882 lines
32 KiB
C
882 lines
32 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f1xx_hal_rcc_ex.c
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @version V1.1.1
|
||
|
|
* @date 12-May-2017
|
||
|
|
* @brief Extended RCC HAL module driver.
|
||
|
|
* This file provides firmware functions to manage the following
|
||
|
|
* functionalities RCC extension peripheral:
|
||
|
|
* + Extended Peripheral Control functions
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f1xx_hal.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef HAL_RCC_MODULE_ENABLED
|
||
|
|
|
||
|
|
/** @defgroup RCCEx RCCEx
|
||
|
|
* @brief RCC Extension HAL module driver.
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private typedef -----------------------------------------------------------*/
|
||
|
|
/* Private define ------------------------------------------------------------*/
|
||
|
|
/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private macro -------------------------------------------------------------*/
|
||
|
|
/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
/* Private function prototypes -----------------------------------------------*/
|
||
|
|
/* Private functions ---------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RCCEx_Exported_Functions_Group1 Peripheral Control functions
|
||
|
|
* @brief Extended Peripheral Control functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
===============================================================================
|
||
|
|
##### Extended Peripheral Control functions #####
|
||
|
|
===============================================================================
|
||
|
|
[..]
|
||
|
|
This subsection provides a set of functions allowing to control the RCC Clocks
|
||
|
|
frequencies.
|
||
|
|
[..]
|
||
|
|
(@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
|
||
|
|
select the RTC clock source; in this case the Backup domain will be reset in
|
||
|
|
order to modify the RTC Clock source, as consequence RTC registers (including
|
||
|
|
the backup registers) are set to their reset values.
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
|
||
|
|
* RCC_PeriphCLKInitTypeDef.
|
||
|
|
* @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
|
||
|
|
* contains the configuration information for the Extended Peripherals clocks(RTC clock).
|
||
|
|
*
|
||
|
|
* @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
|
||
|
|
* the RTC clock source; in this case the Backup domain will be reset in
|
||
|
|
* order to modify the RTC Clock source, as consequence RTC registers (including
|
||
|
|
* the backup registers) are set to their reset values.
|
||
|
|
*
|
||
|
|
* @note In case of STM32F105xC or STM32F107xC devices, PLLI2S will be enabled if requested on
|
||
|
|
* one of 2 I2S interfaces. When PLLI2S is enabled, you need to call HAL_RCCEx_DisablePLLI2S to
|
||
|
|
* manually disable it.
|
||
|
|
*
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
|
||
|
|
{
|
||
|
|
uint32_t tickstart = 0U, temp_reg = 0U;
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
uint32_t pllactive = 0U;
|
||
|
|
#endif /* STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
|
||
|
|
|
||
|
|
/*------------------------------- RTC/LCD Configuration ------------------------*/
|
||
|
|
if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
|
||
|
|
{
|
||
|
|
/* check for RTC Parameters used to output RTCCLK */
|
||
|
|
assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
|
||
|
|
|
||
|
|
FlagStatus pwrclkchanged = RESET;
|
||
|
|
|
||
|
|
/* As soon as function is called to change RTC clock source, activation of the
|
||
|
|
power domain is done. */
|
||
|
|
/* Requires to enable write access to Backup Domain of necessary */
|
||
|
|
if(__HAL_RCC_PWR_IS_CLK_DISABLED())
|
||
|
|
{
|
||
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
||
|
|
pwrclkchanged = SET;
|
||
|
|
}
|
||
|
|
|
||
|
|
if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
|
||
|
|
{
|
||
|
|
/* Enable write access to Backup domain */
|
||
|
|
SET_BIT(PWR->CR, PWR_CR_DBP);
|
||
|
|
|
||
|
|
/* Wait for Backup domain Write protection disable */
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
|
||
|
|
temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL);
|
||
|
|
if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
|
||
|
|
{
|
||
|
|
/* Store the content of BDCR register before the reset of Backup Domain */
|
||
|
|
temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
|
||
|
|
/* RTC Clock selection can be changed only if the Backup Domain is reset */
|
||
|
|
__HAL_RCC_BACKUPRESET_FORCE();
|
||
|
|
__HAL_RCC_BACKUPRESET_RELEASE();
|
||
|
|
/* Restore the Content of BDCR register */
|
||
|
|
RCC->BDCR = temp_reg;
|
||
|
|
|
||
|
|
/* Wait for LSERDY if LSE was enabled */
|
||
|
|
if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON))
|
||
|
|
{
|
||
|
|
/* Get Start Tick */
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till LSE is ready */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
__HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
|
||
|
|
|
||
|
|
/* Require to disable power clock if necessary */
|
||
|
|
if(pwrclkchanged == SET)
|
||
|
|
{
|
||
|
|
__HAL_RCC_PWR_CLK_DISABLE();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/*------------------------------ ADC clock Configuration ------------------*/
|
||
|
|
if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_ADCPLLCLK_DIV(PeriphClkInit->AdcClockSelection));
|
||
|
|
|
||
|
|
/* Configure the ADC clock source */
|
||
|
|
__HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection);
|
||
|
|
}
|
||
|
|
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
/*------------------------------ I2S2 Configuration ------------------------*/
|
||
|
|
if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection));
|
||
|
|
|
||
|
|
/* Configure the I2S2 clock source */
|
||
|
|
__HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*------------------------------ I2S3 Configuration ------------------------*/
|
||
|
|
if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_I2S3CLKSOURCE(PeriphClkInit->I2s3ClockSelection));
|
||
|
|
|
||
|
|
/* Configure the I2S3 clock source */
|
||
|
|
__HAL_RCC_I2S3_CONFIG(PeriphClkInit->I2s3ClockSelection);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*------------------------------ PLL I2S Configuration ----------------------*/
|
||
|
|
/* Check that PLLI2S need to be enabled */
|
||
|
|
if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S2SRC) || HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
|
||
|
|
{
|
||
|
|
/* Update flag to indicate that PLL I2S should be active */
|
||
|
|
pllactive = 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Check if PLL I2S need to be enabled */
|
||
|
|
if (pllactive == 1)
|
||
|
|
{
|
||
|
|
/* Enable PLL I2S only if not active */
|
||
|
|
if (HAL_IS_BIT_CLR(RCC->CR, RCC_CR_PLL3ON))
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_PLLI2S_MUL(PeriphClkInit->PLLI2S.PLLI2SMUL));
|
||
|
|
assert_param(IS_RCC_HSE_PREDIV2(PeriphClkInit->PLLI2S.HSEPrediv2Value));
|
||
|
|
|
||
|
|
/* Prediv2 can be written only when the PLL2 is disabled. */
|
||
|
|
/* Return an error only if new value is different from the programmed value */
|
||
|
|
if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL2ON) && \
|
||
|
|
(__HAL_RCC_HSE_GET_PREDIV2() != PeriphClkInit->PLLI2S.HSEPrediv2Value))
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Configure the HSE prediv2 factor --------------------------------*/
|
||
|
|
__HAL_RCC_HSE_PREDIV2_CONFIG(PeriphClkInit->PLLI2S.HSEPrediv2Value);
|
||
|
|
|
||
|
|
/* Configure the main PLLI2S multiplication factors. */
|
||
|
|
__HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SMUL);
|
||
|
|
|
||
|
|
/* Enable the main PLLI2S. */
|
||
|
|
__HAL_RCC_PLLI2S_ENABLE();
|
||
|
|
|
||
|
|
/* Get Start Tick*/
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till PLLI2S is ready */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Return an error only if user wants to change the PLLI2SMUL whereas PLLI2S is active */
|
||
|
|
if (READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL3MUL) != PeriphClkInit->PLLI2S.PLLI2SMUL)
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif /* STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
|
||
|
|
|| defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
|
||
|
|
|| defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
/*------------------------------ USB clock Configuration ------------------*/
|
||
|
|
if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_USBPLLCLK_DIV(PeriphClkInit->UsbClockSelection));
|
||
|
|
|
||
|
|
/* Configure the USB clock source */
|
||
|
|
__HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection);
|
||
|
|
}
|
||
|
|
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get the PeriphClkInit according to the internal
|
||
|
|
* RCC configuration registers.
|
||
|
|
* @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
|
||
|
|
* returns the configuration information for the Extended Peripherals clocks(RTC, I2S, ADC clocks).
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
|
||
|
|
{
|
||
|
|
uint32_t srcclk = 0U;
|
||
|
|
|
||
|
|
/* Set all possible values for the extended clock type parameter------------*/
|
||
|
|
PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC;
|
||
|
|
|
||
|
|
/* Get the RTC configuration -----------------------------------------------*/
|
||
|
|
srcclk = __HAL_RCC_GET_RTC_SOURCE();
|
||
|
|
/* Source clock is LSE or LSI*/
|
||
|
|
PeriphClkInit->RTCClockSelection = srcclk;
|
||
|
|
|
||
|
|
/* Get the ADC clock configuration -----------------------------------------*/
|
||
|
|
PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC;
|
||
|
|
PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE();
|
||
|
|
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
/* Get the I2S2 clock configuration -----------------------------------------*/
|
||
|
|
PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2;
|
||
|
|
PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE();
|
||
|
|
|
||
|
|
/* Get the I2S3 clock configuration -----------------------------------------*/
|
||
|
|
PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3;
|
||
|
|
PeriphClkInit->I2s3ClockSelection = __HAL_RCC_GET_I2S3_SOURCE();
|
||
|
|
|
||
|
|
#endif /* STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
/* Get the I2S2 clock configuration -----------------------------------------*/
|
||
|
|
PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2;
|
||
|
|
PeriphClkInit->I2s2ClockSelection = RCC_I2S2CLKSOURCE_SYSCLK;
|
||
|
|
|
||
|
|
/* Get the I2S3 clock configuration -----------------------------------------*/
|
||
|
|
PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3;
|
||
|
|
PeriphClkInit->I2s3ClockSelection = RCC_I2S3CLKSOURCE_SYSCLK;
|
||
|
|
|
||
|
|
#endif /* STM32F103xE || STM32F103xG */
|
||
|
|
|
||
|
|
#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
|
||
|
|
|| defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
|
||
|
|
|| defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
/* Get the USB clock configuration -----------------------------------------*/
|
||
|
|
PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB;
|
||
|
|
PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE();
|
||
|
|
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Returns the peripheral clock frequency
|
||
|
|
* @note Returns 0 if peripheral clock is unknown
|
||
|
|
* @param PeriphClk Peripheral clock identifier
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock
|
||
|
|
@if STM32F103xE
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
@endif
|
||
|
|
@if STM32F103xG
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
@endif
|
||
|
|
@if STM32F105xC
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
|
||
|
|
@endif
|
||
|
|
@if STM32F107xC
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
|
||
|
|
* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
|
||
|
|
@endif
|
||
|
|
@if STM32F102xx
|
||
|
|
* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
|
||
|
|
@endif
|
||
|
|
@if STM32F103xx
|
||
|
|
* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
|
||
|
|
@endif
|
||
|
|
* @retval Frequency in Hz (0: means that no available frequency for the peripheral)
|
||
|
|
*/
|
||
|
|
uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
|
||
|
|
{
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
const uint8_t aPLLMULFactorTable[14] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 13};
|
||
|
|
const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16};
|
||
|
|
|
||
|
|
uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U;
|
||
|
|
uint32_t pll2mul = 0U, pll3mul = 0U, prediv2 = 0U;
|
||
|
|
#endif /* STM32F105xC || STM32F107xC */
|
||
|
|
#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || \
|
||
|
|
defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
const uint8_t aPLLMULFactorTable[16] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16};
|
||
|
|
const uint8_t aPredivFactorTable[2] = {1, 2};
|
||
|
|
|
||
|
|
uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U;
|
||
|
|
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
|
||
|
|
uint32_t temp_reg = 0U, frequency = 0U;
|
||
|
|
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_PERIPHCLOCK(PeriphClk));
|
||
|
|
|
||
|
|
switch (PeriphClk)
|
||
|
|
{
|
||
|
|
#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
|
||
|
|
|| defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
|
||
|
|
|| defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
case RCC_PERIPHCLK_USB:
|
||
|
|
{
|
||
|
|
/* Get RCC configuration ------------------------------------------------------*/
|
||
|
|
temp_reg = RCC->CFGR;
|
||
|
|
|
||
|
|
/* Check if PLL is enabled */
|
||
|
|
if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLLON))
|
||
|
|
{
|
||
|
|
pllmul = aPLLMULFactorTable[(uint32_t)(temp_reg & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos];
|
||
|
|
if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2)
|
||
|
|
{
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
|
||
|
|
|| defined(STM32F100xE)
|
||
|
|
prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> RCC_CFGR2_PREDIV1_Pos];
|
||
|
|
#else
|
||
|
|
prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos];
|
||
|
|
#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
|
||
|
|
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
if(HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC))
|
||
|
|
{
|
||
|
|
/* PLL2 selected as Prediv1 source */
|
||
|
|
/* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */
|
||
|
|
prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1;
|
||
|
|
pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> RCC_CFGR2_PLL2MUL_Pos) + 2;
|
||
|
|
pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv1) * pllmul);
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
|
||
|
|
pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */
|
||
|
|
/* In this case need to divide pllclk by 2 */
|
||
|
|
if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> RCC_CFGR_PLLMULL_Pos])
|
||
|
|
{
|
||
|
|
pllclk = pllclk / 2;
|
||
|
|
}
|
||
|
|
#else
|
||
|
|
if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2)
|
||
|
|
{
|
||
|
|
/* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
|
||
|
|
pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul);
|
||
|
|
}
|
||
|
|
#endif /* STM32F105xC || STM32F107xC */
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
|
||
|
|
pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Calcul of the USB frequency*/
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
/* USBCLK = PLLVCO = (2 x PLLCLK) / USB prescaler */
|
||
|
|
if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL_DIV2)
|
||
|
|
{
|
||
|
|
/* Prescaler of 2 selected for USB */
|
||
|
|
frequency = pllclk;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Prescaler of 3 selected for USB */
|
||
|
|
frequency = (2 * pllclk) / 3;
|
||
|
|
}
|
||
|
|
#else
|
||
|
|
/* USBCLK = PLLCLK / USB prescaler */
|
||
|
|
if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL)
|
||
|
|
{
|
||
|
|
/* No prescaler selected for USB */
|
||
|
|
frequency = pllclk;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Prescaler of 1.5 selected for USB */
|
||
|
|
frequency = (pllclk * 2) / 3;
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
case RCC_PERIPHCLK_I2S2:
|
||
|
|
{
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
/* SYSCLK used as source clock for I2S2 */
|
||
|
|
frequency = HAL_RCC_GetSysClockFreq();
|
||
|
|
#else
|
||
|
|
if (__HAL_RCC_GET_I2S2_SOURCE() == RCC_I2S2CLKSOURCE_SYSCLK)
|
||
|
|
{
|
||
|
|
/* SYSCLK used as source clock for I2S2 */
|
||
|
|
frequency = HAL_RCC_GetSysClockFreq();
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Check if PLLI2S is enabled */
|
||
|
|
if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON))
|
||
|
|
{
|
||
|
|
/* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */
|
||
|
|
prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1;
|
||
|
|
pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2;
|
||
|
|
frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif /* STM32F103xE || STM32F103xG */
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
case RCC_PERIPHCLK_I2S3:
|
||
|
|
{
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
/* SYSCLK used as source clock for I2S3 */
|
||
|
|
frequency = HAL_RCC_GetSysClockFreq();
|
||
|
|
#else
|
||
|
|
if (__HAL_RCC_GET_I2S3_SOURCE() == RCC_I2S3CLKSOURCE_SYSCLK)
|
||
|
|
{
|
||
|
|
/* SYSCLK used as source clock for I2S3 */
|
||
|
|
frequency = HAL_RCC_GetSysClockFreq();
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Check if PLLI2S is enabled */
|
||
|
|
if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON))
|
||
|
|
{
|
||
|
|
/* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */
|
||
|
|
prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1;
|
||
|
|
pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2;
|
||
|
|
frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif /* STM32F103xE || STM32F103xG */
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
|
||
|
|
case RCC_PERIPHCLK_RTC:
|
||
|
|
{
|
||
|
|
/* Get RCC BDCR configuration ------------------------------------------------------*/
|
||
|
|
temp_reg = RCC->BDCR;
|
||
|
|
|
||
|
|
/* Check if LSE is ready if RTC clock selection is LSE */
|
||
|
|
if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSERDY)))
|
||
|
|
{
|
||
|
|
frequency = LSE_VALUE;
|
||
|
|
}
|
||
|
|
/* Check if LSI is ready if RTC clock selection is LSI */
|
||
|
|
else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)))
|
||
|
|
{
|
||
|
|
frequency = LSI_VALUE;
|
||
|
|
}
|
||
|
|
else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_HSE_DIV128) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)))
|
||
|
|
{
|
||
|
|
frequency = HSE_VALUE / 128U;
|
||
|
|
}
|
||
|
|
/* Clock not enabled for RTC*/
|
||
|
|
else
|
||
|
|
{
|
||
|
|
frequency = 0U;
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
case RCC_PERIPHCLK_ADC:
|
||
|
|
{
|
||
|
|
frequency = HAL_RCC_GetPCLK2Freq() / (((__HAL_RCC_GET_ADC_SOURCE() >> RCC_CFGR_ADCPRE_Pos) + 1) * 2);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
default:
|
||
|
|
{
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
return(frequency);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||
|
|
/** @defgroup RCCEx_Exported_Functions_Group2 PLLI2S Management function
|
||
|
|
* @brief PLLI2S Management functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
===============================================================================
|
||
|
|
##### Extended PLLI2S Management functions #####
|
||
|
|
===============================================================================
|
||
|
|
[..]
|
||
|
|
This subsection provides a set of functions allowing to control the PLLI2S
|
||
|
|
activation or deactivation
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable PLLI2S
|
||
|
|
* @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that
|
||
|
|
* contains the configuration information for the PLLI2S
|
||
|
|
* @note The PLLI2S configuration not modified if used by I2S2 or I2S3 Interface.
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit)
|
||
|
|
{
|
||
|
|
uint32_t tickstart = 0U;
|
||
|
|
|
||
|
|
/* Check that PLL I2S has not been already enabled by I2S2 or I2S3*/
|
||
|
|
if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_PLLI2S_MUL(PLLI2SInit->PLLI2SMUL));
|
||
|
|
assert_param(IS_RCC_HSE_PREDIV2(PLLI2SInit->HSEPrediv2Value));
|
||
|
|
|
||
|
|
/* Prediv2 can be written only when the PLL2 is disabled. */
|
||
|
|
/* Return an error only if new value is different from the programmed value */
|
||
|
|
if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL2ON) && \
|
||
|
|
(__HAL_RCC_HSE_GET_PREDIV2() != PLLI2SInit->HSEPrediv2Value))
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Disable the main PLLI2S. */
|
||
|
|
__HAL_RCC_PLLI2S_DISABLE();
|
||
|
|
|
||
|
|
/* Get Start Tick*/
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till PLLI2S is ready */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Configure the HSE prediv2 factor --------------------------------*/
|
||
|
|
__HAL_RCC_HSE_PREDIV2_CONFIG(PLLI2SInit->HSEPrediv2Value);
|
||
|
|
|
||
|
|
|
||
|
|
/* Configure the main PLLI2S multiplication factors. */
|
||
|
|
__HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SMUL);
|
||
|
|
|
||
|
|
/* Enable the main PLLI2S. */
|
||
|
|
__HAL_RCC_PLLI2S_ENABLE();
|
||
|
|
|
||
|
|
/* Get Start Tick*/
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till PLLI2S is ready */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* PLLI2S cannot be modified as already used by I2S2 or I2S3 */
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable PLLI2S
|
||
|
|
* @note PLLI2S is not disabled if used by I2S2 or I2S3 Interface.
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void)
|
||
|
|
{
|
||
|
|
uint32_t tickstart = 0U;
|
||
|
|
|
||
|
|
/* Disable PLL I2S as not requested by I2S2 or I2S3*/
|
||
|
|
if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
|
||
|
|
{
|
||
|
|
/* Disable the main PLLI2S. */
|
||
|
|
__HAL_RCC_PLLI2S_DISABLE();
|
||
|
|
|
||
|
|
/* Get Start Tick*/
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till PLLI2S is ready */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* PLLI2S is currently used by I2S2 or I2S3. Cannot be disabled.*/
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup RCCEx_Exported_Functions_Group3 PLL2 Management function
|
||
|
|
* @brief PLL2 Management functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
===============================================================================
|
||
|
|
##### Extended PLL2 Management functions #####
|
||
|
|
===============================================================================
|
||
|
|
[..]
|
||
|
|
This subsection provides a set of functions allowing to control the PLL2
|
||
|
|
activation or deactivation
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable PLL2
|
||
|
|
* @param PLL2Init pointer to an RCC_PLL2InitTypeDef structure that
|
||
|
|
* contains the configuration information for the PLL2
|
||
|
|
* @note The PLL2 configuration not modified if used indirectly as system clock.
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init)
|
||
|
|
{
|
||
|
|
uint32_t tickstart = 0U;
|
||
|
|
|
||
|
|
/* This bit can not be cleared if the PLL2 clock is used indirectly as system
|
||
|
|
clock (i.e. it is used as PLL clock entry that is used as system clock). */
|
||
|
|
if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \
|
||
|
|
(__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \
|
||
|
|
((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2))
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_RCC_PLL2_MUL(PLL2Init->PLL2MUL));
|
||
|
|
assert_param(IS_RCC_HSE_PREDIV2(PLL2Init->HSEPrediv2Value));
|
||
|
|
|
||
|
|
/* Prediv2 can be written only when the PLLI2S is disabled. */
|
||
|
|
/* Return an error only if new value is different from the programmed value */
|
||
|
|
if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL3ON) && \
|
||
|
|
(__HAL_RCC_HSE_GET_PREDIV2() != PLL2Init->HSEPrediv2Value))
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Disable the main PLL2. */
|
||
|
|
__HAL_RCC_PLL2_DISABLE();
|
||
|
|
|
||
|
|
/* Get Start Tick*/
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till PLL2 is disabled */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Configure the HSE prediv2 factor --------------------------------*/
|
||
|
|
__HAL_RCC_HSE_PREDIV2_CONFIG(PLL2Init->HSEPrediv2Value);
|
||
|
|
|
||
|
|
/* Configure the main PLL2 multiplication factors. */
|
||
|
|
__HAL_RCC_PLL2_CONFIG(PLL2Init->PLL2MUL);
|
||
|
|
|
||
|
|
/* Enable the main PLL2. */
|
||
|
|
__HAL_RCC_PLL2_ENABLE();
|
||
|
|
|
||
|
|
/* Get Start Tick*/
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till PLL2 is ready */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable PLL2
|
||
|
|
* @note PLL2 is not disabled if used indirectly as system clock.
|
||
|
|
* @retval HAL status
|
||
|
|
*/
|
||
|
|
HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void)
|
||
|
|
{
|
||
|
|
uint32_t tickstart = 0U;
|
||
|
|
|
||
|
|
/* This bit can not be cleared if the PLL2 clock is used indirectly as system
|
||
|
|
clock (i.e. it is used as PLL clock entry that is used as system clock). */
|
||
|
|
if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \
|
||
|
|
(__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \
|
||
|
|
((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2))
|
||
|
|
{
|
||
|
|
return HAL_ERROR;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Disable the main PLL2. */
|
||
|
|
__HAL_RCC_PLL2_DISABLE();
|
||
|
|
|
||
|
|
/* Get Start Tick*/
|
||
|
|
tickstart = HAL_GetTick();
|
||
|
|
|
||
|
|
/* Wait till PLL2 is disabled */
|
||
|
|
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
|
||
|
|
{
|
||
|
|
if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
|
||
|
|
{
|
||
|
|
return HAL_TIMEOUT;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
return HAL_OK;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
#endif /* STM32F105xC || STM32F107xC */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#endif /* HAL_RCC_MODULE_ENABLED */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||
|
|
|