{{ _('The command that is executed when the Klipper configuration changed and needs to be reloaded.
Set this to "Manually" if you don\'t want to immediately restart klipper.') }}
{{ _('Add macro button to:') }}
{{ _('Klipper Tab') }}
{{ _('Sidebar') }}
{{ _('Add Macro') }}
{{ _('To show a dialog that asks for parameters you can write your macro like in the following example:') }}
 
          PID_CALIBRATE
          HEATER={label:Heater, default:extruder, options:extruder|extruder1}
          TARGET={label:Target Temperature, unit:°C, default:190}
          WRITE_FILE={label:Write to File, default:0, options:0|1}
{{ _('This feature assists in manually leveling you print bed by moving the head to the defined points in sequence.
If you use a piece of paper for leveling, set "Probe Height" to the paper thickness eg. "0.1".') }}
mm
{{ _('Z-height to probe at') }}
mm
{{ _('Lift Head by this amount before moving.') }}
mm/min
mm/min
{{ _('Probe Points') }}
name
x(mm)
y(mm)
{{_ ('Add Point') }}

{{ _('Config Files') }}

{{ _('Name') }} {{ _('Size') }} {{ _('Action') }}
 |   | 
{{ _('Donate') }}