klipper/src/atsam/Kconfig

# Kconfig settings for Atmel SAM processors

if MACH_ATSAM

config ATSAM_SELECT
    bool
    default y
    select HAVE_GPIO
    select HAVE_GPIO_ADC
    select HAVE_GPIO_I2C
    select HAVE_GPIO_SPI
    select HAVE_GPIO_BITBANGING

config BOARD_DIRECTORY
    string
    default "atsam"

choice
    prompt "Processor model"
    config MACH_SAM3X8E
        bool "SAM3x8e (Arduino Due)"
    config MACH_SAM4S8C
        bool "SAM4s8c (Duet Maestro)"
    config MACH_SAM4E8E
        bool "SAM4e8e (Duet Wifi/Eth)"
endchoice

config MCU
    string
    default "sam3x8e" if MACH_SAM3X8E
    default "sam4s8c" if MACH_SAM4S8C
    default "sam4e8e" if MACH_SAM4E8E

config CLOCK_FREQ
    int
    default 42000000 if MACH_SAM3X8E # 84000000/2
    default 15000000 if MACH_SAM4S8C # 120000000/8
    default 60000000 if MACH_SAM4E8E # 120000000/2

config USBSERIAL
    depends on MACH_SAM4S8C || MACH_SAM4E8E
    bool "Use USB for communication (instead of serial)"
    default y
config SERIAL
    depends on !USBSERIAL
    bool
    default y
config SERIAL_BAUD
    depends on SERIAL
    int "Baud rate for serial port"
    default 250000

endif
src: Rename source folders for atsam and atsamd architectures Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net> 2019-01-13 04:14:50 +03:00			`# Kconfig settings for Atmel SAM processors`
sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00
src: Rename source folders for atsam and atsamd architectures Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net> 2019-01-13 04:14:50 +03:00			`if MACH_ATSAM`
sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00
src: Rename source folders for atsam and atsamd architectures Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net> 2019-01-13 04:14:50 +03:00			`config ATSAM_SELECT`
sam3x8e: Add support for ADC pins Support analog-to-digital inputs. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-12-23 22:49:52 +03:00			`bool`
			`default y`
build: Allow boards to disable digital input/output support Allow the micro-controller code to be built without support for regular gpio pins. In this case, the code for endstops, steppers, and gpiocmds will be disabled. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2017-07-20 06:59:35 +03:00			`select HAVE_GPIO`
sam3x8e: Add support for ADC pins Support analog-to-digital inputs. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-12-23 22:49:52 +03:00			`select HAVE_GPIO_ADC`
sam3: Enable i2c on sam3x8e Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 03:54:52 +03:00			`select HAVE_GPIO_I2C`
sam3x8e: Add SPI support Signed-off-by: Petri Honkala <cruwaller@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-05-04 19:47:26 +03:00			`select HAVE_GPIO_SPI`
Kconfig: Rename HAVE_USER_INTERFACE to HAVE_GPIO_BITBANGING Rename the HAVE_USER_INTERFACE definition in preparation for other "bit banging" interfaces. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-08-27 18:09:47 +03:00			`select HAVE_GPIO_BITBANGING`
sam3x8e: Add support for ADC pins Support analog-to-digital inputs. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-12-23 22:49:52 +03:00
sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00			`config BOARD_DIRECTORY`
			`string`
src: Rename source folders for atsam and atsamd architectures Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net> 2019-01-13 04:14:50 +03:00			`default "atsam"`
sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00
sam3: Merge sam4e8e support into sam3 code Most of the peripherals on the sam4e8e are similar to the ones on the sam3x8e mcu. Merge the code together and use just one code directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 00:50:44 +03:00			`choice`
			`prompt "Processor model"`
			`config MACH_SAM3X8E`
			`bool "SAM3x8e (Arduino Due)"`
sam3: Add support for sam4s8c chips Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 04:31:23 +03:00			`config MACH_SAM4S8C`
			`bool "SAM4s8c (Duet Maestro)"`
sam3: Merge sam4e8e support into sam3 code Most of the peripherals on the sam4e8e are similar to the ones on the sam3x8e mcu. Merge the code together and use just one code directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 00:50:44 +03:00			`config MACH_SAM4E8E`
			`bool "SAM4e8e (Duet Wifi/Eth)"`
			`endchoice`

			`config MCU`
			`string`
			`default "sam3x8e" if MACH_SAM3X8E`
sam3: Add support for sam4s8c chips Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 04:31:23 +03:00			`default "sam4s8c" if MACH_SAM4S8C`
sam3: Merge sam4e8e support into sam3 code Most of the peripherals on the sam4e8e are similar to the ones on the sam3x8e mcu. Merge the code together and use just one code directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 00:50:44 +03:00			`default "sam4e8e" if MACH_SAM4E8E`

sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00			`config CLOCK_FREQ`
			`int`
sam3: Merge sam4e8e support into sam3 code Most of the peripherals on the sam4e8e are similar to the ones on the sam3x8e mcu. Merge the code together and use just one code directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 00:50:44 +03:00			`default 42000000 if MACH_SAM3X8E # 84000000/2`
sam3: Add support for sam4s8c chips Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 04:31:23 +03:00			`default 15000000 if MACH_SAM4S8C # 120000000/8`
sam3: Merge sam4e8e support into sam3 code Most of the peripherals on the sam4e8e are similar to the ones on the sam3x8e mcu. Merge the code together and use just one code directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-27 00:50:44 +03:00			`default 60000000 if MACH_SAM4E8E # 120000000/2`
sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00
sam3: Add USB support for the SAM4 "UDP" hardware Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-30 01:09:35 +03:00			`config USBSERIAL`
			`depends on MACH_SAM4S8C \|\| MACH_SAM4E8E`
			`bool "Use USB for communication (instead of serial)"`
			`default y`
sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00			`config SERIAL`
sam3: Add USB support for the SAM4 "UDP" hardware Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2018-12-30 01:09:35 +03:00			`depends on !USBSERIAL`
sam3x8e: Add initial support for Arduino Due boards This adds basic support for running on the Atmel SAM3x8e micro-controllers that are found in the Arudino Due boards. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> 2016-06-14 21:27:30 +03:00			`bool`
			`default y`
			`config SERIAL_BAUD`
			`depends on SERIAL`
			`int "Baud rate for serial port"`
			`default 250000`

			`endif`