OctoprintKlipperPlugin/translations/de/LC_MESSAGES/messages.po

# German translations for OctoKlipper.
# Copyright (C) 2021 The OctoPrint Project
# This file is distributed under the same license as the OctoKlipper
# project.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2021.
#
msgid ""
msgstr ""
"Project-Id-Version: OctoKlipper 0.3.8.2\n"
"Report-Msgid-Bugs-To: i18n@octoprint.org\n"
"POT-Creation-Date: 2021-12-31 01:34+0100\n"
"PO-Revision-Date: 2021-05-13 17:32+0200\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language: de\n"
"Language-Team: de <LL@li.org>\n"
"Plural-Forms: nplurals=2; plural=(n != 1)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.9.1\n"

#: octoprint_klipper/__init__.py:94
msgid "Allows to config klipper"
msgstr "Erlaubt Klipper zu konfigurieren"

#: octoprint_klipper/__init__.py:102
msgid "Allows to use klipper macros"
msgstr "Erlaubt Makros zu benutzen"

#: octoprint_klipper/__init__.py:600
msgid "Restart Klipper"
msgstr "Klipper Neustart"

#: octoprint_klipper/__init__.py:601
msgid "You are about to restart Klipper!"
msgstr "Sie sind dabei Klipper neu zu starten!"

#: octoprint_klipper/__init__.py:601
msgid "This will stop ongoing prints!"
msgstr "Dies wird laufende Aufträge abbrechen!"

#: octoprint_klipper/cfgUtils.py:86
msgid "Error: Klipper config file not found at:"
msgstr "Fehler: Klipper Konfigurationsdatei nicht gefunden:"

#: octoprint_klipper/cfgUtils.py:89
msgid "IOError:"
msgstr "IOFehler"

#: octoprint_klipper/cfgUtils.py:96
msgid "Decode Error:"
msgstr "Dekodierungsfehler:"

#: octoprint_klipper/cfgUtils.py:100
msgid "Please convert your config files to utf-8!"
msgstr "Bitte die Konfigurationsdateien nach utf-8 konvertieren!"

#: octoprint_klipper/cfgUtils.py:102
msgid ""
"Or you can also paste your config \n"
"into the Editor and save it."
msgstr ""
"Sie können auch die Konfiguration \n"
"in den Editor einfügen und dann speichern."

#: octoprint_klipper/cfgUtils.py:109
msgid "File not found!"
msgstr "Datei nicht gefunden!"

#: octoprint_klipper/static/js/klipper.js:207
#: octoprint_klipper/templates/klipper_sidebar.jinja2:13
msgid "Go to OctoKlipper Tab"
msgstr "Gehe zum OctoKlipper Reiter"

#: octoprint_klipper/static/js/klipper.js:325
msgid "Restarted Klipper"
msgstr "Klipper neu gestartet"

#: octoprint_klipper/static/js/klipper.js:333
msgid "All ongoing Prints will be stopped!"
msgstr "Alle laufende Drucke werden gestoppt!"

#: octoprint_klipper/static/js/klipper.js:338
msgid "Restart Klipper?"
msgstr "Klipper neu starten?"

#: octoprint_klipper/static/js/klipper.js:340
#: octoprint_klipper/templates/klipper_tab_main.jinja2:39
msgid "Restart"
msgstr "Neustart"

#: octoprint_klipper/static/js/klipper.js:340
msgid "Restart and don't ask this again."
msgstr "Neu starten und dies nicht wieder nachfragen."

#: octoprint_klipper/static/js/klipper.js:374
msgid "Copied"
msgstr "Kopiert"

#: octoprint_klipper/static/js/klipper.js:380
#: octoprint_klipper/static/js/klipper.js:387
#: octoprint_klipper/templates/klipper_settings.jinja2:177
msgid "Copy to Clipboard"
msgstr "Kopiere in Zwischenablage"

#: octoprint_klipper/static/js/klipper.js:383
msgid "Error:"
msgstr "Fehler:"

#: octoprint_klipper/static/js/klipper_backup.js:126
#: octoprint_klipper/static/js/klipper_settings.js:134
#, python-format
msgid ""
"Failed to remove config %(name)s.</p><p>Please consult octoprint.log for "
"details.</p>"
msgstr ""
"Konnte config %(name)s nicht löschen. </p><p> Bitte im octoprint.log "
"nachsehen für weitere Details.</p>"

#: octoprint_klipper/static/js/klipper_backup.js:129
#: octoprint_klipper/static/js/klipper_settings.js:137
msgid "Could not remove config"
msgstr "Konnte Konfiguration nicht löschen"

#: octoprint_klipper/static/js/klipper_backup.js:138
#, python-format
msgid "You are about to delete backed config file \"%(name)s\"."
msgstr "Sie sind dabei die gesicherte Konfigurationsdatei \"%(name)s\" zu löschen."

#: octoprint_klipper/static/js/klipper_backup.js:154
msgid "This will overwrite any file with the same name on the configpath."
msgstr ""
"Dies wird jede Datei mit dem gleichen Namen im Konfigurationsordner "
"überschreiben."

#: octoprint_klipper/static/js/klipper_backup.js:157
msgid "Are you sure you want to restore now?"
msgstr "Sind sie sicher jetzt wiederherzustellen?"

#: octoprint_klipper/static/js/klipper_backup.js:159
#: octoprint_klipper/static/js/klipper_editor.js:173
msgid "Proceed"
msgstr "Weiter"

#: octoprint_klipper/static/js/klipper_backup.js:184
#, python-format
msgid "You are about to restore %(count)d backed config files."
msgstr ""
"Sie sind dabei %(count)d gesicherte Konfigurationsdateien "
"wiederherzustellen."

#: octoprint_klipper/static/js/klipper_backup.js:199
#, python-format
msgid "You are about to delete %(count)d backed config files."
msgstr "Sie sind dabei %(count)d gesicherte Konfigurationsdateien zu löschen."

#: octoprint_klipper/static/js/klipper_backup.js:209
msgid "Restoring klipper config files"
msgstr "Stelle Klipper Konfigdatei wieder her"

#: octoprint_klipper/static/js/klipper_backup.js:211
#, python-format
msgid "Restoring %(count)d backed config files..."
msgstr "Stelle %(count)d gesicherte Konfigurationsdateien wieder her."

#: octoprint_klipper/static/js/klipper_backup.js:220
#, python-format
msgid "Restored %(filename)s..."
msgstr "%(filename)s wiederhergestellt..."

#: octoprint_klipper/static/js/klipper_backup.js:231
#, python-format
msgid "Restoring of %(filename)s failed, continuing..."
msgstr "Wiederherstellung von Datei %(filename)s gescheitert, setze fort..."

#: octoprint_klipper/static/js/klipper_backup.js:264
msgid "Deleting backup files"
msgstr "Lösche gesicherte Dateien"

#: octoprint_klipper/static/js/klipper_backup.js:265
#, python-format
msgid "Deleting %(count)d backed files..."
msgstr "Lösche %(count)d gesicherte Konfigurationsdateien..."

#: octoprint_klipper/static/js/klipper_backup.js:273
#: octoprint_klipper/static/js/klipper_settings.js:193
#, python-format
msgid "Deleted %(filename)s..."
msgstr "%(filename)s gelöscht..."

#: octoprint_klipper/static/js/klipper_backup.js:279
#: octoprint_klipper/static/js/klipper_settings.js:203
#, python-format
msgid "Deleting of %(filename)s failed, continuing..."
msgstr "Löschung von Datei %(filename)s gescheitert, setze fort... "

#: octoprint_klipper/static/js/klipper_editor.js:79
msgid "Closing without saving"
msgstr "Schließen ohne zu Speichern?"

#: octoprint_klipper/static/js/klipper_editor.js:80
msgid "Your file seems to have changed."
msgstr "Datei scheint geändert worden zu sein."

#: octoprint_klipper/static/js/klipper_editor.js:82
msgid "Do you really want to close it?"
msgstr "Wollen sie wirklich schließen?"

#: octoprint_klipper/static/js/klipper_editor.js:83
#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:27
msgid "Close"
msgstr "Schließen"

#: octoprint_klipper/static/js/klipper_editor.js:83
msgid "Do not close"
msgstr "Nicht schließen"

#: octoprint_klipper/static/js/klipper_editor.js:83
#: octoprint_klipper/templates/klipper_editor.jinja2:38
msgid "Save & Close"
msgstr "Speichern & Schließen"

#: octoprint_klipper/static/js/klipper_editor.js:168
msgid "Reload Configfile after SAVE_CONFIG?"
msgstr "Konfiguration neuladen nach SAVE_CONFIG?"

#: octoprint_klipper/static/js/klipper_editor.js:171
msgid "Externally changed config"
msgstr "Extern geänderte Konfiguration"

#: octoprint_klipper/static/js/klipper_editor.js:183
msgid "Your configuration seems to be faulty."
msgstr "Ihre Konfiguration sieht fehlerhaft aus."

#: octoprint_klipper/static/js/klipper_editor.js:187
msgid "Save faulty Configuration?"
msgstr "Speichere fehlerhafte Konfiguration?"

#: octoprint_klipper/static/js/klipper_editor.js:189
msgid "Do not save!"
msgstr "Datei nicht speichern!"

#: octoprint_klipper/static/js/klipper_editor.js:190
msgid "Save anyway!"
msgstr "Speichere trotzdem!"

#: octoprint_klipper/static/js/klipper_editor.js:190
msgid "Save anyway and don't ask this again."
msgstr "Speichere trotzdem und dies nicht wieder nachfragen."

#: octoprint_klipper/static/js/klipper_editor.js:214
msgid "SyntaxCheck"
msgstr "Syntaxprüfung"

#: octoprint_klipper/static/js/klipper_editor.js:214
msgid "SyntaxCheck OK"
msgstr "Syntaxprüfung OK"

#: octoprint_klipper/static/js/klipper_editor.js:249
msgid "Faulty config not saved!"
msgstr "Fehlerhafte Datei nicht gespeichert!"

#: octoprint_klipper/static/js/klipper_editor.js:251
#: octoprint_klipper/static/js/klipper_editor.js:275
#: octoprint_klipper/static/js/klipper_editor.js:393
#: octoprint_klipper/static/js/klipper_editor.js:406
#: octoprint_klipper/templates/klipper_editor.jinja2:40
msgid "Save Config"
msgstr "Speichere Konfig"

#: octoprint_klipper/static/js/klipper_editor.js:273
#: octoprint_klipper/static/js/klipper_editor.js:349
msgid "No filename set"
msgstr "Dateiname nicht angegeben"

#: octoprint_klipper/static/js/klipper_editor.js:325
#: octoprint_klipper/static/js/klipper_editor.js:343
#: octoprint_klipper/static/js/klipper_editor.js:351
msgid "Reload File"
msgstr "Datei neuladen"

#: octoprint_klipper/static/js/klipper_editor.js:329
msgid "Reload Config"
msgstr "Datei neuladen"

#: octoprint_klipper/static/js/klipper_editor.js:329
msgid "File reloaded."
msgstr "Datei neugeladen."

#: octoprint_klipper/static/js/klipper_editor.js:393
msgid "File saved."
msgstr "Datei gespeichert."

#: octoprint_klipper/static/js/klipper_editor.js:404
msgid "File not saved!"
msgstr "Datei nicht gespeichert."

#: octoprint_klipper/static/js/klipper_settings.js:103
msgid "Path: "
msgstr "Pfad: "

#: octoprint_klipper/static/js/klipper_settings.js:146
#, python-format
msgid "You are about to delete config file \"%(name)s\"."
msgstr "Sie sind dabei Konfigurationsdatei \"%(name)s\" zu löschen."

#: octoprint_klipper/static/js/klipper_settings.js:173
#, python-format
msgid "You are about to delete %(count)d config files."
msgstr "Sie sind dabei %(count)d Konfigurationsdateien zu löschen."

#: octoprint_klipper/static/js/klipper_settings.js:183
msgid "Deleting config files"
msgstr "Lösche Konfigurationsdateien"

#: octoprint_klipper/static/js/klipper_settings.js:184
#, python-format
msgid "Deleting %(count)d config files..."
msgstr "Lösche %(count)d Konfigurationsdateien..."

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:5
msgid "Backups"
msgstr "Sicherungen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:17
#: octoprint_klipper/templates/klipper_settings.jinja2:272
msgid "Select all on this page"
msgstr "Wähle alle auf dieser Seite aus"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:20
#: octoprint_klipper/templates/klipper_settings.jinja2:273
msgid "Select all"
msgstr "Alles Auswählen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:25
#: octoprint_klipper/templates/klipper_settings.jinja2:275
msgid "Clear selection"
msgstr "Auswahl zurücksetzen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:29
#: octoprint_klipper/templates/klipper_settings.jinja2:284
msgid "Refresh file list"
msgstr "Aktualisiere Dateiliste"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:30
#: octoprint_klipper/templates/klipper_settings.jinja2:285
msgid "Refresh Files"
msgstr "Aktualisieren"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:34
msgid "Restore selected"
msgstr "Ausgewählte wiederherstellen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:36
#: octoprint_klipper/templates/klipper_settings.jinja2:288
msgid "Delete selected"
msgstr "Ausgewählte löschen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:46
#: octoprint_klipper/templates/klipper_settings.jinja2:296
msgid "Sort by name"
msgstr "Sortiere nach Name"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:47
#: octoprint_klipper/templates/klipper_settings.jinja2:297
msgid "ascending"
msgstr "aufsteigend"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:50
#: octoprint_klipper/templates/klipper_settings.jinja2:299
msgid "Sort by date"
msgstr "Sortiere nach Datum"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:51
#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:55
#: octoprint_klipper/templates/klipper_settings.jinja2:300
#: octoprint_klipper/templates/klipper_settings.jinja2:303
msgid "descending"
msgstr "absteigend"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:54
#: octoprint_klipper/templates/klipper_settings.jinja2:302
msgid "Sort by file size"
msgstr "Sortiere nach Dateigröße"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:65
#: octoprint_klipper/templates/klipper_settings.jinja2:130
#: octoprint_klipper/templates/klipper_settings.jinja2:314
msgid "Name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:66
#: octoprint_klipper/templates/klipper_settings.jinja2:315
msgid "Size"
msgstr "Größe"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:67
#: octoprint_klipper/templates/klipper_settings.jinja2:316
msgid "Action"
msgstr "Aktion"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:78
#: octoprint_klipper/templates/klipper_settings.jinja2:328
msgid "Delete"
msgstr "Löschen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:81
msgid "Restore"
msgstr "Wiederherstellen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:84
#: octoprint_klipper/templates/klipper_settings.jinja2:331
msgid "Download"
msgstr "Runterladen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:87
msgid "Preview"
msgstr "Vorschau"

#: octoprint_klipper/templates/klipper_editor.jinja2:6
msgid "Decrease Fontsize"
msgstr "Verringere Schriftgröße"

#: octoprint_klipper/templates/klipper_editor.jinja2:9
msgid "Increase Fontsize"
msgstr "Vergrößere Schriftgröße"

#: octoprint_klipper/templates/klipper_editor.jinja2:28
msgid "Filename"
msgstr "Dateiname"

#: octoprint_klipper/templates/klipper_editor.jinja2:31
#: octoprint_klipper/templates/klipper_editor.jinja2:32
msgid "Reload from file"
msgstr "Datei neuladen"

#: octoprint_klipper/templates/klipper_editor.jinja2:34
#: octoprint_klipper/templates/klipper_editor.jinja2:35
msgid "Check Syntax"
msgstr "Syntax prüfen"

#: octoprint_klipper/templates/klipper_editor.jinja2:37
msgid "Save Config and Close"
msgstr "Speichern und schließen"

#: octoprint_klipper/templates/klipper_editor.jinja2:41
msgid "Save"
msgstr "Speichern"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:4
msgid "Performance Graph"
msgstr "Performancediagramm"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:9
msgid "Click labels to hide/show dataset"
msgstr "Auf Labels klicken zum verstecken/anzeigen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:15
msgid "Fill Datasets"
msgstr "Fülle Flächen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:22
msgid "Select"
msgstr "Auswählen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:26
msgid "Analyze Log"
msgstr "Log analysieren"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:35
msgid "Depending on the size of the log file this might take a while."
msgstr "Abhängig von der Größe der Logdatei kann es etwas dauern."

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:55
msgid "Assisted Bed Leveling"
msgstr "Unterstützte Druckbett-Nivellierung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:14
msgid "Home"
msgstr "Grundstellung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:42
msgid "Start"
msgstr "Start"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:43
msgid "Previous"
msgstr "Vorheriger"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:44
msgid "Next"
msgstr "Nächster"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:45
msgid "Stop"
msgstr "Stop"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:63
msgid "Coordinate Offset"
msgstr "Koordinaten Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:8
msgid "Set an offset for all future GCODE move commands in mm."
msgstr "Setze einen Versatz in mm für alle zukünftigen GCODE Bewegungskommandos"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:26
msgid "Add to existing offset"
msgstr "Hinzufügen zum existierenden Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:31
msgid "Set Offset"
msgstr "Setze Versatz"

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:4
msgid "Run - "
msgstr "Ausführen - "

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:27
msgid "OK"
msgstr "OK"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:59
msgid "PID Tuning"
msgstr "PID Abstimmung"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:8
msgid "Heater / Extruder Name (from config file)"
msgstr "Heizer / Extruder Name (von Konfigdatei)"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:12
msgid "name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:17
msgid "Target Temperature"
msgstr "Zieltemperatur"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:25
msgid "The result of the tuning cycle is reported in the message log."
msgstr "Die Ergebnisse der Abstimmung werden im Nachrichtenlog ausgegeben."

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:28
msgid "Start Tuning"
msgstr "Starte Abstimmung"

#: octoprint_klipper/templates/klipper_settings.jinja2:3
msgid "Basic"
msgstr "Haupteinstellungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:4
#: octoprint_klipper/templates/klipper_sidebar.jinja2:20
#: octoprint_klipper/templates/klipper_tab_main.jinja2:72
msgid "Macros"
msgstr "Makros"

#: octoprint_klipper/templates/klipper_settings.jinja2:5
msgid "Bed Leveling"
msgstr "Druckbett-Nivellierung"

#: octoprint_klipper/templates/klipper_settings.jinja2:6
msgid "Klipper Configuration"
msgstr "Klipper Konfiguration"

#: octoprint_klipper/templates/klipper_settings.jinja2:12
msgid "Serial Port"
msgstr "Serieller Port"

#: octoprint_klipper/templates/klipper_settings.jinja2:18
#: octoprint_klipper/templates/klipper_settings.jinja2:20
msgid "Replace Connection Panel"
msgstr "Ersetze Verbindungsmenu"

#: octoprint_klipper/templates/klipper_settings.jinja2:25
#: octoprint_klipper/templates/klipper_settings.jinja2:27
msgid ""
"Hide 'Open Editor' Button\n"
"in the Connection Panel"
msgstr ""
"Verberge 'Öffne Editor' Schaltfläche\n"
"auf der Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:32
msgid "Show Short Messages"
msgstr "Zeige Kurzmeldungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:34
#: octoprint_klipper/templates/klipper_settings.jinja2:35
msgid "on NavBar"
msgstr "auf Nav-leiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:36
#: octoprint_klipper/templates/klipper_settings.jinja2:37
msgid "on SideBar"
msgstr "auf Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:41
#: octoprint_klipper/templates/klipper_settings.jinja2:43
msgid "Enable debug logging"
msgstr "Aktiviere Debugloging"

#: octoprint_klipper/templates/klipper_settings.jinja2:48
#: octoprint_klipper/templates/klipper_settings.jinja2:50
msgid "Hide Error PopUps"
msgstr "Verberge Fehler PopUps"

#: octoprint_klipper/templates/klipper_settings.jinja2:55
msgid "Config Editor"
msgstr "Konfig Editor"

#: octoprint_klipper/templates/klipper_settings.jinja2:57
#: octoprint_klipper/templates/klipper_settings.jinja2:58
msgid "Check parsing on save"
msgstr "Prüfe Syntax beim speichern"

#: octoprint_klipper/templates/klipper_settings.jinja2:60
#: octoprint_klipper/templates/klipper_settings.jinja2:62
msgid "Fontsize"
msgstr "Fontgröße"

#: octoprint_klipper/templates/klipper_settings.jinja2:67
msgid "Klipper Config Directory"
msgstr "Klipper Konfig Pfad"

#: octoprint_klipper/templates/klipper_settings.jinja2:73
msgid ""
"The filename of the base config that Klipper is loading. (default is "
"printer.cfg)"
msgstr ""
"Der Dateiname der Haupt-Konfigurationsdatei, die Klipper läd.(Standard "
"ist printer.cfg)"

#: octoprint_klipper/templates/klipper_settings.jinja2:73
msgid "Klipper Base Config Filename"
msgstr "Klipper Haupt-Konfigurationsdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:79
msgid "Klipper Log File"
msgstr "Klipper Logdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:85
msgid "Configuration Restart Command"
msgstr "Konfiguration Neustart Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:92
msgid "The command that is executed if you want to restart klipper."
msgstr "Der Befehl, der ausgeführt wird, um Klipper neu zu starten."

#: octoprint_klipper/templates/klipper_settings.jinja2:94
msgid "Restart klipper on editor save?"
msgstr "Klipper neu starten nach speichern im Editor?"

#: octoprint_klipper/templates/klipper_settings.jinja2:95
msgid "Restart Klipper on editor save?"
msgstr "Klipper neu starten nach speichern im Editor?"

#: octoprint_klipper/templates/klipper_settings.jinja2:97
msgid "Show Confirmation before restarting Klipper?"
msgstr "Zeige Bestätigung vor Klipper Neustart?"

#: octoprint_klipper/templates/klipper_settings.jinja2:98
msgid "Confirmation before restarting Klipper?"
msgstr "Bestätigung vor Klipper Neustart?"

#: octoprint_klipper/templates/klipper_settings.jinja2:103
msgid "Config Backup"
msgstr "Konfig Sicherungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:105
#: octoprint_klipper/templates/klipper_settings.jinja2:106
msgid "Show Backups"
msgstr "Zeige Sicherungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:115
msgid "These macros are only meant to be used in OctoPrint."
msgstr "Diese Makros sind nur für OctoPrint gedacht."

#: octoprint_klipper/templates/klipper_settings.jinja2:116
msgid "They are not the ones that can be defined in the printer.cfg."
msgstr "Es sind nicht die, die in der printer.cfg definiert werden können."

#: octoprint_klipper/templates/klipper_settings.jinja2:122
msgid "Add macro button to:"
msgstr "Zeige Makroschaltfläche auf:"

#: octoprint_klipper/templates/klipper_settings.jinja2:123
#: octoprint_klipper/templates/klipper_settings.jinja2:137
msgid "Klipper Tab"
msgstr "Klipper Reiter"

#: octoprint_klipper/templates/klipper_settings.jinja2:124
#: octoprint_klipper/templates/klipper_settings.jinja2:140
msgid "Sidebar"
msgstr "Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:149
#: octoprint_klipper/templates/klipper_settings.jinja2:171
msgid "Command"
msgstr "Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:162
msgid "Add Macro"
msgstr "Makro hinzufügen"

#: octoprint_klipper/templates/klipper_settings.jinja2:167
msgid ""
"To show a dialog that asks for parameters you can write your macro like "
"in the following example:"
msgstr ""
"Um ein Dialog anzeigen zu lassen, welches nach Parametern fragt, kann man"
" ein Makro wie im nächsten Beispiel schreiben:"

#: octoprint_klipper/templates/klipper_settings.jinja2:188
msgid ""
"This feature assists in manually leveling your print bed by moving the "
"head to the defined points in sequence.<br />If you use a piece of paper "
"for leveling, set \"Probe Height\" to the paper thickness eg. \"0.1\"."
msgstr ""
"Diese Funktion hilft beim Einstellen des Druckbettes, da es die "
"angegebenen Punkte automatisch nacheinander anfährt. <br />Wenn man ein "
"Papier zum messen nimmt, setzt man \"Messhöhe\" auf die Papierstärke "
"zBsp.: \"0.1\"."

#: octoprint_klipper/templates/klipper_settings.jinja2:192
msgid "Probe Height"
msgstr "Messhöhe"

#: octoprint_klipper/templates/klipper_settings.jinja2:198
msgid "Z-height to probe at"
msgstr "Höhe bei der gemessen wird"

#: octoprint_klipper/templates/klipper_settings.jinja2:202
msgid "Probe Lift"
msgstr "Höhe für Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:208
msgid "Lift Head by this amount before moving."
msgstr "Hebe Druckkopf auf diese Höhe vor einer Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:212
msgid "Probe Feedrate Z"
msgstr "Geschwindigkeit Z"

#: octoprint_klipper/templates/klipper_settings.jinja2:221
msgid "Feedrate X/Y"
msgstr "Geschwindigkeit X/Y"

#: octoprint_klipper/templates/klipper_settings.jinja2:230
msgid "Probe Points"
msgstr "Messpunkte"

#: octoprint_klipper/templates/klipper_settings.jinja2:257
msgid "Add Point"
msgstr "Füge Messpunkt hinzu"

#: octoprint_klipper/templates/klipper_settings.jinja2:264
msgid "Config Files"
msgstr "Konfig Dateien"

#: octoprint_klipper/templates/klipper_settings.jinja2:278
msgid "Add new File"
msgstr "Erstelle neue Datei"

#: octoprint_klipper/templates/klipper_settings.jinja2:279
msgid "New File"
msgstr "Neue Datei"

#: octoprint_klipper/templates/klipper_settings.jinja2:281
msgid "Open last config"
msgstr "Öffne letzte Konfig"

#: octoprint_klipper/templates/klipper_settings.jinja2:282
msgid "Open last Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_settings.jinja2:308
msgid "Path to the config files."
msgstr "Pfad zu den Konfigurationsdateien"

#: octoprint_klipper/templates/klipper_settings.jinja2:334
msgid "Edit"
msgstr "Bearbeiten"

#: octoprint_klipper/templates/klipper_settings.jinja2:363
msgid "Donate"
msgstr "Spenden"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:3
msgid "Printer Profile"
msgstr "Druckerprofil"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:5
msgid "Connect"
msgstr "Verbinde"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:7
msgid "Open Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:3
msgid "Messages"
msgstr "Nachricht"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:6
msgid "Open the OctoKlipper Settings"
msgstr "Öffne die OctoKlipper Einstellungen"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:16
#: octoprint_klipper/templates/klipper_tab_main.jinja2:17
msgid "Clear Log"
msgstr "Log löschen"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:26
msgid "Query Klipper for its current status"
msgstr "Aktuellen Status von Klipper anfordern"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:27
msgid "Get Status"
msgstr "Statusabfrage"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:31
msgid "Show the Editor"
msgstr "Öffne den Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:33
msgid "Show Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:41
msgid ""
"This will cause the host software to reload its config and perform an "
"internal reset"
msgstr "Das wird die Konfigurationsdatei neuladen und die Hostsoftware neu starten"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:42
msgid "Host"
msgstr "Host"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:45
msgid ""
"Similar to a host restart, but also clears any error state from the "
"micro-controller"
msgstr "Wie der Host Neustart, aber zusätzlich wird die Firmware neu gestartet"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:46
msgid "Firmware"
msgstr "Firmware"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:52
msgid "Tools"
msgstr "Tools"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:54
msgid ""
"Assists in manually leveling your printbed by moving the head to a "
"configurable set of positions in sequence."
msgstr ""
"Unterstützt beim manuellem Bettnivellieren, <br>\n"
"da der Druckkopf nacheinander einstellbare Punkte anfährt."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:58
msgid "Determines optimal PID parameters by heat cycling the hotend/bed."
msgstr ""
"Findet optimale PID Parameter beim zyklischen Heizen des "
"Druckkopfes/-bettes."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:62
msgid "Sets a offset for subsequent GCODE coordinates."
msgstr "Setze einen Versatz für alle weiteren GCODE Koordinaten"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:66
msgid ""
"Assists in debugging performance issues by analyzing the Klipper log "
"files."
msgstr ""
"Unterstützt, mit dem analysieren des Klipperlogs, beim Suchen von "
"Performanceproblemen."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:67
msgid "Analyze Klipper Log"
msgstr "Analysiere Klipperlog"