# German translations for OctoKlipper.
# Copyright (C) 2021 The OctoPrint Project
# This file is distributed under the same license as the OctoKlipper
# project.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2021.
#
msgid ""
msgstr ""
"Project-Id-Version: OctoKlipper 0.3.8.2\n"
"Report-Msgid-Bugs-To: i18n@octoprint.org\n"
"POT-Creation-Date: 2021-05-13 16:32+0200\n"
"PO-Revision-Date: 2021-05-13 17:32+0200\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language: de\n"
"Language-Team: de <LL@li.org>\n"
"Plural-Forms: nplurals=2; plural=(n != 1)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.9.0\n"

#: octoprint_klipper/__init__.py:87
msgid "Allows to config klipper"
msgstr "Erlaubt Klipper zu konfigurieren"

#: octoprint_klipper/__init__.py:95
msgid "Allows to use klipper macros"
msgstr "Erlaubt Makros zu benutzen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:4
msgid "Performance Graph"
msgstr "Performancediagramm"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:15
msgid "Fill Datasets"
msgstr "Fülle Flächen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:22
msgid "Select"
msgstr "Auswählen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:26
msgid "Analyze Log"
msgstr "Log analysieren"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:27
msgid "Close"
msgstr "Schließen"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:72
msgid "Assisted Bed Leveling"
msgstr "Unterstützte Druckbett-Nivellierung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:14
msgid "Home"
msgstr "Grundstellung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:42
msgid "Start"
msgstr "Start"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:43
msgid "Previous"
msgstr "Vorheriger"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:44
msgid "Next"
msgstr "Nächster"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:45
msgid "Stop"
msgstr "Stop"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:86
msgid "Coordinate Offset"
msgstr "Koordinaten Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:8
msgid "Set an offset for all future GCODE move commands in mm."
msgstr "Setze einen Versatz in mm für alle zukünftigen GCODE Bewegungskommandos"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:26
msgid "Add to existing offset"
msgstr "Hinzufügen zum existierenden Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:31
msgid "Set Offset"
msgstr "Setze Versatz"

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:4
msgid "Run - "
msgstr "Ausführen - "

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:27
msgid "OK"
msgstr "OK"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:79
msgid "PID Tuning"
msgstr "PID Abstimmung"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:8
msgid "Heater / Extruder Name (from config file)"
msgstr "Heizer / Extruder Name (von Konfigdatei)"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:12
msgid "name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:17
msgid "Target Temperature"
msgstr "Zieltemperatur"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:25
msgid "The result of the tuning cycle is reported in the message log."
msgstr "Die Ergebnisse der Abstimmung werden im Nachrichtenlog ausgegeben."

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:28
msgid "Start Tuning"
msgstr "Starte Abstimmung"

#: octoprint_klipper/templates/klipper_settings.jinja2:12
msgid "Serial Port"
msgstr "Serieller Port"

#: octoprint_klipper/templates/klipper_settings.jinja2:18
#: octoprint_klipper/templates/klipper_settings.jinja2:20
msgid "Replace Connection Panel"
msgstr "Ersetze Verbindungsmenu"

#: octoprint_klipper/templates/klipper_settings.jinja2:25
msgid "Show Short Messages"
msgstr "Zeige Kurzmeldungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:27
msgid "on NavBar"
msgstr "auf Nav-leiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:28
msgid "on SideBar"
msgstr "auf Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:32
#: octoprint_klipper/templates/klipper_settings.jinja2:34
msgid "Enable debug logging"
msgstr "Aktiviere Debugloging"

#: octoprint_klipper/templates/klipper_settings.jinja2:38
msgid "Klipper Config File"
msgstr "Klipper Konfigdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:44
msgid "Klipper Log File"
msgstr "Klipper Logdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:50
msgid "Configuration Reload Command"
msgstr "Konfiguration Neustart Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:69
msgid "Add macro button to:"
msgstr "Makroschaltfläche anzeigen:"

#: octoprint_klipper/templates/klipper_settings.jinja2:70
#: octoprint_klipper/templates/klipper_settings.jinja2:84
msgid "Klipper Tab"
msgstr "Klipper Reiter"

#: octoprint_klipper/templates/klipper_settings.jinja2:71
#: octoprint_klipper/templates/klipper_settings.jinja2:87
msgid "Sidebar"
msgstr "Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:77
msgid "Name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_settings.jinja2:96
msgid "Command"
msgstr "Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:109
msgid "Add Macro"
msgstr "Makro hinzufügen"

#: octoprint_klipper/templates/klipper_settings.jinja2:135
msgid "Probe Height"
msgstr "Sensor Messhöhe"

#: octoprint_klipper/templates/klipper_settings.jinja2:141
msgid "Z-height to probe at"
msgstr "Höhe bei der gemessen wird"

#: octoprint_klipper/templates/klipper_settings.jinja2:145
msgid "Probe Lift"
msgstr "Sensorhöhe bei Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:151
msgid "Lift Head by this amount before moving."
msgstr "Hebe Düsenkopf auf diese Höhe vor Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:155
msgid "Probe Feedrate Z"
msgstr "Geschwindigkeit Z"

#: octoprint_klipper/templates/klipper_settings.jinja2:164
msgid "Feedrate X/Y"
msgstr "Geschwindigkeit X/Y"

#: octoprint_klipper/templates/klipper_settings.jinja2:173
msgid "Probe Points"
msgstr "Messpunkte"

#: octoprint_klipper/templates/klipper_settings.jinja2:200
msgid "Add Point"
msgstr "Füge Messpunkt hinzu"

#: octoprint_klipper/templates/klipper_settings.jinja2:212
#: octoprint_klipper/templates/klipper_settings.jinja2:213
msgid "Reload last changes"
msgstr "Lade letzte Änderung"

#: octoprint_klipper/templates/klipper_settings.jinja2:216
#: octoprint_klipper/templates/klipper_settings.jinja2:217
msgid "Reload from file"
msgstr "Neuladen von Datei"

#: octoprint_klipper/templates/klipper_settings.jinja2:219
msgid "Check parsing on save"
msgstr "Prüfe Syntax beim speichern"

#: octoprint_klipper/templates/klipper_settings.jinja2:221
msgid "Decrease Fontsize"
msgstr "Verringere Schriftgröße"

#: octoprint_klipper/templates/klipper_settings.jinja2:222
msgid "Increase Fontsize"
msgstr "Vergrößere Schriftgröße"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:3
msgid "Printer Profile"
msgstr "Druckprofil"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:5
msgid "Connect"
msgstr "Verbinde"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:6
#: octoprint_klipper/templates/klipper_tab_main.jinja2:37
msgid "Open Klipper config"
msgstr "Öffne Klipper Konfig"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:16
#: octoprint_klipper/templates/klipper_tab_main.jinja2:99
msgid "Macros"
msgstr "Makros"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:3
msgid "Messages"
msgstr "Nachricht"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:16
msgid "Clear"
msgstr "Lösche"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:29
msgid "Get Status"
msgstr "Statusanfrage"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:44
msgid "Restart"
msgstr "Neustart"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:51
msgid "Host"
msgstr "Host"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:58
msgid "Firmware"
msgstr "Firmware"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:65
msgid "Tools"
msgstr "Tools"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:93
msgid "Analyze Klipper Log"
msgstr "Analysiere Klipperlog"