147 lines
13 KiB
C
147 lines
13 KiB
C
|
/* ---------------------------------------------------------------------------- */
|
||
|
|
/* Atmel Microcontroller Software Support */
|
||
|
|
/* SAM Software Package License */
|
||
|
|
/* ---------------------------------------------------------------------------- */
|
||
|
|
/* Copyright (c) %copyright_year%, Atmel Corporation */
|
||
|
|
/* */
|
||
|
|
/* All rights reserved. */
|
||
|
|
/* */
|
||
|
|
/* Redistribution and use in source and binary forms, with or without */
|
||
|
|
/* modification, are permitted provided that the following condition is met: */
|
||
|
|
/* */
|
||
|
|
/* - Redistributions of source code must retain the above copyright notice, */
|
||
|
|
/* this list of conditions and the disclaimer below. */
|
||
|
|
/* */
|
||
|
|
/* Atmel's name may not be used to endorse or promote products derived from */
|
||
|
|
/* this software without specific prior written permission. */
|
||
|
|
/* */
|
||
|
|
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
|
||
|
|
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
|
||
|
|
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
|
||
|
|
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
|
||
|
|
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
|
||
|
|
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
|
||
|
|
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
|
||
|
|
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
|
||
|
|
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
|
||
|
|
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
|
||
|
|
/* ---------------------------------------------------------------------------- */
|
||
|
|
|
||
|
|
#ifndef _SAM4E_PIOB_INSTANCE_
|
||
|
|
#define _SAM4E_PIOB_INSTANCE_
|
||
|
|
|
||
|
|
/* ========== Register definition for PIOB peripheral ========== */
|
||
|
|
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
|
||
|
|
#define REG_PIOB_PER (0x400E1000U) /**< \brief (PIOB) PIO Enable Register */
|
||
|
|
#define REG_PIOB_PDR (0x400E1004U) /**< \brief (PIOB) PIO Disable Register */
|
||
|
|
#define REG_PIOB_PSR (0x400E1008U) /**< \brief (PIOB) PIO Status Register */
|
||
|
|
#define REG_PIOB_OER (0x400E1010U) /**< \brief (PIOB) Output Enable Register */
|
||
|
|
#define REG_PIOB_ODR (0x400E1014U) /**< \brief (PIOB) Output Disable Register */
|
||
|
|
#define REG_PIOB_OSR (0x400E1018U) /**< \brief (PIOB) Output Status Register */
|
||
|
|
#define REG_PIOB_IFER (0x400E1020U) /**< \brief (PIOB) Glitch Input Filter Enable Register */
|
||
|
|
#define REG_PIOB_IFDR (0x400E1024U) /**< \brief (PIOB) Glitch Input Filter Disable Register */
|
||
|
|
#define REG_PIOB_IFSR (0x400E1028U) /**< \brief (PIOB) Glitch Input Filter Status Register */
|
||
|
|
#define REG_PIOB_SODR (0x400E1030U) /**< \brief (PIOB) Set Output Data Register */
|
||
|
|
#define REG_PIOB_CODR (0x400E1034U) /**< \brief (PIOB) Clear Output Data Register */
|
||
|
|
#define REG_PIOB_ODSR (0x400E1038U) /**< \brief (PIOB) Output Data Status Register */
|
||
|
|
#define REG_PIOB_PDSR (0x400E103CU) /**< \brief (PIOB) Pin Data Status Register */
|
||
|
|
#define REG_PIOB_IER (0x400E1040U) /**< \brief (PIOB) Interrupt Enable Register */
|
||
|
|
#define REG_PIOB_IDR (0x400E1044U) /**< \brief (PIOB) Interrupt Disable Register */
|
||
|
|
#define REG_PIOB_IMR (0x400E1048U) /**< \brief (PIOB) Interrupt Mask Register */
|
||
|
|
#define REG_PIOB_ISR (0x400E104CU) /**< \brief (PIOB) Interrupt Status Register */
|
||
|
|
#define REG_PIOB_MDER (0x400E1050U) /**< \brief (PIOB) Multi-driver Enable Register */
|
||
|
|
#define REG_PIOB_MDDR (0x400E1054U) /**< \brief (PIOB) Multi-driver Disable Register */
|
||
|
|
#define REG_PIOB_MDSR (0x400E1058U) /**< \brief (PIOB) Multi-driver Status Register */
|
||
|
|
#define REG_PIOB_PUDR (0x400E1060U) /**< \brief (PIOB) Pull-up Disable Register */
|
||
|
|
#define REG_PIOB_PUER (0x400E1064U) /**< \brief (PIOB) Pull-up Enable Register */
|
||
|
|
#define REG_PIOB_PUSR (0x400E1068U) /**< \brief (PIOB) Pad Pull-up Status Register */
|
||
|
|
#define REG_PIOB_ABCDSR (0x400E1070U) /**< \brief (PIOB) Peripheral Select Register */
|
||
|
|
#define REG_PIOB_IFSCDR (0x400E1080U) /**< \brief (PIOB) Input Filter Slow Clock Disable Register */
|
||
|
|
#define REG_PIOB_IFSCER (0x400E1084U) /**< \brief (PIOB) Input Filter Slow Clock Enable Register */
|
||
|
|
#define REG_PIOB_IFSCSR (0x400E1088U) /**< \brief (PIOB) Input Filter Slow Clock Status Register */
|
||
|
|
#define REG_PIOB_SCDR (0x400E108CU) /**< \brief (PIOB) Slow Clock Divider Debouncing Register */
|
||
|
|
#define REG_PIOB_PPDDR (0x400E1090U) /**< \brief (PIOB) Pad Pull-down Disable Register */
|
||
|
|
#define REG_PIOB_PPDER (0x400E1094U) /**< \brief (PIOB) Pad Pull-down Enable Register */
|
||
|
|
#define REG_PIOB_PPDSR (0x400E1098U) /**< \brief (PIOB) Pad Pull-down Status Register */
|
||
|
|
#define REG_PIOB_OWER (0x400E10A0U) /**< \brief (PIOB) Output Write Enable */
|
||
|
|
#define REG_PIOB_OWDR (0x400E10A4U) /**< \brief (PIOB) Output Write Disable */
|
||
|
|
#define REG_PIOB_OWSR (0x400E10A8U) /**< \brief (PIOB) Output Write Status Register */
|
||
|
|
#define REG_PIOB_AIMER (0x400E10B0U) /**< \brief (PIOB) Additional Interrupt Modes Enable Register */
|
||
|
|
#define REG_PIOB_AIMDR (0x400E10B4U) /**< \brief (PIOB) Additional Interrupt Modes Disables Register */
|
||
|
|
#define REG_PIOB_AIMMR (0x400E10B8U) /**< \brief (PIOB) Additional Interrupt Modes Mask Register */
|
||
|
|
#define REG_PIOB_ESR (0x400E10C0U) /**< \brief (PIOB) Edge Select Register */
|
||
|
|
#define REG_PIOB_LSR (0x400E10C4U) /**< \brief (PIOB) Level Select Register */
|
||
|
|
#define REG_PIOB_ELSR (0x400E10C8U) /**< \brief (PIOB) Edge/Level Status Register */
|
||
|
|
#define REG_PIOB_FELLSR (0x400E10D0U) /**< \brief (PIOB) Falling Edge/Low Level Select Register */
|
||
|
|
#define REG_PIOB_REHLSR (0x400E10D4U) /**< \brief (PIOB) Rising Edge/ High Level Select Register */
|
||
|
|
#define REG_PIOB_FRLHSR (0x400E10D8U) /**< \brief (PIOB) Fall/Rise - Low/High Status Register */
|
||
|
|
#define REG_PIOB_LOCKSR (0x400E10E0U) /**< \brief (PIOB) Lock Status */
|
||
|
|
#define REG_PIOB_WPMR (0x400E10E4U) /**< \brief (PIOB) Write Protect Mode Register */
|
||
|
|
#define REG_PIOB_WPSR (0x400E10E8U) /**< \brief (PIOB) Write Protect Status Register */
|
||
|
|
#define REG_PIOB_SCHMITT (0x400E1100U) /**< \brief (PIOB) Schmitt Trigger Register */
|
||
|
|
#define REG_PIOB_DELAYR (0x400E1110U) /**< \brief (PIOB) IO Delay Register */
|
||
|
|
#define REG_PIOB_PCMR (0x400E1150U) /**< \brief (PIOB) Parallel Capture Mode Register */
|
||
|
|
#define REG_PIOB_PCIER (0x400E1154U) /**< \brief (PIOB) Parallel Capture Interrupt Enable Register */
|
||
|
|
#define REG_PIOB_PCIDR (0x400E1158U) /**< \brief (PIOB) Parallel Capture Interrupt Disable Register */
|
||
|
|
#define REG_PIOB_PCIMR (0x400E115CU) /**< \brief (PIOB) Parallel Capture Interrupt Mask Register */
|
||
|
|
#define REG_PIOB_PCISR (0x400E1160U) /**< \brief (PIOB) Parallel Capture Interrupt Status Register */
|
||
|
|
#define REG_PIOB_PCRHR (0x400E1164U) /**< \brief (PIOB) Parallel Capture Reception Holding Register */
|
||
|
|
#else
|
||
|
|
#define REG_PIOB_PER (*(WoReg*)0x400E1000U) /**< \brief (PIOB) PIO Enable Register */
|
||
|
|
#define REG_PIOB_PDR (*(WoReg*)0x400E1004U) /**< \brief (PIOB) PIO Disable Register */
|
||
|
|
#define REG_PIOB_PSR (*(RoReg*)0x400E1008U) /**< \brief (PIOB) PIO Status Register */
|
||
|
|
#define REG_PIOB_OER (*(WoReg*)0x400E1010U) /**< \brief (PIOB) Output Enable Register */
|
||
|
|
#define REG_PIOB_ODR (*(WoReg*)0x400E1014U) /**< \brief (PIOB) Output Disable Register */
|
||
|
|
#define REG_PIOB_OSR (*(RoReg*)0x400E1018U) /**< \brief (PIOB) Output Status Register */
|
||
|
|
#define REG_PIOB_IFER (*(WoReg*)0x400E1020U) /**< \brief (PIOB) Glitch Input Filter Enable Register */
|
||
|
|
#define REG_PIOB_IFDR (*(WoReg*)0x400E1024U) /**< \brief (PIOB) Glitch Input Filter Disable Register */
|
||
|
|
#define REG_PIOB_IFSR (*(RoReg*)0x400E1028U) /**< \brief (PIOB) Glitch Input Filter Status Register */
|
||
|
|
#define REG_PIOB_SODR (*(WoReg*)0x400E1030U) /**< \brief (PIOB) Set Output Data Register */
|
||
|
|
#define REG_PIOB_CODR (*(WoReg*)0x400E1034U) /**< \brief (PIOB) Clear Output Data Register */
|
||
|
|
#define REG_PIOB_ODSR (*(RwReg*)0x400E1038U) /**< \brief (PIOB) Output Data Status Register */
|
||
|
|
#define REG_PIOB_PDSR (*(RoReg*)0x400E103CU) /**< \brief (PIOB) Pin Data Status Register */
|
||
|
|
#define REG_PIOB_IER (*(WoReg*)0x400E1040U) /**< \brief (PIOB) Interrupt Enable Register */
|
||
|
|
#define REG_PIOB_IDR (*(WoReg*)0x400E1044U) /**< \brief (PIOB) Interrupt Disable Register */
|
||
|
|
#define REG_PIOB_IMR (*(RoReg*)0x400E1048U) /**< \brief (PIOB) Interrupt Mask Register */
|
||
|
|
#define REG_PIOB_ISR (*(RoReg*)0x400E104CU) /**< \brief (PIOB) Interrupt Status Register */
|
||
|
|
#define REG_PIOB_MDER (*(WoReg*)0x400E1050U) /**< \brief (PIOB) Multi-driver Enable Register */
|
||
|
|
#define REG_PIOB_MDDR (*(WoReg*)0x400E1054U) /**< \brief (PIOB) Multi-driver Disable Register */
|
||
|
|
#define REG_PIOB_MDSR (*(RoReg*)0x400E1058U) /**< \brief (PIOB) Multi-driver Status Register */
|
||
|
|
#define REG_PIOB_PUDR (*(WoReg*)0x400E1060U) /**< \brief (PIOB) Pull-up Disable Register */
|
||
|
|
#define REG_PIOB_PUER (*(WoReg*)0x400E1064U) /**< \brief (PIOB) Pull-up Enable Register */
|
||
|
|
#define REG_PIOB_PUSR (*(RoReg*)0x400E1068U) /**< \brief (PIOB) Pad Pull-up Status Register */
|
||
|
|
#define REG_PIOB_ABCDSR (*(RwReg*)0x400E1070U) /**< \brief (PIOB) Peripheral Select Register */
|
||
|
|
#define REG_PIOB_IFSCDR (*(WoReg*)0x400E1080U) /**< \brief (PIOB) Input Filter Slow Clock Disable Register */
|
||
|
|
#define REG_PIOB_IFSCER (*(WoReg*)0x400E1084U) /**< \brief (PIOB) Input Filter Slow Clock Enable Register */
|
||
|
|
#define REG_PIOB_IFSCSR (*(RoReg*)0x400E1088U) /**< \brief (PIOB) Input Filter Slow Clock Status Register */
|
||
|
|
#define REG_PIOB_SCDR (*(RwReg*)0x400E108CU) /**< \brief (PIOB) Slow Clock Divider Debouncing Register */
|
||
|
|
#define REG_PIOB_PPDDR (*(WoReg*)0x400E1090U) /**< \brief (PIOB) Pad Pull-down Disable Register */
|
||
|
|
#define REG_PIOB_PPDER (*(WoReg*)0x400E1094U) /**< \brief (PIOB) Pad Pull-down Enable Register */
|
||
|
|
#define REG_PIOB_PPDSR (*(RoReg*)0x400E1098U) /**< \brief (PIOB) Pad Pull-down Status Register */
|
||
|
|
#define REG_PIOB_OWER (*(WoReg*)0x400E10A0U) /**< \brief (PIOB) Output Write Enable */
|
||
|
|
#define REG_PIOB_OWDR (*(WoReg*)0x400E10A4U) /**< \brief (PIOB) Output Write Disable */
|
||
|
|
#define REG_PIOB_OWSR (*(RoReg*)0x400E10A8U) /**< \brief (PIOB) Output Write Status Register */
|
||
|
|
#define REG_PIOB_AIMER (*(WoReg*)0x400E10B0U) /**< \brief (PIOB) Additional Interrupt Modes Enable Register */
|
||
|
|
#define REG_PIOB_AIMDR (*(WoReg*)0x400E10B4U) /**< \brief (PIOB) Additional Interrupt Modes Disables Register */
|
||
|
|
#define REG_PIOB_AIMMR (*(RoReg*)0x400E10B8U) /**< \brief (PIOB) Additional Interrupt Modes Mask Register */
|
||
|
|
#define REG_PIOB_ESR (*(WoReg*)0x400E10C0U) /**< \brief (PIOB) Edge Select Register */
|
||
|
|
#define REG_PIOB_LSR (*(WoReg*)0x400E10C4U) /**< \brief (PIOB) Level Select Register */
|
||
|
|
#define REG_PIOB_ELSR (*(RoReg*)0x400E10C8U) /**< \brief (PIOB) Edge/Level Status Register */
|
||
|
|
#define REG_PIOB_FELLSR (*(WoReg*)0x400E10D0U) /**< \brief (PIOB) Falling Edge/Low Level Select Register */
|
||
|
|
#define REG_PIOB_REHLSR (*(WoReg*)0x400E10D4U) /**< \brief (PIOB) Rising Edge/ High Level Select Register */
|
||
|
|
#define REG_PIOB_FRLHSR (*(RoReg*)0x400E10D8U) /**< \brief (PIOB) Fall/Rise - Low/High Status Register */
|
||
|
|
#define REG_PIOB_LOCKSR (*(RoReg*)0x400E10E0U) /**< \brief (PIOB) Lock Status */
|
||
|
|
#define REG_PIOB_WPMR (*(RwReg*)0x400E10E4U) /**< \brief (PIOB) Write Protect Mode Register */
|
||
|
|
#define REG_PIOB_WPSR (*(RoReg*)0x400E10E8U) /**< \brief (PIOB) Write Protect Status Register */
|
||
|
|
#define REG_PIOB_SCHMITT (*(RwReg*)0x400E1100U) /**< \brief (PIOB) Schmitt Trigger Register */
|
||
|
|
#define REG_PIOB_DELAYR (*(RwReg*)0x400E1110U) /**< \brief (PIOB) IO Delay Register */
|
||
|
|
#define REG_PIOB_PCMR (*(RwReg*)0x400E1150U) /**< \brief (PIOB) Parallel Capture Mode Register */
|
||
|
|
#define REG_PIOB_PCIER (*(WoReg*)0x400E1154U) /**< \brief (PIOB) Parallel Capture Interrupt Enable Register */
|
||
|
|
#define REG_PIOB_PCIDR (*(WoReg*)0x400E1158U) /**< \brief (PIOB) Parallel Capture Interrupt Disable Register */
|
||
|
|
#define REG_PIOB_PCIMR (*(RoReg*)0x400E115CU) /**< \brief (PIOB) Parallel Capture Interrupt Mask Register */
|
||
|
|
#define REG_PIOB_PCISR (*(RoReg*)0x400E1160U) /**< \brief (PIOB) Parallel Capture Interrupt Status Register */
|
||
|
|
#define REG_PIOB_PCRHR (*(RoReg*)0x400E1164U) /**< \brief (PIOB) Parallel Capture Reception Holding Register */
|
||
|
|
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
|
||
|
|
|
||
|
|
#endif /* _SAM4E_PIOB_INSTANCE_ */
|