# German translations for OctoKlipper. # Copyright (C) 2021 The OctoPrint Project # This file is distributed under the same license as the OctoKlipper # project. # FIRST AUTHOR , 2021. # msgid "" msgstr "" "Project-Id-Version: OctoKlipper 0.3.8.2\n" "Report-Msgid-Bugs-To: i18n@octoprint.org\n" "POT-Creation-Date: 2021-09-07 18:44+0200\n" "PO-Revision-Date: 2021-05-13 17:32+0200\n" "Last-Translator: FULL NAME \n" "Language: de\n" "Language-Team: de \n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Generated-By: Babel 2.9.1\n" #: octoprint_klipper/__init__.py:98 msgid "Allows to config klipper" msgstr "Erlaubt Klipper zu konfigurieren" #: octoprint_klipper/__init__.py:106 msgid "Allows to use klipper macros" msgstr "Erlaubt Makros zu benutzen" #: octoprint_klipper/__init__.py:612 msgid "You are about to restart Klipper!" msgstr "Sie sind dabei Klipper neuzustarten!" #: octoprint_klipper/__init__.py:612 msgid "This will stop ongoing prints!" msgstr "Dies wird angehende Aufträge abbrechen!" #: octoprint_klipper/cfgUtils.py:95 msgid "File not found!" msgstr "Datei nicht gefunden!" #: octoprint_klipper/static/js/klipper_backup.js:126 #: octoprint_klipper/static/js/klipper_settings.js:95 #, python-format msgid "" "Failed to remove config %(name)s.

Please consult octoprint.log for " "details.

" msgstr "" "Konnte config %(name)s nicht löschen.

Bitte im octoprint.log " "nachsehen für weitere Details.

" #: octoprint_klipper/static/js/klipper_backup.js:129 #: octoprint_klipper/static/js/klipper_settings.js:98 msgid "Could not remove config" msgstr "Konnte Konfiguration nicht löschen" #: octoprint_klipper/static/js/klipper_backup.js:138 #, python-format msgid "You are about to delete backuped config file \"%(name)s\"." msgstr "Sie sind dabei die gesicherte Konfigurationsdatei \"%(name)s\" zu löschen." #: octoprint_klipper/static/js/klipper_backup.js:154 msgid "This will overwrite any file with the same name on the configpath." msgstr "" "Dies wird jede Datei mit dem gleichen Namen im Konfigurationsordner " "überschreiben." #: octoprint_klipper/static/js/klipper_backup.js:157 msgid "Are you sure you want to restore now?" msgstr "Sind sie sicher jetzt wiederherzustellen?" #: octoprint_klipper/static/js/klipper_backup.js:159 msgid "Proceed" msgstr "Weiter" #: octoprint_klipper/static/js/klipper_backup.js:184 #, python-format msgid "You are about to restore %(count)d backuped config files." msgstr "" "Sie sind dabei %(count)d gesicherte Konfigurationsdateien " "wiederherzustellen." #: octoprint_klipper/static/js/klipper_backup.js:199 #, python-format msgid "You are about to delete %(count)d backuped config files." msgstr "Sie sind dabei %(count)d gesicherte Konfigurationsdateien zu löschen." #: octoprint_klipper/static/js/klipper_backup.js:209 msgid "Restoring klipper config files" msgstr "Stelle Klipper Konfigdatei wieder her" #: octoprint_klipper/static/js/klipper_backup.js:211 #, python-format msgid "Restoring %(count)d backuped config files..." msgstr "Stelle %(count)d gesicherte Konfigurationsdateien wieder her." #: octoprint_klipper/static/js/klipper_backup.js:220 #, python-format msgid "Restored %(filename)s..." msgstr "%(filename)s wiederhergestellt..." #: octoprint_klipper/static/js/klipper_backup.js:231 #, python-format msgid "Restoring of %(filename)s failed, continuing..." msgstr "Wiederherstellung von Datei %(filename)s gescheitert, setze fort..." #: octoprint_klipper/static/js/klipper_backup.js:264 msgid "Deleting backup files" msgstr "Lösche gesicherte Dateien" #: octoprint_klipper/static/js/klipper_backup.js:265 #, python-format msgid "Deleting %(count)d backup files..." msgstr "Lösche %(count)d gesicherte Konfigurationsdateien..." #: octoprint_klipper/static/js/klipper_backup.js:273 #: octoprint_klipper/static/js/klipper_settings.js:154 #, python-format msgid "Deleted %(filename)s..." msgstr "%(filename)s gelöscht..." #: octoprint_klipper/static/js/klipper_backup.js:279 #: octoprint_klipper/static/js/klipper_settings.js:164 #, python-format msgid "Deleting of %(filename)s failed, continuing..." msgstr "Löschung von Datei %(filename)s gescheitert, setze fort... " #: octoprint_klipper/static/js/klipper_editor.js:65 msgid "Syntax OK" msgstr "Syntax ist ok." #: octoprint_klipper/static/js/klipper_editor.js:67 msgid "Syntax NOK" msgstr "Syntax ist nicht ok!" #: octoprint_klipper/static/js/klipper_editor.js:72 msgid "SyntaxCheck" msgstr "Syntaxprüfung" #: octoprint_klipper/static/js/klipper_editor.js:87 msgid "File saved." msgstr "Datei gespeichert." #: octoprint_klipper/static/js/klipper_editor.js:89 msgid "File not saved." msgstr "Datei nicht gespeichert." #: octoprint_klipper/static/js/klipper_editor.js:94 msgid "Save File" msgstr "Speichern" #: octoprint_klipper/static/js/klipper_editor.js:157 #: octoprint_klipper/static/js/klipper_editor.js:172 msgid "Reload File" msgstr "Datei neuladen" #: octoprint_klipper/static/js/klipper_settings.js:107 #, python-format msgid "You are about to delete config file \"%(name)s\"." msgstr "Sie sind dabei Konfigurationsdatei \"%(name)s\" zu löschen." #: octoprint_klipper/static/js/klipper_settings.js:134 #, python-format msgid "You are about to delete %(count)d config files." msgstr "Sie sind dabei %(count)d Konfigurationsdateien zu löschen." #: octoprint_klipper/static/js/klipper_settings.js:144 msgid "Deleting config files" msgstr "Lösche Konfigurationsdateien" #: octoprint_klipper/static/js/klipper_settings.js:145 #, python-format msgid "Deleting %(count)d config files..." msgstr "Lösche %(count)d Konfigurationsdateien..." #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:5 msgid "Backups" msgstr "Sicherungen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:17 #: octoprint_klipper/templates/klipper_settings.jinja2:239 msgid "Select all on this page" msgstr "Wähle alle auf dieser Seite aus" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:20 #: octoprint_klipper/templates/klipper_settings.jinja2:240 msgid "Select all" msgstr "Alles Auswählen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:25 #: octoprint_klipper/templates/klipper_settings.jinja2:242 msgid "Clear selection" msgstr "Auswahl zurücksetzen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:29 #: octoprint_klipper/templates/klipper_settings.jinja2:251 msgid "Refresh file list" msgstr "Aktualisiere Dateiliste" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:30 #: octoprint_klipper/templates/klipper_settings.jinja2:252 msgid "Refresh Files" msgstr "Aktualisieren" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:34 msgid "Restore selected" msgstr "Ausgewählte wiederherstellen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:36 #: octoprint_klipper/templates/klipper_settings.jinja2:255 msgid "Delete selected" msgstr "Ausgewählte löschen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:46 #: octoprint_klipper/templates/klipper_settings.jinja2:262 msgid "Sort by name" msgstr "Sortiere nach Name" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:47 #: octoprint_klipper/templates/klipper_settings.jinja2:263 msgid "ascending" msgstr "aufwärts" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:50 #: octoprint_klipper/templates/klipper_settings.jinja2:265 msgid "Sort by date" msgstr "Sortiere nach Datum" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:51 #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:55 #: octoprint_klipper/templates/klipper_settings.jinja2:266 #: octoprint_klipper/templates/klipper_settings.jinja2:269 msgid "descending" msgstr "abwärts" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:54 #: octoprint_klipper/templates/klipper_settings.jinja2:268 msgid "Sort by file size" msgstr "Sortie nach Dateigröße" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:65 #: octoprint_klipper/templates/klipper_settings.jinja2:100 #: octoprint_klipper/templates/klipper_settings.jinja2:279 msgid "Name" msgstr "Name" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:66 #: octoprint_klipper/templates/klipper_settings.jinja2:280 msgid "Size" msgstr "Größe" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:67 #: octoprint_klipper/templates/klipper_settings.jinja2:281 msgid "Action" msgstr "Aktion" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:78 #: octoprint_klipper/templates/klipper_settings.jinja2:293 msgid "Delete" msgstr "Löschen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:81 msgid "Restore" msgstr "Wiederherstellen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:84 #: octoprint_klipper/templates/klipper_settings.jinja2:296 msgid "Download" msgstr "Runterladen" #: octoprint_klipper/templates/klipper_backups_dialog.jinja2:87 msgid "Preview" msgstr "Vorschau" #: octoprint_klipper/templates/klipper_editor.jinja2:4 msgid "Editor" msgstr "Editor" #: octoprint_klipper/templates/klipper_editor.jinja2:11 msgid "Filename" msgstr "Dateiname" #: octoprint_klipper/templates/klipper_editor.jinja2:14 #: octoprint_klipper/templates/klipper_editor.jinja2:15 msgid "Save Config" msgstr "Speichere Konfig" #: octoprint_klipper/templates/klipper_editor.jinja2:17 #: octoprint_klipper/templates/klipper_editor.jinja2:18 msgid "Reload last version" msgstr "Lade letzte Version" #: octoprint_klipper/templates/klipper_editor.jinja2:20 #: octoprint_klipper/templates/klipper_editor.jinja2:21 msgid "Reload from file" msgstr "Datei neuladen" #: octoprint_klipper/templates/klipper_editor.jinja2:23 #: octoprint_klipper/templates/klipper_editor.jinja2:24 msgid "Check Syntax" msgstr "Syntax prüfen" #: octoprint_klipper/templates/klipper_editor.jinja2:28 msgid "Decrease Fontsize" msgstr "Verringere Schriftgröße" #: octoprint_klipper/templates/klipper_editor.jinja2:31 msgid "Increase Fontsize" msgstr "Vergrößere Schriftgröße" #: octoprint_klipper/templates/klipper_graph_dialog.jinja2:4 msgid "Performance Graph" msgstr "Performancediagramm" #: octoprint_klipper/templates/klipper_graph_dialog.jinja2:9 msgid "Click labels to hide/show dataset" msgstr "Auf Labels klicken zum verstecken/anzeigen" #: octoprint_klipper/templates/klipper_graph_dialog.jinja2:15 msgid "Fill Datasets" msgstr "Fülle Flächen" #: octoprint_klipper/templates/klipper_graph_dialog.jinja2:22 msgid "Select" msgstr "Auswählen" #: octoprint_klipper/templates/klipper_graph_dialog.jinja2:26 msgid "Analyze Log" msgstr "Log analysieren" #: octoprint_klipper/templates/klipper_graph_dialog.jinja2:27 msgid "Close" msgstr "Schließen" #: octoprint_klipper/templates/klipper_graph_dialog.jinja2:35 msgid "Depending on the size of the log file this might take a while." msgstr "Abhängig von der Größe der Logdatei kann es etwas dauern." #: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:4 #: octoprint_klipper/templates/klipper_tab_main.jinja2:55 msgid "Assisted Bed Leveling" msgstr "Unterstützte Druckbett-Nivellierung" #: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:14 msgid "Home" msgstr "Grundstellung" #: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:42 msgid "Start" msgstr "Start" #: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:43 msgid "Previous" msgstr "Vorheriger" #: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:44 msgid "Next" msgstr "Nächster" #: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:45 msgid "Stop" msgstr "Stop" #: octoprint_klipper/templates/klipper_navbar.jinja2:2 #: octoprint_klipper/templates/klipper_sidebar.jinja2:11 msgid "Go to OctoKlipper Tab" msgstr "Gehe zum OctoKlipper Reiter" #: octoprint_klipper/templates/klipper_offset_dialog.jinja2:4 #: octoprint_klipper/templates/klipper_tab_main.jinja2:63 msgid "Coordinate Offset" msgstr "Koordinaten Versatz" #: octoprint_klipper/templates/klipper_offset_dialog.jinja2:8 msgid "Set an offset for all future GCODE move commands in mm." msgstr "Setze einen Versatz in mm für alle zukünftigen GCODE Bewegungskommandos" #: octoprint_klipper/templates/klipper_offset_dialog.jinja2:26 msgid "Add to existing offset" msgstr "Hinzufügen zum existierenden Versatz" #: octoprint_klipper/templates/klipper_offset_dialog.jinja2:31 msgid "Set Offset" msgstr "Setze Versatz" #: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:4 msgid "Run - " msgstr "Ausführen - " #: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:27 msgid "OK" msgstr "OK" #: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:4 #: octoprint_klipper/templates/klipper_tab_main.jinja2:59 msgid "PID Tuning" msgstr "PID Abstimmung" #: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:8 msgid "Heater / Extruder Name (from config file)" msgstr "Heizer / Extruder Name (von Konfigdatei)" #: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:12 msgid "name" msgstr "Name" #: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:17 msgid "Target Temperature" msgstr "Zieltemperatur" #: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:25 msgid "The result of the tuning cycle is reported in the message log." msgstr "Die Ergebnisse der Abstimmung werden im Nachrichtenlog ausgegeben." #: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:28 msgid "Start Tuning" msgstr "Starte Abstimmung" #: octoprint_klipper/templates/klipper_settings.jinja2:3 msgid "Basic" msgstr "Haupteinstellungen" #: octoprint_klipper/templates/klipper_settings.jinja2:4 #: octoprint_klipper/templates/klipper_sidebar.jinja2:16 #: octoprint_klipper/templates/klipper_tab_main.jinja2:72 msgid "Macros" msgstr "Makros" #: octoprint_klipper/templates/klipper_settings.jinja2:5 msgid "Bed Leveling" msgstr "Druckbett-Nivellierung" #: octoprint_klipper/templates/klipper_settings.jinja2:6 msgid "Klipper Configuration" msgstr "Klipper Konfiguration" #: octoprint_klipper/templates/klipper_settings.jinja2:12 msgid "Serial Port" msgstr "Serieller Port" #: octoprint_klipper/templates/klipper_settings.jinja2:18 #: octoprint_klipper/templates/klipper_settings.jinja2:20 msgid "Replace Connection Panel" msgstr "Ersetze Verbindungsmenu" #: octoprint_klipper/templates/klipper_settings.jinja2:25 msgid "Show Short Messages" msgstr "Zeige Kurzmeldungen" #: octoprint_klipper/templates/klipper_settings.jinja2:27 #: octoprint_klipper/templates/klipper_settings.jinja2:28 msgid "on NavBar" msgstr "auf Nav-leiste" #: octoprint_klipper/templates/klipper_settings.jinja2:29 #: octoprint_klipper/templates/klipper_settings.jinja2:30 msgid "on SideBar" msgstr "auf Seitenleiste" #: octoprint_klipper/templates/klipper_settings.jinja2:34 #: octoprint_klipper/templates/klipper_settings.jinja2:36 msgid "Enable debug logging" msgstr "Aktiviere Debugloging" #: octoprint_klipper/templates/klipper_settings.jinja2:41 msgid "Config Editor" msgstr "Konfig Editor" #: octoprint_klipper/templates/klipper_settings.jinja2:43 #: octoprint_klipper/templates/klipper_settings.jinja2:44 msgid "Check parsing on save" msgstr "Prüfe Syntax beim speichern" #: octoprint_klipper/templates/klipper_settings.jinja2:46 #: octoprint_klipper/templates/klipper_settings.jinja2:48 msgid "Fontsize" msgstr "Fontgröße" #: octoprint_klipper/templates/klipper_settings.jinja2:53 msgid "Klipper Config Directory" msgstr "Klipper Konfig Pfad" #: octoprint_klipper/templates/klipper_settings.jinja2:59 msgid "Klipper Log File" msgstr "Klipper Logdatei" #: octoprint_klipper/templates/klipper_settings.jinja2:65 msgid "Configuration Reload Command" msgstr "Konfiguration Neustart Befehl" #: octoprint_klipper/templates/klipper_settings.jinja2:73 msgid "" "The command that is executed when the Klipper configuration changed and " "needs to be reloaded.
\n" " Set this to \"Manually\" if you don't want to immediately " "restart klipper." msgstr "" "Der Befehl der ausgeführt wird nachdem die Klipper Konfiguration
\n" "geändert wurde und neu geladen werden muss.
\n" "Auf \"Manually\" setzen wenn man nicht gleich Klipper neustarten möchte." #: octoprint_klipper/templates/klipper_settings.jinja2:79 msgid "Config Backup" msgstr "Konfig Sicherungen" #: octoprint_klipper/templates/klipper_settings.jinja2:81 #: octoprint_klipper/templates/klipper_settings.jinja2:82 msgid "Show Backups" msgstr "Zeige Sicherungen" #: octoprint_klipper/templates/klipper_settings.jinja2:92 msgid "Add macro button to:" msgstr "Makroschaltfläche anzeigen auf:" #: octoprint_klipper/templates/klipper_settings.jinja2:93 #: octoprint_klipper/templates/klipper_settings.jinja2:107 msgid "Klipper Tab" msgstr "Klipper Reiter" #: octoprint_klipper/templates/klipper_settings.jinja2:94 #: octoprint_klipper/templates/klipper_settings.jinja2:110 msgid "Sidebar" msgstr "Seitenleiste" #: octoprint_klipper/templates/klipper_settings.jinja2:119 msgid "Command" msgstr "Befehl" #: octoprint_klipper/templates/klipper_settings.jinja2:132 msgid "Add Macro" msgstr "Makro hinzufügen" #: octoprint_klipper/templates/klipper_settings.jinja2:137 msgid "" "To show a dialog that asks for parameters you can write your macro like " "in the following example:" msgstr "" "Um ein Dialog anzeigen zu lassen, welches nach Parametern fragt,
\n" "kann man ein Makro wie im nächsten Beispiel schreiben:" #: octoprint_klipper/templates/klipper_settings.jinja2:153 msgid "" "This feature assists in manually leveling you print bed by moving the " "head to the defined points in\n" " sequence.
\n" " If you use a piece of paper for leveling, set \"Probe Height\" " "to the paper thickness eg. \"0.1\"." msgstr "" "Diese Funktion hilft beim Einstellen des Druckbettes,
\n" "da es die angegebenen Punkte automatisch nacheinander anfährt.
\n" "Wenn man ein Papier zum messen nimmt, setzt man \"Messhöhe\"
\n" "auf die Papierstärke zBsp.: \"0.1\"." #: octoprint_klipper/templates/klipper_settings.jinja2:159 msgid "Probe Height" msgstr "Messhöhe" #: octoprint_klipper/templates/klipper_settings.jinja2:165 msgid "Z-height to probe at" msgstr "Höhe bei der gemessen wird" #: octoprint_klipper/templates/klipper_settings.jinja2:169 msgid "Probe Lift" msgstr "Höhe für Seitenbewegung" #: octoprint_klipper/templates/klipper_settings.jinja2:175 msgid "Lift Head by this amount before moving." msgstr "Hebe Druckkopf auf diese Höhe vor einer Seitenbewegung" #: octoprint_klipper/templates/klipper_settings.jinja2:179 msgid "Probe Feedrate Z" msgstr "Geschwindigkeit Z" #: octoprint_klipper/templates/klipper_settings.jinja2:188 msgid "Feedrate X/Y" msgstr "Geschwindigkeit X/Y" #: octoprint_klipper/templates/klipper_settings.jinja2:197 msgid "Probe Points" msgstr "Messpunkte" #: octoprint_klipper/templates/klipper_settings.jinja2:224 msgid "Add Point" msgstr "Füge Messpunkt hinzu" #: octoprint_klipper/templates/klipper_settings.jinja2:231 msgid "Config Files" msgstr "Konfig Dateien" #: octoprint_klipper/templates/klipper_settings.jinja2:245 msgid "Add new File" msgstr "Erstelle neue Datei" #: octoprint_klipper/templates/klipper_settings.jinja2:246 msgid "New File" msgstr "Neue Datei" #: octoprint_klipper/templates/klipper_settings.jinja2:248 msgid "Open last config" msgstr "Öffne letzte Konfig" #: octoprint_klipper/templates/klipper_settings.jinja2:249 #: octoprint_klipper/templates/klipper_tab_main.jinja2:33 msgid "Show Editor" msgstr "Öffne Editor" #: octoprint_klipper/templates/klipper_settings.jinja2:299 msgid "Edit" msgstr "Bearbeiten" #: octoprint_klipper/templates/klipper_settings.jinja2:328 msgid "Donate" msgstr "Spenden" #: octoprint_klipper/templates/klipper_sidebar.jinja2:3 msgid "Printer Profile" msgstr "Druckerprofil" #: octoprint_klipper/templates/klipper_sidebar.jinja2:5 msgid "Connect" msgstr "Verbinde" #: octoprint_klipper/templates/klipper_sidebar.jinja2:6 msgid "Open Editor" msgstr "Öffne Editor" #: octoprint_klipper/templates/klipper_tab_main.jinja2:3 msgid "Messages" msgstr "Nachricht" #: octoprint_klipper/templates/klipper_tab_main.jinja2:11 #: octoprint_klipper/templates/klipper_tab_main.jinja2:12 msgid "Clear Log" msgstr "Log löschen" #: octoprint_klipper/templates/klipper_tab_main.jinja2:21 msgid "Query Klipper for its current status" msgstr "Aktuellen Status von Klipper anfordern" #: octoprint_klipper/templates/klipper_tab_main.jinja2:22 msgid "Get Status" msgstr "Statusanfrage" #: octoprint_klipper/templates/klipper_tab_main.jinja2:26 msgid "Open the OctoKlipper Settings" msgstr "Öffne die OctoKlipper Einstellungen" #: octoprint_klipper/templates/klipper_tab_main.jinja2:27 msgid "Open OctoKlipper Settings" msgstr "Öffne OctoKlipper Einstellungen" #: octoprint_klipper/templates/klipper_tab_main.jinja2:31 msgid "Show the Editor" msgstr "Öffne Editor" #: octoprint_klipper/templates/klipper_tab_main.jinja2:39 msgid "Restart" msgstr "Neustart" #: octoprint_klipper/templates/klipper_tab_main.jinja2:41 msgid "" "This will cause the host software to reload its config and perform an " "internal reset" msgstr "Das wird die Konfigurationsdatei neuladen und die Hostsoftware neustarten" #: octoprint_klipper/templates/klipper_tab_main.jinja2:42 msgid "Host" msgstr "Host" #: octoprint_klipper/templates/klipper_tab_main.jinja2:45 msgid "" "Similar to a host restart, but also clears any error state from the " "micro-controller" msgstr "Wie der Host Neustart, aber zusätzlich wird die Firmware neugestartet" #: octoprint_klipper/templates/klipper_tab_main.jinja2:46 msgid "Firmware" msgstr "Firmware" #: octoprint_klipper/templates/klipper_tab_main.jinja2:52 msgid "Tools" msgstr "Tools" #: octoprint_klipper/templates/klipper_tab_main.jinja2:54 msgid "" "Assists in manually leveling your printbed by moving the head to a " "configurable set of positions in sequence." msgstr "" "Unterstützt beim manuellem Bettnivellieren,
\n" "da der Druckkopf nacheinander einstellbare Punkte anfährt." #: octoprint_klipper/templates/klipper_tab_main.jinja2:58 msgid "Determines optimal PID parameters by heat cycling the hotend/bed." msgstr "" "Findet optimale PID Parameter beim zyklischen Heizen des " "Druckkopfes/-bettes." #: octoprint_klipper/templates/klipper_tab_main.jinja2:62 msgid "Sets a offset for subsequent GCODE coordinates." msgstr "Setze einen Versatz für alle weiteren GCODE Koordinaten" #: octoprint_klipper/templates/klipper_tab_main.jinja2:66 msgid "" "Assists in debugging performance issues by analyzing the Klipper log " "files." msgstr "" "Unterstützt, mit dem analysieren des Klipperlogs, beim Suchen von " "Performanceproblemen." #: octoprint_klipper/templates/klipper_tab_main.jinja2:67 msgid "Analyze Klipper Log" msgstr "Analysiere Klipperlog" #~ msgid "Open the Klipper configuration file" #~ msgstr "Öffne Klipper Konfiguration"