klipper/klippy/extras/display/icons.py

# Common LCD icons
#
# Copyright (C) 2018  Aleph Objects, Inc <marcio@alephobjects.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.

extruder_icon = [
    0b0000000000000000,
    0b0000000000000000,
    0b0000111111110000,
    0b0001111111111000,
    0b0001111111111000,
    0b0001111111111000,
    0b0000111111110000,
    0b0000111111110000,
    0b0001111111111000,
    0b0001111111111000,
    0b0001111111111000,
    0b0000011111100000,
    0b0000001111000000,
    0b0000000110000000,
    0b0000000000000000,
    0b0000000000000000
]

bed_icon = [
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0000000000000000,
    0b0111111111111110,
    0b0111111111111110,
    0b0000000000000000,
    0b0000000000000000
]

bed_heat1_icon = [
    0b0000000000000000,
    0b0000000000000000,
    0b0010001000100000,
    0b0001000100010000,
    0b0000100010001000,
    0b0000100010001000,
    0b0001000100010000,
    0b0010001000100000,
    0b0010001000100000,
    0b0001000100010000,
    0b0000100010001000,
    0b0000000000000000,
    0b0111111111111110,
    0b0111111111111110,
    0b0000000000000000,
    0b0000000000000000
]

bed_heat2_icon = [
    0b0000000000000000,
    0b0000000000000000,
    0b0000100010001000,
    0b0000100010001000,
    0b0001000100010000,
    0b0010001000100000,
    0b0010001000100000,
    0b0001000100010000,
    0b0000100010001000,
    0b0000100010001000,
    0b0001000100010000,
    0b0000000000000000,
    0b0111111111111110,
    0b0111111111111110,
    0b0000000000000000,
    0b0000000000000000
]

fan1_icon = [
    0b0000000000000000,
    0b0111111111111110,
    0b0111000000001110,
    0b0110001111000110,
    0b0100001111000010,
    0b0100000110000010,
    0b0101100000011010,
    0b0101110110111010,
    0b0101100000011010,
    0b0100000110000010,
    0b0100001111000010,
    0b0110001111000110,
    0b0111000000001110,
    0b0111111111111110,
    0b0000000000000000,
    0b0000000000000000
]

fan2_icon = [
    0b0000000000000000,
    0b0111111111111110,
    0b0111000000001110,
    0b0110010000100110,
    0b0100111001110010,
    0b0101111001111010,
    0b0100110000110010,
    0b0100000110000010,
    0b0100110000110010,
    0b0101111001111010,
    0b0100111001110010,
    0b0110010000100110,
    0b0111000000001110,
    0b0111111111111110,
    0b0000000000000000,
    0b0000000000000000
]

feedrate_icon = [
    0b0000000000000000,
    0b0111111000000000,
    0b0100000000000000,
    0b0100000000000000,
    0b0100000000000000,
    0b0111111011111000,
    0b0100000010000100,
    0b0100000010000100,
    0b0100000010000100,
    0b0100000011111000,
    0b0000000010001000,
    0b0000000010000100,
    0b0000000010000100,
    0b0000000010000010,
    0b0000000000000000,
    0b0000000000000000
]

Icons16x16 = {
    'extruder': extruder_icon,
    'bed': bed_icon, 'bed_heat1': bed_heat1_icon, 'bed_heat2': bed_heat2_icon,
    'fan1': fan1_icon, 'fan2': fan2_icon,
    'feedrate': feedrate_icon,
}