# German translations for OctoKlipper.
# Copyright (C) 2021 The OctoPrint Project
# This file is distributed under the same license as the OctoKlipper
# project.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2021.
#
msgid ""
msgstr ""
"Project-Id-Version: OctoKlipper 0.3.8.2\n"
"Report-Msgid-Bugs-To: i18n@octoprint.org\n"
"POT-Creation-Date: 2021-10-03 23:33+0200\n"
"PO-Revision-Date: 2021-05-13 17:32+0200\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language: de\n"
"Language-Team: de <LL@li.org>\n"
"Plural-Forms: nplurals=2; plural=(n != 1)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.9.1\n"

#: octoprint_klipper/__init__.py:93
msgid "Allows to config klipper"
msgstr "Erlaubt Klipper zu konfigurieren"

#: octoprint_klipper/__init__.py:101
msgid "Allows to use klipper macros"
msgstr "Erlaubt Makros zu benutzen"

#: octoprint_klipper/__init__.py:624
msgid "Restart Klipper"
msgstr "Neustart Klipper"

#: octoprint_klipper/__init__.py:625
msgid "You are about to restart Klipper!"
msgstr "Sie sind dabei Klipper neuzustarten!"

#: octoprint_klipper/__init__.py:625
msgid "This will stop ongoing prints!"
msgstr "Dies wird angehende Aufträge abbrechen!"

#: octoprint_klipper/cfgUtils.py:95
msgid "File not found!"
msgstr "Datei nicht gefunden!"

#: octoprint_klipper/static/js/klipper.js:259
msgid "All ongoing Prints will be stopped!"
msgstr "Alle laufende Drucke werden gestoppt!"

#: octoprint_klipper/static/js/klipper.js:262
msgid "Klipper restart?"
msgstr "Klipper neustarten?"

#: octoprint_klipper/static/js/klipper.js:264
#: octoprint_klipper/static/js/klipper_backup.js:159
msgid "Proceed"
msgstr "Weiter"

#: octoprint_klipper/static/js/klipper_backup.js:126
#: octoprint_klipper/static/js/klipper_settings.js:110
#, python-format
msgid ""
"Failed to remove config %(name)s.</p><p>Please consult octoprint.log for "
"details.</p>"
msgstr ""
"Konnte config %(name)s nicht löschen. </p><p> Bitte im octoprint.log "
"nachsehen für weitere Details.</p>"

#: octoprint_klipper/static/js/klipper_backup.js:129
#: octoprint_klipper/static/js/klipper_settings.js:113
msgid "Could not remove config"
msgstr "Konnte Konfiguration nicht löschen"

#: octoprint_klipper/static/js/klipper_backup.js:138
#, python-format
msgid "You are about to delete backuped config file \"%(name)s\"."
msgstr "Sie sind dabei die gesicherte Konfigurationsdatei \"%(name)s\" zu löschen."

#: octoprint_klipper/static/js/klipper_backup.js:154
msgid "This will overwrite any file with the same name on the configpath."
msgstr ""
"Dies wird jede Datei mit dem gleichen Namen im Konfigurationsordner "
"überschreiben."

#: octoprint_klipper/static/js/klipper_backup.js:157
msgid "Are you sure you want to restore now?"
msgstr "Sind sie sicher jetzt wiederherzustellen?"

#: octoprint_klipper/static/js/klipper_backup.js:184
#, python-format
msgid "You are about to restore %(count)d backuped config files."
msgstr ""
"Sie sind dabei %(count)d gesicherte Konfigurationsdateien "
"wiederherzustellen."

#: octoprint_klipper/static/js/klipper_backup.js:199
#, python-format
msgid "You are about to delete %(count)d backuped config files."
msgstr "Sie sind dabei %(count)d gesicherte Konfigurationsdateien zu löschen."

#: octoprint_klipper/static/js/klipper_backup.js:209
msgid "Restoring klipper config files"
msgstr "Stelle Klipper Konfigdatei wieder her"

#: octoprint_klipper/static/js/klipper_backup.js:211
#, python-format
msgid "Restoring %(count)d backuped config files..."
msgstr "Stelle %(count)d gesicherte Konfigurationsdateien wieder her."

#: octoprint_klipper/static/js/klipper_backup.js:220
#, python-format
msgid "Restored %(filename)s..."
msgstr "%(filename)s wiederhergestellt..."

#: octoprint_klipper/static/js/klipper_backup.js:231
#, python-format
msgid "Restoring of %(filename)s failed, continuing..."
msgstr "Wiederherstellung von Datei %(filename)s gescheitert, setze fort..."

#: octoprint_klipper/static/js/klipper_backup.js:264
msgid "Deleting backup files"
msgstr "Lösche gesicherte Dateien"

#: octoprint_klipper/static/js/klipper_backup.js:265
#, python-format
msgid "Deleting %(count)d backup files..."
msgstr "Lösche %(count)d gesicherte Konfigurationsdateien..."

#: octoprint_klipper/static/js/klipper_backup.js:273
#: octoprint_klipper/static/js/klipper_settings.js:169
#, python-format
msgid "Deleted %(filename)s..."
msgstr "%(filename)s gelöscht..."

#: octoprint_klipper/static/js/klipper_backup.js:279
#: octoprint_klipper/static/js/klipper_settings.js:179
#, python-format
msgid "Deleting of %(filename)s failed, continuing..."
msgstr "Löschung von Datei %(filename)s gescheitert, setze fort... "

#: octoprint_klipper/static/js/klipper_editor.js:65
msgid "Closing without saving"
msgstr "Schließen ohne zu Speichern?"

#: octoprint_klipper/static/js/klipper_editor.js:66
msgid "Your file seems to have changed."
msgstr "Datei scheint geändert worden zu sein."

#: octoprint_klipper/static/js/klipper_editor.js:68
msgid "Do you really want to close it?"
msgstr "Wollen sie wirklich schließen?"

#: octoprint_klipper/static/js/klipper_editor.js:69
#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:27
msgid "Close"
msgstr "Schließen"

#: octoprint_klipper/static/js/klipper_editor.js:69
msgid "Do not close"
msgstr "Nicht schließen"

#: octoprint_klipper/static/js/klipper_editor.js:69
msgid "Save & Close"
msgstr "Speichern & Schließen"

#: octoprint_klipper/static/js/klipper_editor.js:130
#: octoprint_klipper/static/js/klipper_editor.js:137
msgid "SyntaxCheck"
msgstr "Syntaxprüfung"

#: octoprint_klipper/static/js/klipper_editor.js:130
msgid "SyntaxCheck OK"
msgstr "Syntaxprüfung OK"

#: octoprint_klipper/static/js/klipper_editor.js:133
msgid "Syntax NOK"
msgstr "Syntax ist nicht ok!"

#: octoprint_klipper/static/js/klipper_editor.js:157
#: octoprint_klipper/static/js/klipper_editor.js:169
#: octoprint_klipper/templates/klipper_editor.jinja2:37
#: octoprint_klipper/templates/klipper_editor.jinja2:38
msgid "Save Config"
msgstr "Speichere Konfig"

#: octoprint_klipper/static/js/klipper_editor.js:157
msgid "File saved."
msgstr "Datei gespeichert."

#: octoprint_klipper/static/js/klipper_editor.js:167
msgid "File not saved!"
msgstr "Datei nicht gespeichert."

#: octoprint_klipper/static/js/klipper_editor.js:217
#: octoprint_klipper/static/js/klipper_editor.js:234
msgid "Reload File"
msgstr "Datei neuladen"

#: octoprint_klipper/static/js/klipper_editor.js:221
msgid "Reload Config"
msgstr "Datei neuladen"

#: octoprint_klipper/static/js/klipper_editor.js:221
msgid "File reloaded."
msgstr "Datei neugeladen."

#: octoprint_klipper/static/js/klipper_settings.js:122
#, python-format
msgid "You are about to delete config file \"%(name)s\"."
msgstr "Sie sind dabei Konfigurationsdatei \"%(name)s\" zu löschen."

#: octoprint_klipper/static/js/klipper_settings.js:149
#, python-format
msgid "You are about to delete %(count)d config files."
msgstr "Sie sind dabei %(count)d Konfigurationsdateien zu löschen."

#: octoprint_klipper/static/js/klipper_settings.js:159
msgid "Deleting config files"
msgstr "Lösche Konfigurationsdateien"

#: octoprint_klipper/static/js/klipper_settings.js:160
#, python-format
msgid "Deleting %(count)d config files..."
msgstr "Lösche %(count)d Konfigurationsdateien..."

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:5
msgid "Backups"
msgstr "Sicherungen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:17
#: octoprint_klipper/templates/klipper_settings.jinja2:246
msgid "Select all on this page"
msgstr "Wähle alle auf dieser Seite aus"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:20
#: octoprint_klipper/templates/klipper_settings.jinja2:247
msgid "Select all"
msgstr "Alles Auswählen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:25
#: octoprint_klipper/templates/klipper_settings.jinja2:249
msgid "Clear selection"
msgstr "Auswahl zurücksetzen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:29
#: octoprint_klipper/templates/klipper_settings.jinja2:258
msgid "Refresh file list"
msgstr "Aktualisiere Dateiliste"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:30
#: octoprint_klipper/templates/klipper_settings.jinja2:259
msgid "Refresh Files"
msgstr "Aktualisieren"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:34
msgid "Restore selected"
msgstr "Ausgewählte wiederherstellen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:36
#: octoprint_klipper/templates/klipper_settings.jinja2:262
msgid "Delete selected"
msgstr "Ausgewählte löschen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:46
#: octoprint_klipper/templates/klipper_settings.jinja2:269
msgid "Sort by name"
msgstr "Sortiere nach Name"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:47
#: octoprint_klipper/templates/klipper_settings.jinja2:270
msgid "ascending"
msgstr "aufwärts"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:50
#: octoprint_klipper/templates/klipper_settings.jinja2:272
msgid "Sort by date"
msgstr "Sortiere nach Datum"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:51
#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:55
#: octoprint_klipper/templates/klipper_settings.jinja2:273
#: octoprint_klipper/templates/klipper_settings.jinja2:276
msgid "descending"
msgstr "abwärts"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:54
#: octoprint_klipper/templates/klipper_settings.jinja2:275
msgid "Sort by file size"
msgstr "Sortie nach Dateigröße"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:65
#: octoprint_klipper/templates/klipper_settings.jinja2:107
#: octoprint_klipper/templates/klipper_settings.jinja2:286
msgid "Name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:66
#: octoprint_klipper/templates/klipper_settings.jinja2:287
msgid "Size"
msgstr "Größe"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:67
#: octoprint_klipper/templates/klipper_settings.jinja2:288
msgid "Action"
msgstr "Aktion"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:78
#: octoprint_klipper/templates/klipper_settings.jinja2:300
msgid "Delete"
msgstr "Löschen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:81
msgid "Restore"
msgstr "Wiederherstellen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:84
#: octoprint_klipper/templates/klipper_settings.jinja2:303
msgid "Download"
msgstr "Runterladen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:87
msgid "Preview"
msgstr "Vorschau"

#: octoprint_klipper/templates/klipper_editor.jinja2:6
msgid "Decrease Fontsize"
msgstr "Verringere Schriftgröße"

#: octoprint_klipper/templates/klipper_editor.jinja2:9
msgid "Increase Fontsize"
msgstr "Vergrößere Schriftgröße"

#: octoprint_klipper/templates/klipper_editor.jinja2:28
msgid "Filename"
msgstr "Dateiname"

#: octoprint_klipper/templates/klipper_editor.jinja2:31
#: octoprint_klipper/templates/klipper_editor.jinja2:32
msgid "Reload from file"
msgstr "Datei neuladen"

#: octoprint_klipper/templates/klipper_editor.jinja2:34
#: octoprint_klipper/templates/klipper_editor.jinja2:35
msgid "Check Syntax"
msgstr "Syntax prüfen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:4
msgid "Performance Graph"
msgstr "Performancediagramm"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:9
msgid "Click labels to hide/show dataset"
msgstr "Auf Labels klicken zum verstecken/anzeigen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:15
msgid "Fill Datasets"
msgstr "Fülle Flächen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:22
msgid "Select"
msgstr "Auswählen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:26
msgid "Analyze Log"
msgstr "Log analysieren"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:35
msgid "Depending on the size of the log file this might take a while."
msgstr "Abhängig von der Größe der Logdatei kann es etwas dauern."

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:55
msgid "Assisted Bed Leveling"
msgstr "Unterstützte Druckbett-Nivellierung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:14
msgid "Home"
msgstr "Grundstellung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:42
msgid "Start"
msgstr "Start"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:43
msgid "Previous"
msgstr "Vorheriger"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:44
msgid "Next"
msgstr "Nächster"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:45
msgid "Stop"
msgstr "Stop"

#: octoprint_klipper/templates/klipper_navbar.jinja2:2
#: octoprint_klipper/templates/klipper_sidebar.jinja2:11
msgid "Go to OctoKlipper Tab"
msgstr "Gehe zum OctoKlipper Reiter"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:63
msgid "Coordinate Offset"
msgstr "Koordinaten Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:8
msgid "Set an offset for all future GCODE move commands in mm."
msgstr "Setze einen Versatz in mm für alle zukünftigen GCODE Bewegungskommandos"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:26
msgid "Add to existing offset"
msgstr "Hinzufügen zum existierenden Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:31
msgid "Set Offset"
msgstr "Setze Versatz"

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:4
msgid "Run - "
msgstr "Ausführen - "

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:27
msgid "OK"
msgstr "OK"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:59
msgid "PID Tuning"
msgstr "PID Abstimmung"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:8
msgid "Heater / Extruder Name (from config file)"
msgstr "Heizer / Extruder Name (von Konfigdatei)"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:12
msgid "name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:17
msgid "Target Temperature"
msgstr "Zieltemperatur"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:25
msgid "The result of the tuning cycle is reported in the message log."
msgstr "Die Ergebnisse der Abstimmung werden im Nachrichtenlog ausgegeben."

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:28
msgid "Start Tuning"
msgstr "Starte Abstimmung"

#: octoprint_klipper/templates/klipper_settings.jinja2:3
msgid "Basic"
msgstr "Haupteinstellungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:4
#: octoprint_klipper/templates/klipper_sidebar.jinja2:16
#: octoprint_klipper/templates/klipper_tab_main.jinja2:72
msgid "Macros"
msgstr "Makros"

#: octoprint_klipper/templates/klipper_settings.jinja2:5
msgid "Bed Leveling"
msgstr "Druckbett-Nivellierung"

#: octoprint_klipper/templates/klipper_settings.jinja2:6
msgid "Klipper Configuration"
msgstr "Klipper Konfiguration"

#: octoprint_klipper/templates/klipper_settings.jinja2:12
msgid "Serial Port"
msgstr "Serieller Port"

#: octoprint_klipper/templates/klipper_settings.jinja2:18
#: octoprint_klipper/templates/klipper_settings.jinja2:20
msgid "Replace Connection Panel"
msgstr "Ersetze Verbindungsmenu"

#: octoprint_klipper/templates/klipper_settings.jinja2:25
msgid "Show Short Messages"
msgstr "Zeige Kurzmeldungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:27
#: octoprint_klipper/templates/klipper_settings.jinja2:28
msgid "on NavBar"
msgstr "auf Nav-leiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:29
#: octoprint_klipper/templates/klipper_settings.jinja2:30
msgid "on SideBar"
msgstr "auf Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:34
#: octoprint_klipper/templates/klipper_settings.jinja2:36
msgid "Enable debug logging"
msgstr "Aktiviere Debugloging"

#: octoprint_klipper/templates/klipper_settings.jinja2:41
msgid "Config Editor"
msgstr "Konfig Editor"

#: octoprint_klipper/templates/klipper_settings.jinja2:43
#: octoprint_klipper/templates/klipper_settings.jinja2:44
msgid "Check parsing on save"
msgstr "Prüfe Syntax beim speichern"

#: octoprint_klipper/templates/klipper_settings.jinja2:46
#: octoprint_klipper/templates/klipper_settings.jinja2:48
msgid "Fontsize"
msgstr "Fontgröße"

#: octoprint_klipper/templates/klipper_settings.jinja2:53
msgid "Klipper Config Directory"
msgstr "Klipper Konfig Pfad"

#: octoprint_klipper/templates/klipper_settings.jinja2:59
msgid ""
"The filename of the base config that Klipper is loading. (default is "
"printer.cfg)"
msgstr ""
"Der Dateiname der Haupt-Konfigurationsdatei, die Klipper läd.(Standard "
"ist printer.cfg)"

#: octoprint_klipper/templates/klipper_settings.jinja2:59
msgid "Klipper Base Config Filename"
msgstr "Klipper Haupt-Konfigurationsdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:65
msgid "Klipper Log File"
msgstr "Klipper Logdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:71
msgid "Configuration Reload Command"
msgstr "Konfiguration Neustart Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:78
msgid "The command that is executed if you want to restart klipper."
msgstr "Der Befehl, der ausgeführt wird, um Klipper neu zu starten."

#: octoprint_klipper/templates/klipper_settings.jinja2:80
#: octoprint_klipper/templates/klipper_settings.jinja2:81
msgid "Reload klipper on editor save?"
msgstr "Klipper neu starten nach speichern im Editor?"

#: octoprint_klipper/templates/klipper_settings.jinja2:86
msgid "Config Backup"
msgstr "Konfig Sicherungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:88
#: octoprint_klipper/templates/klipper_settings.jinja2:89
msgid "Show Backups"
msgstr "Zeige Sicherungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:99
msgid "Add macro button to:"
msgstr "Makroschaltfläche anzeigen auf:"

#: octoprint_klipper/templates/klipper_settings.jinja2:100
#: octoprint_klipper/templates/klipper_settings.jinja2:114
msgid "Klipper Tab"
msgstr "Klipper Reiter"

#: octoprint_klipper/templates/klipper_settings.jinja2:101
#: octoprint_klipper/templates/klipper_settings.jinja2:117
msgid "Sidebar"
msgstr "Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:126
msgid "Command"
msgstr "Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:139
msgid "Add Macro"
msgstr "Makro hinzufügen"

#: octoprint_klipper/templates/klipper_settings.jinja2:144
msgid ""
"To show a dialog that asks for parameters you can write your macro like "
"in the following example:"
msgstr ""
"Um ein Dialog anzeigen zu lassen, welches nach Parametern fragt, <br>\n"
"kann man ein Makro wie im nächsten Beispiel schreiben:"

#: octoprint_klipper/templates/klipper_settings.jinja2:160
msgid ""
"This feature assists in manually leveling you print bed by moving the "
"head to the defined points in\n"
"          sequence.<br />\n"
"          If you use a piece of paper for leveling, set \"Probe Height\" "
"to the paper thickness eg. \"0.1\"."
msgstr ""
"Diese Funktion hilft beim Einstellen des Druckbettes, <br>\n"
"da es die angegebenen Punkte automatisch nacheinander anfährt.<br>\n"
"Wenn man ein Papier zum messen nimmt, setzt man \"Messhöhe\" <br>\n"
"auf die Papierstärke zBsp.: \"0.1\"."

#: octoprint_klipper/templates/klipper_settings.jinja2:166
msgid "Probe Height"
msgstr "Messhöhe"

#: octoprint_klipper/templates/klipper_settings.jinja2:172
msgid "Z-height to probe at"
msgstr "Höhe bei der gemessen wird"

#: octoprint_klipper/templates/klipper_settings.jinja2:176
msgid "Probe Lift"
msgstr "Höhe für Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:182
msgid "Lift Head by this amount before moving."
msgstr "Hebe Druckkopf auf diese Höhe vor einer Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:186
msgid "Probe Feedrate Z"
msgstr "Geschwindigkeit Z"

#: octoprint_klipper/templates/klipper_settings.jinja2:195
msgid "Feedrate X/Y"
msgstr "Geschwindigkeit X/Y"

#: octoprint_klipper/templates/klipper_settings.jinja2:204
msgid "Probe Points"
msgstr "Messpunkte"

#: octoprint_klipper/templates/klipper_settings.jinja2:231
msgid "Add Point"
msgstr "Füge Messpunkt hinzu"

#: octoprint_klipper/templates/klipper_settings.jinja2:238
msgid "Config Files"
msgstr "Konfig Dateien"

#: octoprint_klipper/templates/klipper_settings.jinja2:252
msgid "Add new File"
msgstr "Erstelle neue Datei"

#: octoprint_klipper/templates/klipper_settings.jinja2:253
msgid "New File"
msgstr "Neue Datei"

#: octoprint_klipper/templates/klipper_settings.jinja2:255
msgid "Open last config"
msgstr "Öffne letzte Konfig"

#: octoprint_klipper/templates/klipper_settings.jinja2:256
#, fuzzy
msgid "Open last Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_settings.jinja2:306
msgid "Edit"
msgstr "Bearbeiten"

#: octoprint_klipper/templates/klipper_settings.jinja2:335
msgid "Donate"
msgstr "Spenden"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:3
msgid "Printer Profile"
msgstr "Druckerprofil"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:5
msgid "Connect"
msgstr "Verbinde"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:6
msgid "Open Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:3
msgid "Messages"
msgstr "Nachricht"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:11
#: octoprint_klipper/templates/klipper_tab_main.jinja2:12
msgid "Clear Log"
msgstr "Log löschen"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:21
msgid "Query Klipper for its current status"
msgstr "Aktuellen Status von Klipper anfordern"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:22
msgid "Get Status"
msgstr "Statusabfrage"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:26
msgid "Open the OctoKlipper Settings"
msgstr "Öffne die OctoKlipper Einstellungen"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:27
msgid "Open OctoKlipper Settings"
msgstr "Öffne OctoKlipper Einstellungen"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:31
msgid "Show the Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:33
msgid "Show Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:39
msgid "Restart"
msgstr "Neustart"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:41
msgid ""
"This will cause the host software to reload its config and perform an "
"internal reset"
msgstr "Das wird die Konfigurationsdatei neuladen und die Hostsoftware neu starten"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:42
msgid "Host"
msgstr "Host"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:45
msgid ""
"Similar to a host restart, but also clears any error state from the "
"micro-controller"
msgstr "Wie der Host Neustart, aber zusätzlich wird die Firmware neu gestartet"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:46
msgid "Firmware"
msgstr "Firmware"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:52
msgid "Tools"
msgstr "Tools"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:54
msgid ""
"Assists in manually leveling your printbed by moving the head to a "
"configurable set of positions in sequence."
msgstr ""
"Unterstützt beim manuellem Bettnivellieren, <br>\n"
"da der Druckkopf nacheinander einstellbare Punkte anfährt."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:58
msgid "Determines optimal PID parameters by heat cycling the hotend/bed."
msgstr ""
"Findet optimale PID Parameter beim zyklischen Heizen des "
"Druckkopfes/-bettes."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:62
msgid "Sets a offset for subsequent GCODE coordinates."
msgstr "Setze einen Versatz für alle weiteren GCODE Koordinaten"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:66
msgid ""
"Assists in debugging performance issues by analyzing the Klipper log "
"files."
msgstr ""
"Unterstützt, mit dem analysieren des Klipperlogs, beim Suchen von "
"Performanceproblemen."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:67
msgid "Analyze Klipper Log"
msgstr "Analysiere Klipperlog"