is non-applicable to device in use, HAL_CRCEx_Init straight
|
||
|
|
away reports HAL_OK.
|
||
|
|
(+) Set the generating polynomial
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Extended initialization to set generating polynomial
|
||
|
|
* @param hcrc CRC handle
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_CRCEx_Init(CRC_HandleTypeDef *hcrc)
|
||
|
|
{
|
||
|
|
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined (STM32F098xx)
|
||
|
|
/* check whether or not non-default generating polynomial has been
|
||
|
|
* picked up by user */
|
||
|
|
assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse));
|
||
|
|
if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE)
|
||
|
|
{
|
||
|
|
/* initialize IP with default generating polynomial */
|
||
|
|
WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY);
|
||
|
|
MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B);
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* initialize CRC IP with generating polynomial defined by user */
|
||
|
|
if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK)
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined (STM32F098xx) */
|
||
|
|
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set the Reverse Input data mode.
|
||
|
|
* @param hcrc CRC handle
|
||
|
|
* @param InputReverseMode Input Data inversion mode
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg CRC_INPUTDATA_NOINVERSION: no change in bit order (default value)
|
||
|
|
* @arg CRC_INPUTDATA_INVERSION_BYTE: Byte-wise bit reversal
|
||
|
|
* @arg CRC_INPUTDATA_INVERSION_HALFWORD: HalfWord-wise bit reversal
|
||
|
|
* @arg CRC_INPUTDATA_INVERSION_WORD: Word-wise bit reversal
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode));
|
||
|
|
|
||
|
|
/* Change CRC peripheral state */
|
||
|
|
hcrc->State = HAL_CRC_STATE_BUSY;
|
||
|
|
|
||
|
|
/* set input data inversion mode */
|
||
|
|
MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode);
|
||
|
|
/* Change CRC peripheral state */
|
||
|
|
hcrc->State = HAL_CRC_STATE_READY;
|
||
|
|
|
||
|
|
/* Return function status */
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set the Reverse Output data mode.
|
||
|
|
* @param hcrc CRC handle
|
||
|
|
* @param OutputReverseMode Output Data inversion mode
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg CRC_OUTPUTDATA_INVERSION_DISABLE: no CRC inversion (default value)
|
||
|
|
* @arg CRC_OUTPUTDATA_INVERSION_ENABLE: bit-level inversion (e.g for a 8-bit CRC: 0xB5 becomes 0xAD)
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode));
|
||
|
|
|
||
|
|
/* Change CRC peripheral state */
|
||
|
|
hcrc->State = HAL_CRC_STATE_BUSY;
|
||
|
|
|
||
|
|
/* set output data inversion mode */
|
||
|
|
MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode);
|
||
|
|
|
||
|
|
/* Change CRC peripheral state */
|
||
|
|
hcrc->State = HAL_CRC_STATE_READY;
|
||
|
|
|
||
|
|
/* Return function status */
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F091xC) || defined (STM32F098xx)
|
||
|
|
/**
|
||
|
|
* @brief Initializes the CRC polynomial if different from default one.
|
||
|
|
* @param hcrc CRC handle
|
||
|
|
* @param Pol CRC generating polynomial (7, 8, 16 or 32-bit long)
|
||
|
|
* This parameter is written in normal representation, e.g.
|
||
|
|
* for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65
|
||
|
|
* for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021
|
||
|
|
* @param PolyLength CRC polynomial length
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg CRC_POLYLENGTH_7B: 7-bit long CRC (generating polynomial of degree 7)
|
||
|
|
* @arg CRC_POLYLENGTH_8B: 8-bit long CRC (generating polynomial of degree 8)
|
||
|
|
* @arg CRC_POLYLENGTH_16B: 16-bit long CRC (generating polynomial of degree 16)
|
||
|
|
* @arg CRC_POLYLENGTH_32B: 32-bit long CRC (generating polynomial of degree 32)
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength)
|
||
|
|
{
|
||
|
|
uint32_t msb = 31U; /* polynomial degree is 32 at most, so msb is initialized to max value */
|
||
|
|
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_CRC_POL_LENGTH(PolyLength));
|
||
|
|
|
||
|
|
/* check polynomial definition vs polynomial size:
|
||
|
|
* polynomial length must be aligned with polynomial
|
||
|
|
* definition. HAL_ERROR is reported if Pol degree is
|
||
|
|
* larger than that indicated by PolyLength.
|
||
|
|
* Look for MSB position: msb will contain the degree of
|
||
|
|
* the second to the largest polynomial member. E.g., for
|
||
|
|
* X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */
|
||
|
|
while (((Pol & (1U << msb)) == 0U) && (msb-- > 0U))
|
||
|
|
{}
|
||
|
|
|
||
|
|
switch (PolyLength)
|
||
|
|
{
|
||
|
|
case CRC_POLYLENGTH_7B:
|
||
|
|
if (msb >= HAL_CRC_LENGTH_7B)
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
case CRC_POLYLENGTH_8B:
|
||
|
|
if (msb >= HAL_CRC_LENGTH_8B)
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
case CRC_POLYLENGTH_16B:
|
||
|
|
if (msb >= HAL_CRC_LENGTH_16B)
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
case CRC_POLYLENGTH_32B:
|
||
|
|
/* no polynomial definition vs. polynomial length issue possible */
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* set generating polynomial */
|
||
|
|
WRITE_REG(hcrc->Instance->POL, Pol);
|
||
|
|
|
||
|
|
/* set generating polynomial size */
|
||
|
|
MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength);
|
||
|
|
|
||
|
|
/* Return function status */
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
#endif /* #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F091xC) || defined (STM32F098xx) */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
#endif /* HAL_CRC_MODULE_ENABLED */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|