OctoprintKlipperPlugin/octoprint_klipper/translations/de/LC_MESSAGES/messages.po

# German translations for OctoKlipper.
# Copyright (C) 2021 The OctoPrint Project
# This file is distributed under the same license as the OctoKlipper
# project.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2021.
#
msgid ""
msgstr ""
"Project-Id-Version: OctoKlipper 0.3.8.2\n"
"Report-Msgid-Bugs-To: i18n@octoprint.org\n"
"POT-Creation-Date: 2021-11-12 17:52+0100\n"
"PO-Revision-Date: 2021-05-13 17:32+0200\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language: de\n"
"Language-Team: de <LL@li.org>\n"
"Plural-Forms: nplurals=2; plural=(n != 1)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.9.1\n"

#: octoprint_klipper/__init__.py:93
msgid "Allows to config klipper"
msgstr "Erlaubt Klipper zu konfigurieren"

#: octoprint_klipper/__init__.py:101
msgid "Allows to use klipper macros"
msgstr "Erlaubt Makros zu benutzen"

#: octoprint_klipper/__init__.py:597
msgid "Restart Klipper"
msgstr "Klipper Neustart"

#: octoprint_klipper/__init__.py:598
msgid "You are about to restart Klipper!"
msgstr "Sie sind dabei Klipper neu zu starten!"

#: octoprint_klipper/__init__.py:598
msgid "This will stop ongoing prints!"
msgstr "Dies wird laufende Aufträge abbrechen!"

#: octoprint_klipper/cfgUtils.py:86
msgid "Error: Klipper config file not found at:"
msgstr "Fehler: Klipper Konfigurationsdatei nicht gefunden:"

#: octoprint_klipper/cfgUtils.py:89
msgid "IOError:"
msgstr "IOFehler"

#: octoprint_klipper/cfgUtils.py:96
msgid "Decode Error:"
msgstr "Dekodierungsfehler:"

#: octoprint_klipper/cfgUtils.py:100
msgid "Please convert your config files to utf-8!"
msgstr "Bitte die Konfigurationsdateien nach utf-8 konvertieren!"

#: octoprint_klipper/cfgUtils.py:102
msgid ""
"Or you can also paste your config \n"
"into the Editor and save it."
msgstr ""
"Sie können auch die Konfiguration \n"
"in den Editor einfügen und dann speichern."

#: octoprint_klipper/cfgUtils.py:109
msgid "File not found!"
msgstr "Datei nicht gefunden!"

#: octoprint_klipper/static/js/klipper.js:172
#: octoprint_klipper/templates/klipper_sidebar.jinja2:11
msgid "Go to OctoKlipper Tab"
msgstr "Gehe zum OctoKlipper Reiter"

#: octoprint_klipper/static/js/klipper.js:290
msgid "Restarted Klipper"
msgstr "Klipper neu gestartet"

#: octoprint_klipper/static/js/klipper.js:298
msgid "All ongoing Prints will be stopped!"
msgstr "Alle laufende Drucke werden gestoppt!"

#: octoprint_klipper/static/js/klipper.js:303
msgid "Restart Klipper?"
msgstr "Klipper neu starten?"

#: octoprint_klipper/static/js/klipper.js:305
#: octoprint_klipper/templates/klipper_tab_main.jinja2:39
msgid "Restart"
msgstr "Neustart"

#: octoprint_klipper/static/js/klipper.js:305
msgid "Restart and don't ask this again."
msgstr "Neu starten und dies nicht wieder nachfragen."

#: octoprint_klipper/static/js/klipper_backup.js:110
#: octoprint_klipper/static/js/klipper_settings.js:119
#, python-format
msgid ""
"Failed to remove config %(name)s.</p><p>Please consult octoprint.log for "
"details.</p>"
msgstr ""
"Konnte config %(name)s nicht löschen. </p><p> Bitte im octoprint.log "
"nachsehen für weitere Details.</p>"

#: octoprint_klipper/static/js/klipper_backup.js:113
#: octoprint_klipper/static/js/klipper_settings.js:122
msgid "Could not remove config"
msgstr "Konnte Konfiguration nicht löschen"

#: octoprint_klipper/static/js/klipper_backup.js:122
#, python-format
msgid "You are about to delete backed config file \"%(name)s\"."
msgstr "Sie sind dabei die gesicherte Konfigurationsdatei \"%(name)s\" zu löschen."

#: octoprint_klipper/static/js/klipper_backup.js:138
msgid "This will overwrite any file with the same name on the configpath."
msgstr ""
"Dies wird jede Datei mit dem gleichen Namen im Konfigurationsordner "
"überschreiben."

#: octoprint_klipper/static/js/klipper_backup.js:141
msgid "Are you sure you want to restore now?"
msgstr "Sind sie sicher jetzt wiederherzustellen?"

#: octoprint_klipper/static/js/klipper_backup.js:143
#: octoprint_klipper/static/js/klipper_editor.js:158
msgid "Proceed"
msgstr "Weiter"

#: octoprint_klipper/static/js/klipper_backup.js:168
#, python-format
msgid "You are about to restore %(count)d backed config files."
msgstr ""
"Sie sind dabei %(count)d gesicherte Konfigurationsdateien "
"wiederherzustellen."

#: octoprint_klipper/static/js/klipper_backup.js:183
#, python-format
msgid "You are about to delete %(count)d backed config files."
msgstr "Sie sind dabei %(count)d gesicherte Konfigurationsdateien zu löschen."

#: octoprint_klipper/static/js/klipper_backup.js:193
msgid "Restoring klipper config files"
msgstr "Stelle Klipper Konfigdatei wieder her"

#: octoprint_klipper/static/js/klipper_backup.js:195
#, python-format
msgid "Restoring %(count)d backed config files..."
msgstr "Stelle %(count)d gesicherte Konfigurationsdateien wieder her."

#: octoprint_klipper/static/js/klipper_backup.js:204
#, python-format
msgid "Restored %(filename)s..."
msgstr "%(filename)s wiederhergestellt..."

#: octoprint_klipper/static/js/klipper_backup.js:215
#, python-format
msgid "Restoring of %(filename)s failed, continuing..."
msgstr "Wiederherstellung von Datei %(filename)s gescheitert, setze fort..."

#: octoprint_klipper/static/js/klipper_backup.js:248
msgid "Deleting backup files"
msgstr "Lösche gesicherte Dateien"

#: octoprint_klipper/static/js/klipper_backup.js:249
#, python-format
msgid "Deleting %(count)d backed files..."
msgstr "Lösche %(count)d gesicherte Konfigurationsdateien..."

#: octoprint_klipper/static/js/klipper_backup.js:257
#: octoprint_klipper/static/js/klipper_settings.js:178
#, python-format
msgid "Deleted %(filename)s..."
msgstr "%(filename)s gelöscht..."

#: octoprint_klipper/static/js/klipper_backup.js:263
#: octoprint_klipper/static/js/klipper_settings.js:188
#, python-format
msgid "Deleting of %(filename)s failed, continuing..."
msgstr "Löschung von Datei %(filename)s gescheitert, setze fort... "

#: octoprint_klipper/static/js/klipper_editor.js:68
msgid "Closing without saving"
msgstr "Schließen ohne zu Speichern?"

#: octoprint_klipper/static/js/klipper_editor.js:69
msgid "Your file seems to have changed."
msgstr "Datei scheint geändert worden zu sein."

#: octoprint_klipper/static/js/klipper_editor.js:71
msgid "Do you really want to close it?"
msgstr "Wollen sie wirklich schließen?"

#: octoprint_klipper/static/js/klipper_editor.js:72
#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:27
msgid "Close"
msgstr "Schließen"

#: octoprint_klipper/static/js/klipper_editor.js:72
msgid "Do not close"
msgstr "Nicht schließen"

#: octoprint_klipper/static/js/klipper_editor.js:72
#: octoprint_klipper/templates/klipper_editor.jinja2:38
msgid "Save & Close"
msgstr "Speichern & Schließen"

#: octoprint_klipper/static/js/klipper_editor.js:153
msgid "Reload Configfile after SAVE_CONFIG?"
msgstr "Konfiguration neuladen nach SAVE_CONFIG?"

#: octoprint_klipper/static/js/klipper_editor.js:156
msgid "Externally changed config"
msgstr "Extern geänderte Konfiguration"

#: octoprint_klipper/static/js/klipper_editor.js:168
msgid "Your configuration seems to be faulty."
msgstr "Ihre Konfiguration sieht fehlerhaft aus."

#: octoprint_klipper/static/js/klipper_editor.js:172
msgid "Save faulty Configuration?"
msgstr "Speichere fehlerhafte Konfiguration?"

#: octoprint_klipper/static/js/klipper_editor.js:174
msgid "Do not save!"
msgstr "Datei nicht speichern!"

#: octoprint_klipper/static/js/klipper_editor.js:175
msgid "Save anyway!"
msgstr "Speichere trotzdem!"

#: octoprint_klipper/static/js/klipper_editor.js:175
msgid "Save anyway and don't ask this again."
msgstr "Speichere trotzdem und dies nicht wieder nachfragen."

#: octoprint_klipper/static/js/klipper_editor.js:199
msgid "SyntaxCheck"
msgstr "Syntaxprüfung"

#: octoprint_klipper/static/js/klipper_editor.js:199
msgid "SyntaxCheck OK"
msgstr "Syntaxprüfung OK"

#: octoprint_klipper/static/js/klipper_editor.js:231
msgid "Faulty config not saved!"
msgstr "Fehlerhafte Datei nicht gespeichert!"

#: octoprint_klipper/static/js/klipper_editor.js:233
#: octoprint_klipper/static/js/klipper_editor.js:255
#: octoprint_klipper/static/js/klipper_editor.js:372
#: octoprint_klipper/static/js/klipper_editor.js:384
#: octoprint_klipper/templates/klipper_editor.jinja2:40
msgid "Save Config"
msgstr "Speichere Konfig"

#: octoprint_klipper/static/js/klipper_editor.js:253
#: octoprint_klipper/static/js/klipper_editor.js:329
msgid "No filename set"
msgstr "Dateiname nicht angegeben"

#: octoprint_klipper/static/js/klipper_editor.js:305
#: octoprint_klipper/static/js/klipper_editor.js:323
#: octoprint_klipper/static/js/klipper_editor.js:331
msgid "Reload File"
msgstr "Datei neuladen"

#: octoprint_klipper/static/js/klipper_editor.js:309
msgid "Reload Config"
msgstr "Datei neuladen"

#: octoprint_klipper/static/js/klipper_editor.js:309
msgid "File reloaded."
msgstr "Datei neugeladen."

#: octoprint_klipper/static/js/klipper_editor.js:372
msgid "File saved."
msgstr "Datei gespeichert."

#: octoprint_klipper/static/js/klipper_editor.js:382
msgid "File not saved!"
msgstr "Datei nicht gespeichert."

#: octoprint_klipper/static/js/klipper_settings.js:88
msgid "Path: "
msgstr "Pfad: "

#: octoprint_klipper/static/js/klipper_settings.js:131
#, python-format
msgid "You are about to delete config file \"%(name)s\"."
msgstr "Sie sind dabei Konfigurationsdatei \"%(name)s\" zu löschen."

#: octoprint_klipper/static/js/klipper_settings.js:158
#, python-format
msgid "You are about to delete %(count)d config files."
msgstr "Sie sind dabei %(count)d Konfigurationsdateien zu löschen."

#: octoprint_klipper/static/js/klipper_settings.js:168
msgid "Deleting config files"
msgstr "Lösche Konfigurationsdateien"

#: octoprint_klipper/static/js/klipper_settings.js:169
#, python-format
msgid "Deleting %(count)d config files..."
msgstr "Lösche %(count)d Konfigurationsdateien..."

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:5
msgid "Backups"
msgstr "Sicherungen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:17
#: octoprint_klipper/templates/klipper_settings.jinja2:253
msgid "Select all on this page"
msgstr "Wähle alle auf dieser Seite aus"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:20
#: octoprint_klipper/templates/klipper_settings.jinja2:254
msgid "Select all"
msgstr "Alles Auswählen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:25
#: octoprint_klipper/templates/klipper_settings.jinja2:256
msgid "Clear selection"
msgstr "Auswahl zurücksetzen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:29
#: octoprint_klipper/templates/klipper_settings.jinja2:265
msgid "Refresh file list"
msgstr "Aktualisiere Dateiliste"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:30
#: octoprint_klipper/templates/klipper_settings.jinja2:266
msgid "Refresh Files"
msgstr "Aktualisieren"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:34
msgid "Restore selected"
msgstr "Ausgewählte wiederherstellen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:36
#: octoprint_klipper/templates/klipper_settings.jinja2:269
msgid "Delete selected"
msgstr "Ausgewählte löschen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:46
#: octoprint_klipper/templates/klipper_settings.jinja2:277
msgid "Sort by name"
msgstr "Sortiere nach Name"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:47
#: octoprint_klipper/templates/klipper_settings.jinja2:278
msgid "ascending"
msgstr "aufsteigend"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:50
#: octoprint_klipper/templates/klipper_settings.jinja2:280
msgid "Sort by date"
msgstr "Sortiere nach Datum"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:51
#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:55
#: octoprint_klipper/templates/klipper_settings.jinja2:281
#: octoprint_klipper/templates/klipper_settings.jinja2:284
msgid "descending"
msgstr "absteigend"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:54
#: octoprint_klipper/templates/klipper_settings.jinja2:283
msgid "Sort by file size"
msgstr "Sortiere nach Dateigröße"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:65
#: octoprint_klipper/templates/klipper_settings.jinja2:116
#: octoprint_klipper/templates/klipper_settings.jinja2:295
msgid "Name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:66
#: octoprint_klipper/templates/klipper_settings.jinja2:296
msgid "Size"
msgstr "Größe"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:67
#: octoprint_klipper/templates/klipper_settings.jinja2:297
msgid "Action"
msgstr "Aktion"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:78
#: octoprint_klipper/templates/klipper_settings.jinja2:309
msgid "Delete"
msgstr "Löschen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:81
msgid "Restore"
msgstr "Wiederherstellen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:84
#: octoprint_klipper/templates/klipper_settings.jinja2:312
msgid "Download"
msgstr "Runterladen"

#: octoprint_klipper/templates/klipper_backups_dialog.jinja2:87
msgid "Preview"
msgstr "Vorschau"

#: octoprint_klipper/templates/klipper_editor.jinja2:6
msgid "Decrease Fontsize"
msgstr "Verringere Schriftgröße"

#: octoprint_klipper/templates/klipper_editor.jinja2:9
msgid "Increase Fontsize"
msgstr "Vergrößere Schriftgröße"

#: octoprint_klipper/templates/klipper_editor.jinja2:28
msgid "Filename"
msgstr "Dateiname"

#: octoprint_klipper/templates/klipper_editor.jinja2:31
#: octoprint_klipper/templates/klipper_editor.jinja2:32
msgid "Reload from file"
msgstr "Datei neuladen"

#: octoprint_klipper/templates/klipper_editor.jinja2:34
#: octoprint_klipper/templates/klipper_editor.jinja2:35
msgid "Check Syntax"
msgstr "Syntax prüfen"

#: octoprint_klipper/templates/klipper_editor.jinja2:37
msgid "Save Config and Close"
msgstr "Speichern und schließen"

#: octoprint_klipper/templates/klipper_editor.jinja2:41
msgid "Save"
msgstr "Speichern"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:4
msgid "Performance Graph"
msgstr "Performancediagramm"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:9
msgid "Click labels to hide/show dataset"
msgstr "Auf Labels klicken zum verstecken/anzeigen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:15
msgid "Fill Datasets"
msgstr "Fülle Flächen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:22
msgid "Select"
msgstr "Auswählen"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:26
msgid "Analyze Log"
msgstr "Log analysieren"

#: octoprint_klipper/templates/klipper_graph_dialog.jinja2:35
msgid "Depending on the size of the log file this might take a while."
msgstr "Abhängig von der Größe der Logdatei kann es etwas dauern."

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:55
msgid "Assisted Bed Leveling"
msgstr "Unterstützte Druckbett-Nivellierung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:14
msgid "Home"
msgstr "Grundstellung"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:42
msgid "Start"
msgstr "Start"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:43
msgid "Previous"
msgstr "Vorheriger"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:44
msgid "Next"
msgstr "Nächster"

#: octoprint_klipper/templates/klipper_leveling_dialog.jinja2:45
msgid "Stop"
msgstr "Stop"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:63
msgid "Coordinate Offset"
msgstr "Koordinaten Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:8
msgid "Set an offset for all future GCODE move commands in mm."
msgstr "Setze einen Versatz in mm für alle zukünftigen GCODE Bewegungskommandos"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:26
msgid "Add to existing offset"
msgstr "Hinzufügen zum existierenden Versatz"

#: octoprint_klipper/templates/klipper_offset_dialog.jinja2:31
msgid "Set Offset"
msgstr "Setze Versatz"

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:4
msgid "Run - "
msgstr "Ausführen - "

#: octoprint_klipper/templates/klipper_param_macro_dialog.jinja2:27
msgid "OK"
msgstr "OK"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:4
#: octoprint_klipper/templates/klipper_tab_main.jinja2:59
msgid "PID Tuning"
msgstr "PID Abstimmung"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:8
msgid "Heater / Extruder Name (from config file)"
msgstr "Heizer / Extruder Name (von Konfigdatei)"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:12
msgid "name"
msgstr "Name"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:17
msgid "Target Temperature"
msgstr "Zieltemperatur"

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:25
msgid "The result of the tuning cycle is reported in the message log."
msgstr "Die Ergebnisse der Abstimmung werden im Nachrichtenlog ausgegeben."

#: octoprint_klipper/templates/klipper_pid_tuning_dialog.jinja2:28
msgid "Start Tuning"
msgstr "Starte Abstimmung"

#: octoprint_klipper/templates/klipper_settings.jinja2:3
msgid "Basic"
msgstr "Haupteinstellungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:4
#: octoprint_klipper/templates/klipper_sidebar.jinja2:16
#: octoprint_klipper/templates/klipper_tab_main.jinja2:72
msgid "Macros"
msgstr "Makros"

#: octoprint_klipper/templates/klipper_settings.jinja2:5
msgid "Bed Leveling"
msgstr "Druckbett-Nivellierung"

#: octoprint_klipper/templates/klipper_settings.jinja2:6
msgid "Klipper Configuration"
msgstr "Klipper Konfiguration"

#: octoprint_klipper/templates/klipper_settings.jinja2:12
msgid "Serial Port"
msgstr "Serieller Port"

#: octoprint_klipper/templates/klipper_settings.jinja2:18
#: octoprint_klipper/templates/klipper_settings.jinja2:20
msgid "Replace Connection Panel"
msgstr "Ersetze Verbindungsmenu"

#: octoprint_klipper/templates/klipper_settings.jinja2:25
msgid "Show Short Messages"
msgstr "Zeige Kurzmeldungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:27
#: octoprint_klipper/templates/klipper_settings.jinja2:28
msgid "on NavBar"
msgstr "auf Nav-leiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:29
#: octoprint_klipper/templates/klipper_settings.jinja2:30
msgid "on SideBar"
msgstr "auf Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:34
#: octoprint_klipper/templates/klipper_settings.jinja2:36
msgid "Enable debug logging"
msgstr "Aktiviere Debugloging"

#: octoprint_klipper/templates/klipper_settings.jinja2:41
msgid "Config Editor"
msgstr "Konfig Editor"

#: octoprint_klipper/templates/klipper_settings.jinja2:43
#: octoprint_klipper/templates/klipper_settings.jinja2:44
msgid "Check parsing on save"
msgstr "Prüfe Syntax beim speichern"

#: octoprint_klipper/templates/klipper_settings.jinja2:46
#: octoprint_klipper/templates/klipper_settings.jinja2:48
msgid "Fontsize"
msgstr "Fontgröße"

#: octoprint_klipper/templates/klipper_settings.jinja2:53
msgid "Klipper Config Directory"
msgstr "Klipper Konfig Pfad"

#: octoprint_klipper/templates/klipper_settings.jinja2:59
msgid ""
"The filename of the base config that Klipper is loading. (default is "
"printer.cfg)"
msgstr ""
"Der Dateiname der Haupt-Konfigurationsdatei, die Klipper läd.(Standard "
"ist printer.cfg)"

#: octoprint_klipper/templates/klipper_settings.jinja2:59
msgid "Klipper Base Config Filename"
msgstr "Klipper Haupt-Konfigurationsdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:65
msgid "Klipper Log File"
msgstr "Klipper Logdatei"

#: octoprint_klipper/templates/klipper_settings.jinja2:71
msgid "Configuration Restart Command"
msgstr "Konfiguration Neustart Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:78
msgid "The command that is executed if you want to restart klipper."
msgstr "Der Befehl, der ausgeführt wird, um Klipper neu zu starten."

#: octoprint_klipper/templates/klipper_settings.jinja2:80
msgid "Restart klipper on editor save?"
msgstr "Klipper neu starten nach speichern im Editor?"

#: octoprint_klipper/templates/klipper_settings.jinja2:81
msgid "Restart Klipper on editor save?"
msgstr "Klipper neu starten nach speichern im Editor?"

#: octoprint_klipper/templates/klipper_settings.jinja2:83
msgid "Show Confirmation before restarting Klipper?"
msgstr "Zeige Bestätigung vor Klipper Neustart?"

#: octoprint_klipper/templates/klipper_settings.jinja2:84
msgid "Confirmation before restarting Klipper?"
msgstr "Bestätigung vor Klipper Neustart?"

#: octoprint_klipper/templates/klipper_settings.jinja2:89
msgid "Config Backup"
msgstr "Konfig Sicherungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:91
#: octoprint_klipper/templates/klipper_settings.jinja2:92
msgid "Show Backups"
msgstr "Zeige Sicherungen"

#: octoprint_klipper/templates/klipper_settings.jinja2:101
msgid "These macros are only meant to be used in OctoPrint."
msgstr "Diese Makros sind nur für OctoPrint gedacht."

#: octoprint_klipper/templates/klipper_settings.jinja2:102
msgid "They are not the ones that can be defined in the printer.cfg."
msgstr "Es sind nicht die, die in der printer.cfg definiert werden können."

#: octoprint_klipper/templates/klipper_settings.jinja2:108
msgid "Add macro button to:"
msgstr "Zeige Makroschaltfläche auf:"

#: octoprint_klipper/templates/klipper_settings.jinja2:109
#: octoprint_klipper/templates/klipper_settings.jinja2:123
msgid "Klipper Tab"
msgstr "Klipper Reiter"

#: octoprint_klipper/templates/klipper_settings.jinja2:110
#: octoprint_klipper/templates/klipper_settings.jinja2:126
msgid "Sidebar"
msgstr "Seitenleiste"

#: octoprint_klipper/templates/klipper_settings.jinja2:135
msgid "Command"
msgstr "Befehl"

#: octoprint_klipper/templates/klipper_settings.jinja2:148
msgid "Add Macro"
msgstr "Makro hinzufügen"

#: octoprint_klipper/templates/klipper_settings.jinja2:153
msgid ""
"To show a dialog that asks for parameters you can write your macro like "
"in the following example:"
msgstr ""
"Um ein Dialog anzeigen zu lassen, welches nach Parametern fragt, kann man"
" ein Makro wie im nächsten Beispiel schreiben:"

#: octoprint_klipper/templates/klipper_settings.jinja2:169
msgid ""
"This feature assists in manually leveling your print bed by moving the "
"head to the defined points in sequence.<br />If you use a piece of paper "
"for leveling, set \"Probe Height\" to the paper thickness eg. \"0.1\"."
msgstr ""
"Diese Funktion hilft beim Einstellen des Druckbettes, da "
"es die angegebenen Punkte automatisch nacheinander anfährt. <br />"
"Wenn man ein Papier zum messen nimmt, setzt man \"Messhöhe\" "
"auf die Papierstärke zBsp.: \"0.1\"."

#: octoprint_klipper/templates/klipper_settings.jinja2:173
msgid "Probe Height"
msgstr "Messhöhe"

#: octoprint_klipper/templates/klipper_settings.jinja2:179
msgid "Z-height to probe at"
msgstr "Höhe bei der gemessen wird"

#: octoprint_klipper/templates/klipper_settings.jinja2:183
msgid "Probe Lift"
msgstr "Höhe für Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:189
msgid "Lift Head by this amount before moving."
msgstr "Hebe Druckkopf auf diese Höhe vor einer Seitenbewegung"

#: octoprint_klipper/templates/klipper_settings.jinja2:193
msgid "Probe Feedrate Z"
msgstr "Geschwindigkeit Z"

#: octoprint_klipper/templates/klipper_settings.jinja2:202
msgid "Feedrate X/Y"
msgstr "Geschwindigkeit X/Y"

#: octoprint_klipper/templates/klipper_settings.jinja2:211
msgid "Probe Points"
msgstr "Messpunkte"

#: octoprint_klipper/templates/klipper_settings.jinja2:238
msgid "Add Point"
msgstr "Füge Messpunkt hinzu"

#: octoprint_klipper/templates/klipper_settings.jinja2:245
msgid "Config Files"
msgstr "Konfig Dateien"

#: octoprint_klipper/templates/klipper_settings.jinja2:259
msgid "Add new File"
msgstr "Erstelle neue Datei"

#: octoprint_klipper/templates/klipper_settings.jinja2:260
msgid "New File"
msgstr "Neue Datei"

#: octoprint_klipper/templates/klipper_settings.jinja2:262
msgid "Open last config"
msgstr "Öffne letzte Konfig"

#: octoprint_klipper/templates/klipper_settings.jinja2:263
msgid "Open last Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_settings.jinja2:289
msgid "Path to the config files."
msgstr "Pfad zu den Konfigurationsdateien"

#: octoprint_klipper/templates/klipper_settings.jinja2:315
msgid "Edit"
msgstr "Bearbeiten"

#: octoprint_klipper/templates/klipper_settings.jinja2:344
msgid "Donate"
msgstr "Spenden"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:3
msgid "Printer Profile"
msgstr "Druckerprofil"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:5
msgid "Connect"
msgstr "Verbinde"

#: octoprint_klipper/templates/klipper_sidebar.jinja2:6
msgid "Open Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:3
msgid "Messages"
msgstr "Nachricht"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:6
msgid "Open the OctoKlipper Settings"
msgstr "Öffne die OctoKlipper Einstellungen"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:16
#: octoprint_klipper/templates/klipper_tab_main.jinja2:17
msgid "Clear Log"
msgstr "Log löschen"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:26
msgid "Query Klipper for its current status"
msgstr "Aktuellen Status von Klipper anfordern"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:27
msgid "Get Status"
msgstr "Statusabfrage"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:31
msgid "Show the Editor"
msgstr "Öffne den Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:33
msgid "Show Editor"
msgstr "Öffne Editor"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:41
msgid ""
"This will cause the host software to reload its config and perform an "
"internal reset"
msgstr "Das wird die Konfigurationsdatei neuladen und die Hostsoftware neu starten"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:42
msgid "Host"
msgstr "Host"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:45
msgid ""
"Similar to a host restart, but also clears any error state from the "
"micro-controller"
msgstr "Wie der Host Neustart, aber zusätzlich wird die Firmware neu gestartet"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:46
msgid "Firmware"
msgstr "Firmware"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:52
msgid "Tools"
msgstr "Tools"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:54
msgid ""
"Assists in manually leveling your printbed by moving the head to a "
"configurable set of positions in sequence."
msgstr ""
"Unterstützt beim manuellem Bettnivellieren, <br>\n"
"da der Druckkopf nacheinander einstellbare Punkte anfährt."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:58
msgid "Determines optimal PID parameters by heat cycling the hotend/bed."
msgstr ""
"Findet optimale PID Parameter beim zyklischen Heizen des "
"Druckkopfes/-bettes."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:62
msgid "Sets a offset for subsequent GCODE coordinates."
msgstr "Setze einen Versatz für alle weiteren GCODE Koordinaten"

#: octoprint_klipper/templates/klipper_tab_main.jinja2:66
msgid ""
"Assists in debugging performance issues by analyzing the Klipper log "
"files."
msgstr ""
"Unterstützt, mit dem analysieren des Klipperlogs, beim Suchen von "
"Performanceproblemen."

#: octoprint_klipper/templates/klipper_tab_main.jinja2:67
msgid "Analyze Klipper Log"
msgstr "Analysiere Klipperlog"